INTRATONE HTEL2-00 Remote Control User Manual

1. 제품 오버view

The INTRATONE HTEL2-00 - 09-0102 remote control is a sophisticated device featuring 4 bi-technology 868 MHz channels. It integrates both Mifare and HF 868 MHz technologies, allowing for straightforward programming via the official www.intratone.info website or with a dedicated programmer (model 12-0115). A key security feature is its unique ten-digit identification number, ensuring personalized and secure operation. This remote offers an operating range of up to 10 meters and is broadly compatible with various electronic devices, including televisions, smartphones, cameras, and projectors. Measuring 6.5 x 3.8 x 1 cm and weighing only 30 grams, it is designed for portability and ease of use, providing optimal control over your compatible devices.

그림 1.1: 전면 view of the INTRATONE HTEL2-00 Remote Control.

2. 제품 특징

• 4 채널: Provides control over up to four distinct functions or devices.
• Bi-Technology: Equipped with both Mifare and HF 868 MHz technologies for versatile use.
• 쉬운 프로그래밍: Can be programmed via the official www.intratone.info website or using a dedicated programmer (model 12-0115).
• Unique Identification: Features a unique ten-digit engraved identification number for enhanced security and personalization.
• 폭넓은 호환성: Compatible with various devices including televisions, smartphones, cameras, and projectors.
• 컴팩트한 디자인: Lightweight (30 grams) and small dimensions (6.5 x 3.8 x 1 cm) for easy portability.

3. 설정

3.1 배터리 설치

The INTRATONE HTEL2-00 remote control uses an Alkaline battery. To install or replace the battery:

1. 리모콘 뒷면에서 배터리함을 찾으세요.
2. 조심스럽게 수납공간 덮개를 엽니다.
3. Insert the Alkaline battery, ensuring correct polarity (+ and -).
4. 배터리 덮개를 단단히 닫으세요.

3.2 원격 제어 프로그래밍

The HTEL2-00 remote control requires programming to function with your specific devices or access systems. Programming can be done via two methods:

• Online Programming: Visit the official INTRATONE programming web사이트에서 www.intratone.info. Follow the on-screen instructions to register your remote using its unique ten-digit identification number and link it to your desired system.
• Programmer Device: Use a dedicated INTRATONE programmer device (model 12-0115). Refer to the programmer's manual for specific instructions on how to transfer programming data to your HTEL2-00 remote.

그림 3.1: 각도 view of the remote control, showing its compact form factor.

4. 사용 설명서

4.1 Using the Channels

The HTEL2-00 remote control features four distinct buttons, each corresponding to a channel (00, 000, 0000, and 0). Once programmed, each button will activate its assigned function. To operate:

1. Point the remote control towards the receiver of the device you wish to control.
2. Press the corresponding channel button (00, 000, 0000, or 0) for the desired action.
3. The small LED indicator on the remote will illuminate briefly when a button is pressed, indicating signal transmission.

4.2 작동 범위

The remote control has a maximum operating range of 10 meters (approximately 33 feet) under optimal conditions. Factors such as obstacles (walls, furniture), radio interference, and battery level can affect the effective range.

4.3개의 호환 장치

This remote control is designed for compatibility with a range of devices, including but not limited to:

• 텔레비전
• Smartphones (with compatible receivers/adapters)
• Cameras (with compatible receivers/adapters)
• Projectors (with compatible receivers/adapters)
• Access control systems (gates, garage doors, etc., if programmed accordingly)

5. 유지관리

5.1 청소

리모컨을 청소할 때는 부드럽고 마른 천을 사용하세요. 잘 지워지지 않는 얼룩은 약간 거친 천으로 닦아내세요.amp cloth with mild soap can be used, ensuring no liquid enters the device. Do not use abrasive cleaners, solvents, or harsh chemicals.

5.2 배터리 교체

Replace the battery when the remote's performance degrades (e.g., reduced range, inconsistent operation) or the LED indicator does not light up. Refer to Section 3.1 for battery installation instructions. Always dispose of old batteries responsibly according to local regulations.

5.3 보관

리모컨은 직사광선, 극한 온도 및 높은 습도를 피해 서늘하고 건조한 곳에 보관하십시오. 리모컨을 떨어뜨리거나 강한 충격을 가하지 마십시오.

6. 문제 해결

6.1 원격 응답 없음

• 배터리 확인: 배터리가 올바르게 설치되었고 충전량이 충분한지 확인하세요. 필요한 경우 교체하세요.
• 프로그래밍 확인: Confirm that the remote control has been correctly programmed for the intended device or system. If unsure, attempt to reprogram it via www.intratone.info.
• 시선: 리모컨과 수신기 사이에 장애물이 없는지 확인하세요.
• 근접성: Move closer to the device you are trying to control, ensuring you are within the 10-meter operating range.

6.2 Reduced Operating Range

• 배터리 부족: A weak battery can significantly reduce the remote's range. Replace the battery.
• 간섭: Other electronic devices operating on similar frequencies (868 MHz) can cause interference. Try moving away from such devices.
• 장애물: Thick walls, metal objects, or other physical barriers can block the signal.

6.3 LED Indicator Not Lighting Up

• 배터리 문제: 배터리가 방전되었거나 잘못 삽입되었을 수 있습니다. 배터리를 확인하고 교체하십시오.
• 버튼 오작동: If only one button's LED doesn't light up, that specific button might be faulty.

7. 사양

8. 보증 및 지원

Specific warranty information for the INTRATONE HTEL2-00 remote control is not provided in this manual. For details regarding warranty coverage, terms, and conditions, please refer to the product packaging or contact INTRATONE customer support directly.

For technical support, programming assistance, or any other inquiries, please visit the official INTRATONE web사이트를 방문하거나 고객 서비스 부서에 문의하세요.

• Website for Programming & Information: www.intratone.info
• 제조사 연락처: Please refer to the INTRATONE official web해당 지역의 연락처 정보는 사이트에서 확인하세요.