SwitchBot 릴레이 스위치 2PM 사용자 매뉴얼

SwitchBot Relay Switch 2PM

사양

• 펌웨어 버전1.0
• 하드웨어 버전0
• 자격증 IDCSA2463BMAT44270-24
• 인증됨 날짜10/09/2024
• 제품 ID0x07ef
• 공급업체 ID0x1397
• 규정 준수 문서 Download Compliance Document
• TIS/TRP Tested: 예
• 사양 버전1.0
• 전송 인터페이스 와이파이
• Primary Device 유형 ID0x000E

주요 특징

1. Dual Control: Relay Switch 2PM has two independent channels, allowing control of two devices simultaneously, like lights or sockets.
2. Power Monitoring: It monitors real-time power consumption, helping optimize energy use. Historical data is available through the app.
3. Wi-Fi Connectivity: No extra hub needed; it connects directly to your home Wi-Fi for remote control.
4. Scheduling and Scenes: Supports timers and custom scenes for automated operations, enhancing convenience.
5. Voice Control: Compatible with Alexa, Google Assistant for hands-free control.
6. Overload Protection: Protects against overheating and overload for safe operation.

Relay Switch 2PM is ideal for lighting, appliance control, and energy monitoring, offering a flexible smart home solution.

안전 경고

1. Never perform installation or maintenance while powered; always disconnect power before operation.
2. Avoid use in humid environments to prevent short circuits.
3. Do not operate beyond rated load capacity to avoid equipment damage.

제품 정보

• 제품 이름 스위치 릴레이
• 상표 아니요

사용 설명서

1. Verify correct wiring connections before powering on.
2. Press the switch to activate the device; the indicator light illuminating indicates normal operation.
3. When turning off the switch, disconnect power first before operation.

지침

1. Ensure secure and stable mounting during installation to prevent loosening.
2. Do not disassemble the housing arbitrarily, as this may impair performance.
3. Avoid exposure to high temperatures and strong magnetic fields.

기능 종료view

1. Controls circuit on/off to enable automated operation.
2. Provides overload protection to ensure equipment safety.
3. Delivers rapid response to enhance operational efficiency.

문제 해결

1. Failure to start: Check whether the power supply is connected.
2. Indicator light not illuminating: May indicate internal wiring failure.
3. Slow response: Clean dust accumulation or verify whether load exceeds the rated capacity.