PIZZELLO Rectangular Dining Table

명세서

• Designed for durability, weather resistance, and low maintenance
• 적합한 for both indoor and outdoor spaces
• 온도 범위: -104 to -140 (-40 to 60)
• 조립 시간: 최대 30분

제품 사용 지침

부품 목록:

List of parts A-N with quantities and sizes.

필요한 도구:

• 앨런 렌치(제공됨)
• Open-end wrench (Provided)

조립 설명서

• 1단계: Connect panel E and panel D using screw G and nut N. Ensure correct connection by checking for 4 silver screw heads in the middle of the table.
• 2단계: Assemble parts C, Cupright, F, and L screws as instructed.
• 3단계: Continue assembling part F with part B using L screws.
• 4단계: 연결된 B 부품과 C 부품을 나사 J를 사용하여 테이블 상판에 부착합니다.
• 5단계: Connect part A with parts B and C using screws J and H. Secure with screw H from the inside.

Patio Bistro Chair

• Follow the labeled legs for the front side indication
• Assemble on a flat surface to avoid scratches
• Do not dispose of the original box until you confirm the product
• Contact after-sales service for product return

소개

• Thank you for choosing our rectangular dining table! This table is designed for durability, weather resistance, and low maintenance, making it a great addition to both indoor and outdoor spaces.
• To ensure long-lasting use and maintain its quality, please read and follow the usage precautions below.

사용상의 주의사항

주목

• 내열성: The table can withstand temperatures between -104℉ to -140℉ (-40℃to -60℃）. Avoid placing high-temperature objects (such as grills or hot pots) directly on the surface to prevent damage. Using heat-resistant mats is recommended.
• 장시간의 태양 노출을 피하세요: While our table is weather-resistant, extended exposure to strong sunlight may cause fading or slight warping. Covering the table with a cloth or protective cover when not in use is advised.
• 예방하다 긁힘: Avoid using sharp objects such as knives directly on the table surface to prevent scratches.

필요한 도구

조립 요구 사항

부품리스트

조립 지침

1. 1단계
   • 나사 G와 너트 N을 사용하여 패널 E와 패널 D를 연결하십시오.
   • 메모: E 부품이 올바르게 연결되면 테이블 중앙에 은색 나사 머리 4개가 보일 것입니다.
   • 설치하기 전에 확인해 주세요.
   • A) E 부품이 올바르게 연결되면 테이블 중앙에 은색 나사 머리 4개가 보일 것입니다.
   • B) E 부품이 잘못 연결되면 테이블 측면에 은색 나사 머리 4개가 보이고 다음 단계에서 문제가 발생할 수 있습니다.
2. 2단계
   1. Stand parts C and Cupright at a 90-degree angle to the ground or easier installation.
   2. 부품 F의 한쪽 끝을 부품 C에 삽입하고 구멍을 맞춘 다음 L자형 나사 두 개로 고정합니다.
3. 3단계
   • Insert the other end of part F into part B, align the holes, and secure it with two L screws
4. 4단계
   • 연결된 B 부품과 C 부품을 나사 J를 사용하여 테이블 상판에 부착합니다.
5. 5단계
   • Use screws J and H to connect part 2 (A) parts with parts B and C.
   • (Secure with screw H from the inside)
   • Secure with screw H from the inside

PATIO BISTRO CHAIR

고객님, 안녕하세요,

• Thank you for choosing our product. Please read this manual carefully before assembling or using the product, to avoid damage caused by improper use.
• If the product is passed on to third parties, this manual has to be passed on along with the product. For any questions, don’t hesitate to contact us.

필요한 도구

조립 요구 사항

부품 목록

• Fasten screws loosely during initial assembly. Do not firmly tighten screws until step 7.

조립 설명서

• 팁: We have labeled the legs to indicate which side is the front side.
• However, the factory sometimes mislabeled them. Please check with the picture before installing; the straighter side should be the front side.

주목

• When installing, we suggest you can assemble the product on the flat carton which comes with the product, or any other clean floor to avoid the product surface being scratched.
• Please do not dispose of the original product box until you confirm you received the complete and correct item.
• If you want to return the product, you are suggested to contact our after-sales service first. You need to pack the returned product with the original box and then follow the steps to return it.
• 단계 1: Connect the beam (E) and the left front leg (A). Use the screw (G) and nut (F) to connect them.
• Please don’t tighten the screws yet.
• 단계 2: Connect the beam (E) andthe  Right Front Leg (B). Use the screw (G) and nut (F) to connect them.
• Please don’t tighten the screws yet.
• 단계 3: Attach the chair seat (C) to the Left Front Leg (A) and the Right Front Leg (B).
• Please make sure you attach the seat from the correct direction.
• 4단계: Use the 4 scresw (G) and 4 nuts (F) to connect them.
• 단계 5: Remove the 2 protective cases on the seat (C).
• 단계 6: Assert the seat back (D) to the seat (C).
• 단계 7: 모든 나사와 너트를 조입니다.

How To Replace The Back And Seat

• A: Slowly take apart the back of the back frame.
• B) Slowly take apart the seat from the seat frame.
• 메모: When replacing the new seat and back, make sure you assemble them from the correct direction. The edge with round angle should face outside.

자주 묻는 질문

Can I use the dining table outdoors?

Yes, the table is designed for both indoor and outdoor use. It is weather-resistant.

What is the weight capacity of the patio bistro chair?

의자의 무게는 265파운드입니다.

문서 / 리소스

PIZZELLO Rectangular Dining Table [PDF 파일] 사용설명서 Rectangular Dining Table, Rectangular Table, Dining Table

참고문헌

• 사용자 설명서