MOSS IllumaSync 소프트웨어
명세서
- 제품명: IllumaSyncTM 소프트웨어
- Compatible with: IllumaDimTM product family of LED controllers
- 제조사: Moss LED
- 연락하다: www.mossled.com | 1.800.924.1585 | 416.463.6677 |
- info@mossled.com
제품 사용 지침
단일 업로드 펌웨어 업데이트
- 기능: Upload firmware to one IllumaDimTM device at a time. This method is most successful.
- 중요한: If other devices are powered on, they may flash randomly. Power off other devices or put them in manual mode.
- RDM 기능: Press the RDM button next to each device in the list to access basic RDM functions.
장치 연결 및 검색:
- Press Connect in the Individual Update tab.
- If an error occurs, reinsert the USB and ensure the computer recognizes the device dongle.
- Press Discover All to list connected devices.
펌웨어 및 장치 업데이트를 선택하세요:
- Click Browse and choose the firmware file.
- Select the device and press Update. Expect flashing if other devices are not powered off.
대체 방법:
- Click the software version number to update a specific device.
- Factory reset your device after firmware update by holding down the BACK & ENTER buttons.
IllumaSync™ Software Guide
IllumaSync™ software is designed to work with the IllumaDim™ product family of LED controllers. The software allows for firmware updates, setting updates, and simple DMX testing and control. Too use the software, you will require three things:
- One or more IllumaDim™ Products from Moss LED™
- IllumaSync™ software from the Moss LED™ web대지
- IllumaSync™ USB Dongle
중요한
- Before you start, ensure that all devices are connected via DMX cabling and are powered on.
- It is advised to only have IllumaDim™ products on the DMX chain when operating the IllumaSync Software.
- Moss LED has not tested the effects of running the IllumaDim™ software while using non-IllumaDim™ products, and the effects are unknown.
- Moss LED cannot be held liable for any unwanted effects caused by running IllumaSync™ software on nonnon-IllumaDim™™ products.
- Plug all IllumaDim™ Products together via DMX cabling
- Plug the IllumaSync™ USB to DMX Dongle Cable into the first IlluamDim™ product in the DMX chain
- Download driver (if required) https://files.mossled.com/Software/CDM212364_Setup.zip
- Download IllumaSync software https://files.mossled.com/Software/IllumaSyncV1.zip
- Run IllumaSync™ Software
- If prompted “Windows protected your PC,” choose “More Info” followed by “Run anyway”
단일 업로드 펌웨어 업데이트
Functionality: Upload firmware to one IllumaDim™ device at a time. This method is most successful.- 중요한: If other devices are powered on, they may flash randomly. Power other devices off or put them in manual mode.
RDM Function: Press the RDM button next to each device in the list to access basic RDM functions.
If the device gets stuck in update mode, power cycle the device and try again.
Do not remove power from the device during firmware update
그룹 펌웨어 업데이트
- Functionality: Upload firmware to multiple IllumaDim™ devices at a time.
- Recommended: Use when devices are physically close together and connected with a professional DMX cable.
- RDM Function: Press the RDM button next to each device in the list to access basic RDM functions.
If the device gets stuck in update mode, power cycle the device and try again.
Do not remove power from the device during firmware update
그룹 설정 업데이트
- ™
Functionality: Configure the settings of multiple IllumaDIM™ devices simultaneously - Recommended: Use when devices are physically close together and connected with a professional DMX cable.
- RDM Function: Press the RDM button next to each device in the list to access basic RDM functions.
DMX 테스터
Functionality: IllumaSync™ can be used as a DMX tester for 1 universe at a time.
- www.mossled.com
- 1.800.924.1585 -416.463.6677
- info@mossled.com
자주 묻는 질문
질문: 기기가 업데이트 모드에서 멈춘 경우 어떻게 해야 하나요?
A: Power cycle the device and try the update process again. Do not remove power during firmware update.
문서 / 리소스
 |
MOSS IllumaSync 소프트웨어 [PDF 파일] 사용자 가이드 IllumaDimTM, USB-DMX 동글 케이블, IllumaSync 소프트웨어, 소프트웨어 |