NYXI HYPERION3 Magnetic Split Controller Instruction Manual

NYXI HYPERION3 Magnetic Split Controller

Dear Gamer,  Thank you for purchasing our product. Before you use the product, please read the product manual carefully.

호환성
Supports Switch2 host system 20.0 and above

패키지 내용

Left controller xl, right controller xl, rechargeable center bridge xl, replaceable D-pad xl, USB-C charging cable xl, product user manual (warranty card) xl

기술적 매개변수

게임 컨트롤러

• 제품 모델: NS-202
• 제품 코드: 뉴저지22
• 재료: ABS
• 무게: 215g (for left and right controllers together)
• 입력: 5V=500mA
• 운영 볼륨tage: 3.7V
• 충전 전류: 400mA
• 배터리 용량: Left Controller: 600mAh
• 오른쪽 컨트롤러: 600mAh
• 작동 전류: Without Motor Vibration: ~60mA
• With Motor Vibration: ~lOOmA
• 치수: Left Controller: 61.2*116.7*52.2 mm
• 오른쪽 컨트롤러: 61.2*116.7*52.2mm

Canter Bridge

• 재료: ABS
• 무게: 50g
• 입력: 5V==l000mA
• 운영 볼륨tage: 5V
• 작동 전류: 붐마
• Charging Current (per side): 200mA
• 치수: 115.6*46*16mm

제품 설명

Connection Tutorials

NS2
필요한 시스템: 버전 20.0 이상

유선 연결
Align the left controller’s ‘-‘ key and the right controller’s ‘+’ key upwards, then magnetically attach them to the corresponding magnetic ports on both sides of the console. The console will indicate a successful match with a connection animation on both sides.

블루투스 연결
Power on the Switch 2 console. On the main interface, tap the controller icon with your finger, then select the “Change Grip/Order” screen. Press and hold the SYNC button on the left (or right) controller for 3 seconds until the RGB indicator flashes rapidly, entering Bluetooth pairing mode. The console will automatically search for and pair with the controller. After successful connection, the controllers’ RGB indicators will display solid lights in the following channel colors:

채널 1 : 솔리드 오렌지
채널 2 : 솔리드 그린
채널 3 : 솔리드 블루
채널 4 : 솔리드 퍼플

블루투스 재 연결
After initial pairing, if the controller is in sleep mode and the console is on, press any button (except L3, R3, TURBO) to reconnect via Bluetooth. (Note: Avoid touching the joysticks during reconnection.)

Bluetooth Wake-up
After initial pairing, if both the console and controller are in sleep mode, press the Home button on the right controller to wake up the console and reconnect.

Keylinker App 연결 앱 QR 코드 :

1. Use a mobile browser to scan the QR code or search for “Keylinker” in your app store to download and install.
2. After installation, upon first launch, the app may request relevant permissions; grant them as prompted.
3. Connect your phone’s Bluetooth in Android/iOS mode, find the device named “NYXI NJ22”, and tap to pair.
4. After a successful connection, tap the settings button next to the device name to enter the controller customization interface.
5. Buttons can be remapped to any other key. Joystick and trigger curves can be adjusted. Motor vibration intensity can be modified. Turbo function speed can be set. Macro programming allows adjusting interval times. Power-off timing and other settings can also be configured.
6. After modifying functions, click “Apply” to save the changes.

기능 안내

터보 기능
Assign Turbo: On the left controller, hold the Turbo button+ UP, DOWN, LEFT, RIGHT, ZL, or L. On the right controller, hold Turbo+ A, B, X, Y, ZR, or R to assign turbo to that button. Then hold that assigned button to enable rapid-fire. The RGB indicator flash frequency matches the turbo speed.

• 왼쪽 컨트롤러:
• 오른쪽 컨트롤러:
  

자동 터보: Press and hold the left Turbo button+ UP, DOWN, LEFT, RIGHT, ZL, L (for left controller) or the right Turbo button + A, B, X, Y, ZR, R {for right controller) again to set the corresponding buttons to auto turbo mode.

• 왼쪽 컨트롤러:
• 오른쪽 컨트롤러:

터보 취소: Press and hold the left Turbo button+ UP, DOWN, LEFT, RIGHT, ZL, L (for left controller) or the right Turbo button+ A, B, X, Y, ZR, R (for right controller) again to cancel the turbo function for the corresponding buttons.

• 왼쪽 컨트롤러:

오른쪽 컨트롤러:모두 지우기 터보: Press and hold the left Turbo button (for left controller) or the right Turbo button (for right controller) for 5 seconds. The controller will vibrate for l second, indicating that all turbo assignments for that controller have been cleared.터보 속도 조정: There are three adjustable speeds: Fast/ Medium/ Slow. To increase the turbo frequency, hold Turbo+ push the joystick up. To decrease, hold Turbo+ push the joystick down. The default speed is Medium. The controller will vibrate briefly each time the turbo speed is adjusted.

Back Button Mapping & Macro Programming
The two customizable buttons GUGR on the back of the controller can be mapped to specific function keys (GL can be mapped to: UP, DOWN, LEFT, RIGHT, L, ZL, L3, -; GR can be mapped to: A. B, X, Y, R, ZR, R3, +). Operation Steps:
1-While connected to the host, hold the TURBO button and press the GL/GR button once, then release to enter the GL/GR button customization mode. The RGB indicator will flash white rapidly, and the controller will vibrate for l second as a reminder.

• After entering GL (or GR) button customization mode, press a desired function key (e.g., L button for GL or A button for GR). The lit indicator will flash once, confirming that the key has been mapped to the corresponding GL/GR button. Press the GL (or GR) button again to exit customization mode for that controller. The controller will vibrate for l second, and the RGB indicator will return to its original channel indication. Follow the above steps to set the GL/GR buttons.
• During customization, multiple function keys can be input in sequence for a single GL/GR button, then press the GL/GR button again to exit and save as a macro key. In-game, pressing this key will execute the sequence according to the interval times set during programming. When GL/GR is used as a macro key, a single custom button can store up to 21 key inputs. Once 21 keys are entered, the macro will be saved automatically, and the programming mode will exit, restoring the current channel indicator.
• Clearing GL/GR Custom Button Functions: While connected to the host, hold the TURBO button and press the GL/GR button once, then release to enter GL/GR customization mode. The RGB indicator will flash white rapidly, and the controller will vibrate for l second. Briefly press the GL/GR button to clear the custom functions assigned to it. A successful clear is indicated by l second of vibration. After clearing, the button will return to a no-function state.

진동 강도 조정

1. The vibration intensity of the grip motors can be adjusted to 3 levels (Off/Low/High). The factory default is Low, and the Off level disables vibration.
2. For the left or right controller, hold the TURBO button and push the joystick left (decrease) or right (increase) to adjust the grip vibration intensity. The levels cycle through Off? Low? High. After each adjustment using the combo, the controller will vibrate at the corresponding intensity for l second. When set to Off, there will be no vibration. The current vibration intensity will be remembered even after the controller is powered off.

RGB 조명

1. Hold the TURBO button and single-press the left controller’s – button or the right controller’s + button to cycle through one mode per press. There are multiple lighting effect modes, including eight solid color modes (Red, Orange, Yellow, Green, Blue, Indigo, Purple, Pink) and one mixed-color mode (the four LEDs are: top-left Yellow, bottom-left Blue, top-right Red, bottom-right Green).
2. Hold the TURBO button and double-press the left controller’s L3 or the right controller’s R3 button to turn off all RGB lighting (including the RGB joystick ring and RGB channel indicator).
   • Press the same combination again to activate mixed-color breathing mode (LEDs: top-left Yellow, bottom-left Blue, top-right Red, bottom-right Green).
   • Press the combination a third time to activate mixed-color flowing light mode (Yellow, Blue, Red, Green) – the left joystick ring flows clockwise, and the right joystick ring flows counter-clockwise.
3. Hold the TURBO button and press and hold the left controller’s L3 or the right controller’s R3 button. The brightness will cycle from dim to bright. Release the button to set the brightness to the current level. Each operation is confirmed by a vibration prompt. The controller will remember the last lighting effect state (except in lock mode, where it will revert to mixed-color flowing light mode upon the next power-on).

전원 켜기/끄기

• Power On (Reconnect): In off state, press any button to power on and enter reconnect mode.
• Power On (Pairing): In off state, hold SYNC for 3 seconds to power on and enter pairing mode.
• Power Off: In on stats, hold the left controller’s Capture button / right controller’s Homs button for 3 seconds.
• Immediate Power Off: In on state, short-press the SYNC button. Auto Power Off: The controller will power off if the connected host enters sleep mode or turns off Bluetooth

배터리 부족 경고
배터리 부족 경고: 컨트롤러의 배터리 용량이 부족할 때tage drops below 3.5V during connected use, the RGB indicator flashes red rapidly to warn that the controller needs charging. If the voltage falls below 3.4V, the controller automatically shuts down.

자동 수면
When connected to a host, the controller enters sleep mode after 10 minutes of inactivity. (Sleep timer can be adjusted in the App.)

충전 중

• Via Console Charging: Magnetically attach controllers to the sides of the Switch2 console. While the console is charging via its adapter, the controllers also charge. The RGB indicator breathes in its current color and stays solid when fully charged.
• Via Controller’s USB Port Charging: Connect USB cable directly to the controller. The RGB indicator breathes red while charging and turns off when fully charged. (Note: Cannot charge via controller’s USB port while connected to a host.)
• Via Center Bridge Charging: Connect a charger to the center bridge’s charging port. Both left and right charging indicators on the bridge will flash red for 0.5s, then green for 0.5s, then turn off, indicating successful self-test and standby mode. Place a controller into a charging slot; its corresponding indicator lights solid red. It turns solid green when fully charged. Removing the controller turns off its indicator.

다시 놓기
If the controller malfunctions (e.g., button confusion, freeze, or connection failure), try resetting it.
방법: Press and hold the HOME or Capture button for 10 seconds, or short-press the SYNC button to reset the controller state.

잠금 모드
활성화: With the controller off, press and hold the SL+ SYNC (MODE) buttons for 5 seconds. After the RGB indicator flashes red slowly 3 times, the controller enters lock mode. Pressing any button will not wake it.
비활성화: Connect the controller to a host magnetically or plug in a USB cable for charging. This exits lock mode, allowing wake-up via any button.

자이로스코프 교정
왼쪽 컨트롤러: In sleep mode, press the combo [L+ UP+ CAP (Capture button)) simultaneously. Enter calibration mode (RGB indicator flashes cyan slowly). Place the controller flat on a level surface/in a jig. Press ([-] , wait a moment to exit calibration mode. Calibration complete.
오른쪽 컨트롤러: In sleep mode, press the combo [R + X + HOME] simultaneously. Enter calibration mode (RGB indicator flashes cyan slowly). Place the controller flat on a level surface/in a jig. Press [+, wait a moment to exit calibration mode. Calibration complete. Alternative Method via Host: On the console, go to Settings > Controllers & Sensors> Calibrate Motion Controls, then press and hold “+” or -.

조이스틱 보정
After connecting to the host, go to Settings > Controllers & Sensors > Calibrate Control Sticks to calibrate the joysticks.

펌웨어 업그레이드

1. 0TA via Phone: Connect to the Ksylinksr App and use the OTA upgrade option in the menu.
2. Via PC Software: Start the latest firmware upgrade software on a PC. With the controller off, hold the L3 (left joystick) or R3 (right joystick) button, then connect via USB cable. Once the “Upgrade” button becomes clickable, click it to start the upgrade.
3. Firmwars upgrades do not override the controller’s saved settings

지침

기호는 제품을 가정용 쓰레기와 함께 폐기해서는 안 되며 재활용이 가능하도록 적절한 수거 장소로 가져가야 함을 의미합니다. 현지 규정에 따라 제품이나 충전 배터리를 일반 가정용 쓰레기와 함께 폐기하지 마세요. 사용한 제품과 충전 배터리를 적절하게 폐기하면 환경과 인간 건강에 대한 부정적인 영향을 방지하는 데 도움이 됩니다.

• 액체에 노출시키지 마십시오.
• 분해하지 마세요
• 그것을 떨어뜨리지 마십시오
• 매우 높거나 낮은 온도는 피하세요