MULTIBRACKETS 5605 Wall Bracket
사양
- 제품: MULTIBRACKETS 5605 Universal Wall Bracket / Long Reach Arm Mount
- 유형: Full-motion articulating TV wall mount (dual arm long-reach swivel)
- 색상: 블랙 메탈 마감
- 재료: Heavy-duty solid steel construction
- 화면 호환성: Fits most flat-panel TVs 65″ – 110″ diagonal
- Max screen diagonal: ~279 cm (110″)
- 중량 용량: Up to 125 kg (~275 lbs) load support
- VESA 지원: Compatible with most VESA patterns from 100×100 mm up to 800×600 mm
- Movement & Adjustment: Full-motion swivel, tilt, and rotate at multiple pivot points
- 기울기 범위: approx. -5° to +10°
- Swivel/rotation: approximately 60° to +60°
- Extension from wall: up to 980 mm (~38.6″)
- 특징:
- Dual long-reach arms for flexible view위치 지정
- Smart cable management system to hide cables
- Partially pre-assembled with a full hardware kit included
- 설치 유형: Wall mount, articulating bracket
- 색상: 검은색
중요한!
Your Plasma. LCD. TV, Projector, Projector Screen, or other HiFi equipment represents a considerable value.
If screws are Included they may not be suitable for the material of your wall, ceiling, or floor. Replace the screws with suitable ones if needed.
In case you are unsure regarding any aspects or the mounting of this product,t please
전문가와 상의하세요.
경고!
언제나 확인하다 그만큼 깊이 of 그만큼 구멍 ~ 전에 시작하다 an 설치.
Fits most 65″-110″ flat panel TV
- Weight capacity: 125kg/275 lbs
- VESA compliance: 100×100 200×200 300×300 400×200 400×400 600×400 800×600
경고
부적절한 설치 또는 조립으로 인해 심각한 부상 및 재산 피해가 발생할 수 있습니다. 시작하기 전에 다음 경고를 주의 깊게 읽으십시오.
- 제품은 전문가가 설치해야 합니다.
- 지침을 이해하지 못하거나 우려 사항 또는 질문이 있는 경우 자격을 갖춘 현지 설치 기사에게 문의하십시오.
- 제품이나 철물이 손상되거나 분실된 경우에는 설치, 조립하지 마세요. 교체 부품이 필요한 경우 현지 대리점에 문의하여 도움을 받으십시오.
- This product fits most65″-11D”LCD and plasma screens; maximum weight of LCD /plasma screen: 125kg.
- This product has been designed for use on masonry (solid concrete, 2000 PSI density minimum).
- For safe installation. The wall you are mounting to must support a minimum of 3 times the weight of the total load (the mount, the TV, and all accessories).
- 원래 설계된 용도 이외의 용도로 이 제품을 사용하지 마십시오.
- This product contains moving parts; please use it with caution.
- When installing a flat panel display, please do not damage the electrical wiring or the power source.
- 제조업체는 수직 벽에 설치하거나 이로 인해 발생하는 우발적 또는 결과적 손상에 대해 책임을 지지 않습니다.
- 제조업체는 수정, 부적절한 설치 또는 지정된 중량 범위를 초과하는 설치에 대해 어떠한 책임도 지지 않습니다.
- The manufacturer will not be liable for any damages arising out of the use of, or inabilityto use, the product.
지난 목록
설치
INSTALLATION OPTION 1: Wood Stud Installation (Suitable for 16″ or 24″ apart studs)
- Use a stud finder to locate the drywall studs and mark the desired installation locations with a pencil.
- 벽 플레이트 템플릿(BB)을 원하는 설치 위치의 벽에 부착합니다.
- Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall. Attempt to locate the lag bolt locations in the middle of the studs.
- Use a 7/32″ (5.5mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm).
Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.
Secure the Wall Plate to the wall with 6 x Lag Bolts ( H) and 6 x Washers (H).
메모: Do not use Wall Anchor (I) for wood stud installation.
설치 옵션 2: 콘크리트/벽돌 벽 설치
- 벽 플레이트 템플릿(BB)을 원하는 설치 위치의 벽에 부착합니다.
- Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall.
- Use a 3/8″ (10 mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm). Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.
6 x 벽 고정 장치(I)를 구멍에 삽입합니다. 6 x 래그 볼트(H)와 6 x 와셔(H)를 사용하여 월 플레이트를 벽에 고정합니다.
This full motion TV wall mount comes with a sliding mechanism that allows the arms and the TV to slide horizontally left or right for up to 15. 7 inches, while the wall plate is stationary on the wall. This feature allows the TV to be placed at an optimal position, regardless of the position of the wall studs. The mount will ship with the locking bars installed in place at their center position. If the sliding function will be used, take off the locking plates by removing the bolts that hold them in place.
Place the top locking bar at the desired position to fix the left slide limit of the arms, and place the bottom bar at the desired position to fix the right side limit of the arms. The raised metal piece at the end of the locking bars limits the slide of the arms. Ensure the locking bars are oriented correctly to ensure both the left and right side locking bars correctly limit the slide. Ensure both of the bolts are tightened at each locking bar’s position to prevent the arms from sliding off the wall plate.
경고: FAILURE TO INSTALL THE LOCKING BARS ADEQUATELY MAY RESULT IN THE ARMS AND THE TV FROM SLIDING OFF THE WALL PLATE.
Attaching the TV to the Mount (For Displays With Smaller Bolt Hole Patterns)
For TVs with smaller bolt hole patterns of VESA 100×100, 100×200, 200×100, and 200x200mm, the TV can be mounted directly on the plate, without the extension bars.
거치대에 TV 부착하기 (볼트홀 패턴이 큰 디스플레이의 경우) VESA 300×300,400×200,400×400,600×400, 800×600 mm의 볼트홀 패턴이 큰 TV의 경우 TV 브라켓과 연장 바를 사용하여 마운트에 TV.
Attach the 2 x TV Brackets to the back of the TV by using screws A+E, B+E, C+E, or Dor G.
메모: The hardware packet provided fits most TVs in the market. If your TV requires different hardware, please contact us at 마운트잇닷컴 to procure additional hardware kits.
Ensure the screws are adequately engaged with the screw holes on the TV.
Do not overtighten the screws. Ensure the TV brackets sit flat with the back of the T.V.
Hangina g TV On The Wall Mount Arms
Lift the TV (two persons recommended) and hang the TV brackets onto the wall mount extension bars.
마운트에 TV 고정
Secure the TV brackets on the mount by attaching the 4 x AA Safety Brackets with 4 x F Screws as shown ointhe image.
메모: AA 안전 브래킷으로 TV 브래킷을 마운트에 고정하지 않으면 TV가 확장 막대에서 우발적으로 떨어져 신체 또는 재산 피해가 발생할 수 있습니다.
레벨링 조정 -5° – +5°
The mount allows up to 5 degrees of leveling adjustment post installation. To adjust the level of the TV, place a bubble level on top of the TV, loosen the 2 x G bolts located behind the VESA plate, level the TV, and tighten the 2 x G bolts to lock the TV in position.
기울기 조정 -5° – +10°
The mount can tilt down up to 10 degrees and up 5 degrees. To adjust the tilt angle of the TV, pull out the tilt adjustment levers on both sides of the mount and turn counterclockwise to loosen the screws. Adjust the tilt to the desired angle and turn the tilt adjustment lever clockwise to tighten the screws.
메모: IF THE TV TILTS DOWN AFTER A PERIOD OF USE, CHECK THE TILT ADJUSTMENT LEVER TIGHTNESS AND TIGHTEN IF NECESSARY.
암에 있는 통합 케이블 관리 클립을 사용하여 케이블을 TV 뒷면이나 측면으로 배선하십시오.
차원
보증 카드
멀티 브래킷 “™ 제한된 보증
멀티 브래킷 영장 그것은 제품 에게 be 무료 of 결함 in 재료 그리고 솜씨 ~을 위한 그만큼 제품 보증 기간.
그만큼 보증 기간 시작하다 on 그만큼 원래의 구입 날짜 of 그만큼 제품
모두 멀티 브래킷 제품 ~이다 덮여있다 by a 제한된 제품 보증
- 다섯 (5) 연령 ~을 위한 금속 동영상 감시 장치 mounts, 모두 랙그리고 non-electrical 고문 부속품
- 둘 (2) 연령 ~을 위한 gaslifts 그리고 sit-stand 워크스테이션
- 하나 (1) 년도 ~을 위한 모두 동력화 그리고/또는 자동화 제품, 플라스틱 스피커 mounts, 모두 스피커 stands, 모두 가구, 모두목재 (MDF) 부속품
을 위한 보증 주장 만들어진 ~ 동안 그만큼 보증 기간, 멀티브래킷 ~ 할 것이다 바꾸다 어느 결함 있는 제품 부분 무료 of charge. Should a 부분 on 당신의 멀티 브래킷 제품 fail, 제발 만들다 an반품 사례 on www.multibrackets.com/support 에게 만들다 a 보증주장하다. We ~ 할 것이다 await 당신의 선적 서류 비치 그리고 그 다음에 discuss 그만큼문제 ~와 함께 너, 그리고 한 번 we confirm 그만큼 제품 is 아래에 전쟁ranty, we ~ 할 것이다 배 대사 부분품 에게 너. 이것 제한된 보증하다 ~ 아니다 씌우다 그만큼 소송 비용 of 풀이 그리고 교체하다 결함 있는 부분품~에서 당신의 멀티 브래킷 제품. 그래서, if 당신의 문제 필요함 a수리하다 technician, 너 ~ 해야 하다 지불하다 어느 노동 요금.
For warranty claims made during the Warranty Period, MULTI BRACKETS will replace any defective product part free of charge. Should a part of your Multibrackets product fail, please create an RMA case on www.multibrackets.com/support to make a warranty claim. We will await your documentation and then discuss the problem with you, and once we confirm the product is under warranty, we will ship replacement parts to you. This
Limited Warranty does not cover the costs of removing and replacing defective parts from your Multibrackets product. So, if your problem requires arepair technician, you must pay any labor charg.es This Limited Warranty extends only to the original purchaser of the product and is automatically void if your Multibrackets product is modified in any way, improperly installed, taxed beyond its stated weight capacity, or otherwise misused or abused.
All Multibrackets products are intended for indoor use only, and any outdoor use voids this Limited Warranty. The Limited Warranty for wall and ceiling mounts is void if the mount is moved from its initial installation. To the maximum extent permitted by applicable law, Multibrackets disclaims any other warranties, express or implied, including warranties of fitness for a particular purpose and warranties of merchantability. Multibrackets will not be liable for any damages whatsoever arising out of the use or inability to use itsproducts, even if Multibrackets has been advised of the possibility of such damages. To the maximum extent permitted by applicablelaw, Multibrackets disclaims any responsibility for incidental or consequential damages,
Multibrackets M Stockholm, Sweden 2016. www.multibrackets.com
The content of this manual is subject to Change wltheut further notice. The latest vers, on of this manual can be found online under the product name on the web대지: www.multibrackets.com
문서 / 리소스
 |
MULTIBRACKETS 5605 Wall Bracket [PDF 파일] 설치 가이드 5605 Wall Bracket, 5605, Wall Bracket, Wall Bracket, Wall, Bracket |