USAutomatic LCR 2-Button Basic Transmitter Instruction Manual

USAutomatic LCR 2-Button Basic Transmitter Instruction Manual

USAutomatic-로고

USAutomatic LCR 2-Button Basic Transmitter

USAutomatic-LCR-2-Button-Basic-Transmitter-PRODUCT

일반 정보

  • 이 송신기는 자동 개방 시스템과 도난 방지 시스템을 제어하도록 설계되었습니다.
  • 작동 주파수는 433.92MHz입니다.
  • During installation, the receiver must be connected to the device it controls (gate, rolling shutters, awnings, anti-burglar appliances, lighting).
  • 송신기 보안 코드는 9개의 3단 딥스위치를 통해 생성됩니다. 이를 통해 최대 19,683개의 코드 조합이 가능합니다.
  • 이 송신기 유형의 모든 수신기는 여러 송신기의 코드를 수신기의 메모리에 저장할 수 있습니다.
  • Each transmitter ( or its different buttons) can also be stored into multiple receivers to perform additional functions. 99/5/CE, 89/336/CEE, 73/23/CEE and with the Part 15 of FCC Regulations.

기술 사양

  • Number of keys: Supply: 2 / 4
  • 배터리 유형: 1 Alkaline Battery 12V type 23A
  • 배터리 수명: 12~18개월
  • 현재 소비량: 25mA
  • 작동 주파수: 433.92MHz
  • 코드 조합: 19683
  • 조정: 마스크
  • Rated e.r.p.: 50~100μW
  • 여유 공간 범위: 180 – 360 피트
  • 작동 온도: 0 – 130 ° 화씨
  • 전체 치수: 3.26 x 1.88 x 0.62 인치
  • 무게: 20그램

주요 특징

USAutomatic-LCR-2-Button-Basic-Transmitter-FIG- (1)

  • 2 button dip-switch transmitter: 품목 030210
  • 4 button dip-switch transmitter: 품목 030212

보안 코드

  • 배터리와 딥 스위치에 접근하려면 액세스 패널을 왼쪽으로 밀어주세요.
  • 딥 스위치의 위치에 따라 보안 코드가 생성됩니다. 주의: 각 송신기는 공장 출고 시 기본 코드가 설정되어 있습니다.
  • 무단 접근을 방지하려면 딥 스위치의 위치를 ​​무작위 패턴으로 변경하여 이 코드를 변경해야 합니다. 여러 대의 송신기에서 동일한 스위치 패턴을 사용하여 프로그래밍을 간소화할 수 있습니다.

프로그램 작성

  • 사용하기 전에 송신기 코드를 수신기 메모리에 저장해야 합니다.
  • 사용하려는 송신기의 버튼을 길게 누르세요. 송신기 버튼을 누른 상태에서 수신기의 해당 프로그래밍 버튼(P1 또는 P2)을 누르세요. 수신기 표시등이 켜지면 완료입니다. 동일한 보안 코드로 설정된 다른 송신기도 이 시점에서 프로그래밍됩니다.
  • 추가 기능에 대해서는 딜러나 유통업체에 문의하세요.

배터리 및 딥 스위치 액세스

  • 배터리에 접근하려면 액세스 패널을 왼쪽으로 돌리세요. 23A 알카라인 배터리를 두 접점 사이에 넣으세요. 케이스 바닥에 표시된 대로 극성이 올바른지 확인하세요.
  • 메모: 사용한 배터리는 유해 폐기물이므로 올바르게 폐기해 주세요.

USAutomatic-LCR-2-Button-Basic-Transmitter-FIG- (2)

보증

USAutomatic, LLC warrants this product to be free of defects in materials and workmanship for 1 YEAR. For a period of 1 YEAR following purchase, USAutomatic, LLC. will repair or replace the product free of charge, including parts, shop labor and return to customer shipping and handling.
이 1년 보증은 플라스틱 케이스의 정상적인 마모 또는 오용으로 인한 손상에는 적용되지 않습니다.
To have the product sent for warranty consideration, it must be returned with the proof of purchase and a return authorization number. To obtain a return authorization number please call 1-888-204-0174 for assistance. The return authorization number must be clearly marked on the outside of the return package or it may not be accepted.

유형: SETDS39433
FCC ID : PWJDS433
이 장치는 부품을 준수합니다. FCC 규정 15조

운영은 다음 두 가지 조건에 따라 이루어집니다.

  1. 이 장치는 유해한 간섭을 일으키지 않으며,
  2. 이 장치는 원치 않는 작동을 유발할 수있는 간섭을 포함하여 수신 된 간섭을 수용해야합니다.

알아채다: Any changes or modifications to this equipment not expressly approved by USAutomatic could void the user’s authority to operate this equipment.

연락처 정보

문서 / 리소스

PDF thumbnailLCR 2-Button Basic Transmitter
Instruction Manual · 030210, 030212, LCR 2-Button Basic Transmitter, LCR, 2-Button Basic Transmitter, Basic Transmitter, Transmitter

참고문헌

질문하기

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

질문하기

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.