McIntosh MX124 A V Processor Owner’s Manual

MX124
A/V 프로세서
사용 설명서
매킨토시 연구소, Inc. 2 챔버스 스트리트
Binghamton, New York 13903-2699
전화: 607-723-3512
www.mcintoshlabs.com

FCC 정보(미국 고객용)

1. 중요 공지:
이 제품을 수정하지 마십시오
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by McIntosh may void your authority granted by the FCC to use the product.
2.주의 :

• FCC RF 노출 준수 요구 사항을 준수하려면 이 제품과 모든 사람 사이에 최소 20cm의 이격 거리를 유지해야 합니다.
• 이 제품과 안테나는 다른 안테나 또는 송신기와 함께 배치하거나 함께 작동해서는 안 됩니다.

3. 규정 준수 정보:

• Product Name: MX124 A/V Processor
• 모델 번호: MX124
• This product contains FCC ID: RAXAIOS65V
  매킨토시 연구소, Inc.
  2 챔버스 스트리트
  빙햄턴, NY 13903
  전화. (607) 723-3512

IC 정보(캐나다 고객)
1. 제품:
This product contains IC: 4711A-AIOS65V This product complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions:

1. 본 제품은 유해한 간섭을 일으키지 않으며,
2. 이 제품은 원치 않는 작동을 유발할 수 있는 간섭을 포함하여 수신된 모든 간섭을 수용해야 합니다.

This Class B digital Apparatus complies with Canadian ICES-003.
2.주의 :
다른 사용자에 대한 잠재적 인 무선 간섭을 줄이려면 등가 등방성 복사 전력 (eirp)이 성공적인 통신에 허용되는 것보다 크지 않도록 안테나 유형과 그 이득을 선택해야합니다.
캐나다 고객: CAN ICES-003(B)/NMB-003(B)
RF 노출 정보
This equipment complies with FCC and ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. In order to avoid the possibility of exceeding the FCC and ISED RSS-102 radio frequency exposure limits, this equipment should be installed and operated with minimum distance 20 cm (7.9 inches) between the antenna and your body during normal operation.
사용자는 RF 노출 규정 준수를 위해 특정 작동 지침을 따라야 합니다.
레드(KO) 정보
1. 적합성 선언
당사 제품은 EC/EU 지침의 조항을 따릅니다.
LVD: 2014/35/EU
EMC: 2014/30/EU
RED: RED (EU) 2022/30 of 20 Oct 2021 supplementing Directive 2014/53/EU ERP: EC regulation 1275/2008 and its frame work directive 2009/125/EU RoHS: 2015/863/EU
2. DO NOT MODIFY THIS PRODUCT
이 설명서에 포함된 지침에 표시된 대로 이 제품을 설치할 경우 RED 지침 요구 사항을 충족합니다. 제품을 개조하면 위험한 라디오 및 EMC 방사선이 발생할 수 있습니다.
3.주의:
본 제품과 모든 사람 사이에는 최소 20cm의 거리를 유지해야 합니다.
이 제품과 안테나는 다른 안테나 또는 송신기와 함께 배치하거나 함께 작동해서는 안 됩니다.
매킨토시에서 우리 모두에게 감사합니다
귀하께서는 수년간 사용할 수 있는 정밀 기기에 투자하셨습니다.
장비의 성능을 최대한 활용하려면 잠시 시간을 내어 기능과 지침을 숙지하세요.
추가적인 기술 지원이 필요하면 다른 브랜드를 포함해 귀하의 특정 설정에 대해 더 잘 알고 있는 딜러에게 문의하세요.
추가 질문이 있거나 서비스가 필요한 경우에는 McIntosh에 문의하실 수 있습니다.
매킨토시 연구소, Inc.
2 챔버스 스트리트
빙햄턴, 뉴욕 13903
기술 지원 (607) 723-3512
팩스 (607) 724-0549
고객 서비스 (607) 723-3515
팩스 (607) 723-1917
이메일: support@mcintoshlabs.com
Web대지: www.mcintoshlabs.com
잠시만 기다려 주세요
나중에 참조할 수 있도록 여기에 일련 번호와 구매 정보를 기록할 수 있습니다. 다음과 같은 경우가 발생하는 경우 이 정보에서 구매를 식별할 수 있습니다.
일련 번호: _______________
구입 날짜: ___________________________
대리점 이름: ___________________________

소개

The McIntosh MX124 is one of the best A/V Processors ever created. Connections for both digital and analog sources are provided, offering countless ways to listen to music and movies.
The MX124 outputs have the ability to drive multiple components, and reproduce sonically transparents and absolutely accurate sound.
The MX124 comes with both Dirac and Audyssey licenses, allowing the audio optimization software to be used out of the box without further purchases.

안전이 최우선

Please read the additional document
지침: Safety – Lithium Batteries – Disposal

일반 정보

1. Do not apply AC power to the MX124, or other component(s) until they are connected to the MX124 to prevent operational  malfunctioning.
2. Do not use cleaners containing aggressive chemicals, as they will etch away at the anodized finish.
3. Balanced and unbalanced inputs and outputs can be mixed. For example, signal sources may be connected to unbalanced inputs, and send signals from the unbalanced outputs. Balanced and unbalanced outputs can be used simultaneously  when connected to different power amp정수기.
4. The MX124 internal Digital-to-Analog Converter Circuitry is designed to decode PCM, DSD Dolby, and DTS Digital signals The Coaxial and Optical digital audio inputs are for PCM Digital signals, Dolby signals, and DTS signals. The MX124 also  decodes USB and HDMI ARC/eARC digital signals. Other digital audio signal format types will cause the audio outputs of the MX124 to be muted.
5. The McIntosh MX124 is factory configured for immediate use.
6. The rear panel IR Input is configured for non-McIntosh IR sensors such as a Xantech Model DL85K Kit. When in use, consider turning off the front panel sensor to avoid interference.
7. The MX124 has been tested and certified for indoor use only.
8. For additional information on the MX124 and other McIntosh products please visit the McIntosh web사이트에서 www.mcintoshlabscom.

상표 및 라이센스

McIntosh MX124은 미국 특허 및 기타 지적 재산권으로 보호되는 저작권 보호 기술을 통합합니다. MX124은 다음 기술을 사용합니다.

상표 로고	라이센스 정보
	DTS 특허에 대해서는 다음을 참조하세요. http://patents.dts.com. Manufactured under license from DTS Inc. DTS, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc.in the United States and other countries. © 2021 DTS, Inc. ALL RIGHTS RESERVED.
	Manufactured under license from IMAX Corporation. IMAX® is a registered trademark of IMAX Corporation in the United States and/ or other countries. All Rights Reserved. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol together are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries © DTS, Inc. All Rights Reserved.
	Dolby, Dolby Audio, Dolby Atmos, Dolby Vision and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under License from Dolby Laboratories. Confidential unpublished works. Copyright © 2012-2025 Dolby Laboratories. All rights reserved.
	The MPEG-H TV Audio system logo is a trademark of Fraunhofer IIS and is registered in Germany and other countries.
	Manufactured under license from Dirac Live. Dirac Live, Dirac® and Dirac Live® are trademarks owned by Dirac Research AB.
	Manufactured under license from Audyssey Laboratories™. U.S. and foreign patents pending. Audyssey MultEQ® XT32, Audyssey Dynamic EQ® , Audyssey Dynamic Volume® and Audyssey LFC™ are registered trademarks of Audyssey Laboratories.
	Wi-Fi CERTIFIED 로고는 Wi-Fi Alliance의 등록 상표입니다. Wi-Fi 인증은 장치가 무선 LAN 장치 간의 상호 운용성을 인증하는 그룹인 Wi-Fi Alliance에서 수행하는 상호 운용성 테스트를 통과했음을 보증합니다.
	HDMI, HDMI High-Definition Multimedia Interface 및 HDMI 로고는 HDMI Licensing Administrator, Inc.의 상표 또는 등록 상표입니다.
	HDR10+™ 로고는 HDR10+ Technologies, LLC의 상표입니다.
	The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG Inc. and any use of such marks by McIntosh is under license. Other trademarks and trade names are those of their respective owners.
	Roon Ready 네트워크 장치에는 Roon의 스트리밍 기술이 내장되어 있으며 Roon Labs의 인증을 받아 네트워크 스트리밍에서 최고 수준의 품질과 성능을 제공합니다.
	Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance 표준. Apple, and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries and regions. To use AirPlay with the MX124 Streaming Audio Amplifier의 경우 최신 버전의 iOS, iPadOS 또는 macOS를 권장합니다.
	Spotify 소프트웨어는 여기에서 찾을 수 있는 제3자 라이선스의 적용을 받습니다. https://developer.spotify.com/third-party-licenses
	Qobuz Connect is a proprietary streaming technology developed by Qobuz. All related trademarks, logos, and software are the property of Xandrie SA. Unauthorized use, reproduction, or distribution of Qobuz Connect is strictly prohibited.
	TIDAL은 고품질 사운드, 고화질 영상, 전문적으로 큐레이팅된 플레이리스트 및 오리지널 콘텐츠를 제공하는 최초의 글로벌 음악 스트리밍 서비스로, 음악과 문화에 대한 신뢰할 수 있는 소스입니다.

커넥터 및 케이블

XLR 커넥터

RCA 커넥터

전원 제어 커넥터

데이터 포트 및 외부 제어 커넥터
Data Ports send converted IR commands to other McIntosh components. A 3.5 mm stereo mini phone plug is used for connections. The IR IN port also uses a 3.5 mm stereo mini phone plug and allows the connection of other brand IR receivers to the MX124. The IR receiver must provide its own power supply.

The RS232-C data cable is a 3.5 mm stereo mini phone plug used to connect to external third party controllers.

NET 포트(이더넷/10baseT LAN)
Use an Ethernet cable to connect the MX124 to a network router.
By default, the MX124 has DHCP On, and will automatically receive an IP address from the router. This setting can be changed.
Alternatively, the MX124 may be connected to a home network via wireless Wi-Fi. In this case, the Ethernet connection would not apply.
광학
The two Optical inputs allow digital sources to be connected to the MX124 using TOSLINK cables also known as “optical audio cables.” The Optical inputs can handle high resolution digital audio up to 192 kHz / 24-bit. The MX124 DAC will process standard format SPDIF PCM signals, Dolby Digital, and DTS bitstreams. Unsupported formats can result in strange and/or unpleasant sounds.
동축 케이블
The two digital Coaxial inputs allow digital sources to be connected to the MX124 using digital audio RCA coaxial cables. The COAX inputs can handle high-resolution digital audio up to 192 kHz / 24-bit.
The MX124 DAC will process standard format SPDIF PCM signals, Dolby Digital, and DTS bitstreams. Unsupported formats can result in strange and/or unpleasant sounds.

설치

The MX124 may be placed upright on its four feet on a flat surface with proper ventilation and stability. When custom-installed in a cabinet or piece of furniture, the feet and mounting screws may be removed, and retained for future use or service. Ensure an appropriately sized Phillips drill bit is used to avoid damaging the screw heads.
Do not install the MX124 directly above a heat generating component, and always provide adequate ventilation. Cool operation ensures the longest possible operating life for any electronic instrument. If all the components are installed in a single cabinet, a quiet-running ventilation fan can help maintain all system components.
To allow proper airflow to the MX124, ensure there are at least at least 6 inches (15.2 cm) above the top, 2 inches (5.1 cm) below the bottom, 2 inches (5.1 cm) depth behind the rear panel, and 2 inches (5.1 cm) on each side of the amp.
Allow 1 7/16 inch (3.7 cm) in front of the mounting panel for knob clearance if the handles of the amplifier are removed.

스피커 설치

위치	설명 fl
플로리다 프랑스 (Front speaker Left/Right)	From Left and Right speakers should be an equal distance from the main listening position. The distance between each speaker and the TV should also be the same.
C(중앙)	The Center speaker should be between the Front speakers and above or below the TV.
SUSR (Surround speaker Left/Right)	The Surround Left and Right speakers should be an equal distance from the left and right sides of the main listening position. If there are no Surround Back speakers, move the surround speakers slightly behind the main listening position.
FWL/FWR (Front Wide speaker Left/Right)	The Front Wide Left and Right speakers should be outside of the front Left and Right speakers so that there is an equal distance between all Front speakers.
SBUSBR (Surround Back speaker Left/Right)	Place the Surround Back Left and Right speakers an equal distance from the main listening position and directly behind the main listening position. When using a single Surround Back speaker (SB), place it directly behind the listening position.
SW 1/2/3/4 (Subwoofer)	Place the Subwoofer at a convenient location near the Front speakers. If there are multiple Subwoofers, place pairs of subwoofers spaced symmetrically across the front or rear walls, or a single Sub midway between the front or rear pairs. Set a specific layout when using multiple subwoofers in the Speaker Layout menu.
FDL/FDR (Front Dolby speaker Left/Right)	Place the Front Dolby Atmos Enabled speaker on the Front speaker. For a Dolby Atmos Enabled integrated with a Front speaker, place the Dolby Atmos Enabled speaker instead of the Front speaker.
SDL/SDR (Surround Dolby speaker Left/Right)	Place the Surround Dolby Atmos Enabled speaker on the Surround speaker. For a Dolby Atmos Enabled speaker integrated with a Surround speaker, place the Dolby Atmos Enabled speaker instead of the Surround speaker.

위치	설명
RIR BDR (Back Dolby speaker LefURight)	Place the Back Dolby At nos Enabled speaker on the Surround Back speaker. For a Dolby Atmos Enabled speaker integrated with a Surround Back speaker. place the Dolby Atmos Enabled speaker instead of the Surround Back speaker.
FHL/FHR (Front Height speaker Left/Right)	Front Height Left and Right speakers are mounted directly above the Front speakers. Mount them as close to the ceiling as possible and aim them towards the main listening position.
TFUTFR (Top Front speaker Left/Right)	Mount the Top Front Left and Right speakers on the ceiling slightly in front of the main listening position and align with the Left and Right Front speakers.
TMUTMR (Top Middle speaker Left/Right)	상단 중앙 좌측 및 우측 스피커를 주 청취 위치 바로 위에 장착하고 좌측 및 우측 전면 스피커와 정렬합니다.
TRL/TRR (Top Rear speaker Left/Right)	Mount the Top Rear Left and Right speakers on the ceiling slightly behind the main listening position and align with the Left and Right Front speakers.
RHLAHR (Rear Height speaker Left/Right)	Place the Rear Height Left and Right speakers directly behind the main listening position. Mount them as close to the ceiling as possible and align with the Left and Right Front speakers.
SHUSHR (Surround Height speaker Left/Right)	Place the Surround Height Left and Right speaker directly above the surround speakers.
CH (Center Height speaker)	Place the Center Height speaker directly above the center speaker. Mount them as close to the ceiling as possible and aim them towards the main listening position.
TS (Top Surround speaker)	Place the Top Surround speaker directly above the main listening position. and aligned with the Center Channel speaker.

전면 패널

1. INPUT knob scrolls through enabled inputs.
2. Signal format indicators display the signal being input, with DOLBY, DTS, AUDYSSEY, DIRAC, ANALOG SIGNAL, DIGITAL SIGNAL, HDMI SIGNAL, and MULTIZONE as options.
3. Information display indicates the sources, volume, operational functions, and Setup menu settings.
4. VOLUME knob allows adjustment of the listening level.
5. IR sensor receives commands from a remote control.
6. POWER button and LED indicator switches the MX124 on or off, and indicates when the MX124 is in Standby.
7. SLEEP sets a sleep timer in ten minute increments, the maximum timer being two hours.
8. DIMMER cycles through the four brightness levels of the VFD.
9. Zone ON/OFF turns their respective zones ON and OFF.
10. ZONE Select allows the volume, and input of Zones 1 and 2 to be altered.
11. INPUT/OUTPUT FORMAT indicates which speaker channels are in use.
12. Sound Mode buttons allow quick access to the Movie, Music, and Game surround sound modes.
13. STATUS will step through the type of incoming audio signal, the selected input (along with type of A/V connection), and audio processing mode.
14. SETUP will bring up the Setup menu on an attached TV, and on the information display.
15. RETURN goes back to the previous Setup menu.
16. Directional buttons navigate through the Setup menu. The ENTER button selects the chosen values, and moves further into the menus.

후면 패널

1. BLUETOOTH/WI-FI Antennas must be connected to receive Wi-Fi and Bluetooth signals.
2. USB input for connecting USB memory storage devices.
3. DIGITAL AUDIO Inputs use coaxial or optical connections for digital signals, such as CBL/SAT, MP, TV, and CD.
4. RS232 connector communicates with external control devices.
5. NETWORK connector for a wired internet connection via Ethernet.
6. IR Input connects to an IR receiver.
7. 8K HDMI Inputs allow 8K video from seven different sources, including CBL/SAT, MEDIA PLAYER, BLU-RAY, GAME 1, GAME 2, AUX 1, and AUX 2.
8. HDMI Outputs connect to an ARC/eARC TV.
9. VIDEO INPUTs accept composite, and component video inputs.
10. AC input connects the MX124 power cord to a live AC outlet. Refer to the rear panel for voltag요구사항
11. ANALOG AUDIO Outputs can be fed analog signals using a pair of RCA cables for each zone.
12. UNBALANCED OUTPUTS use a RCA connector cable for an unbalanced output signal.
13. BALANCED OUTPUTS each use an XLR connector cable for a balanced output signal.
14. XLR BALANCED INPUTs accept high-level program source signals.
15. ANALOG AUDIO Input connect analog components to the MX124.
16. DATA OUT retransmits remote control signals to source components.
17. Power Control TRIGgers 1 & 2 send On/Off signals to other McIntosh components.
18. SETUP MIC connects a microphone to the MX124.
19. Ground Connection to use with a turntable to prevent noise.

원격 제어 작동

메모: The included McIntosh HR095 remote control has buttons used to control multiple devices. While operating the MX124 with the remote, nothing will happen when pressing buttons that activate features not present on the MX124.

1. Power turns the power on and off.
2. Inputs selects from 15 available audio inputs.
3. VOLUME adjusts the volume level.
4. Backlight turns on the backlight of the unit.
5. OPTION activates an on-screen menu for audio/visual features.
6. Navigation scroll through the menus using the arrows and press ENTER to select.
7. Setup displays the Setup Menu.
8. ►►│ skips to the next track, and can be used to skip and search in internet radio.
9. SLEEP sets a sleep timer for up to 120 minutes in 10 minute increments.
10. QUICK SELECT recalls previously programmed presets such as Input, Volume Level, and Sound Mode for the currently selected Zone.
11. SOUND MODE offers various sound choices in Movie, Music, Game, or Pure categories.
12. Play/Pause pressing this button will halt playback of active media, and it will resume from where it left off when the button is pressed again.
13. HDMI OUT selects the HDMI output.
14. │◄◄ skips to the previous track, and can be used to skip and search in internet radio.
15. BACK returns to previous setup menu.
16. INFO shows on-screen information for the currently selected Input when in the Main Zone.
17. Mute silences the audio output.
18. CH /PAGE switches the browser list pages for online music and USB.
19. ZONE SELECT indicates and changes the current Zone.

원격 잠금 장치

To disable the sensor for the remote control, press and hold RETURN, ENTER, and the power button on the front of the unit while the MX124 is in Standby. Use the Up/Down buttons on the front panel to select RC LOCK On, and press ENTER to lock in the setting. This disables the infrared receiving light function, no longer allowing the remote to control the MX124. To turn the function of the remote control back on, repeat these steps, and select RC LOCK *Off.

패널 잠금

To disable the operation from the front panel, press and hold RETURN, ENTER, and the power button on the front of the unit while the MX124 is in Standby. Use the Up/Down buttons on the front panel to select FP/VOL LOCK On, and press ENTER to lock in the setting. This disables all front panel controls on the MX124. Lock all front panel functions except volume by selecting FP LOCK On. To turn the function of the front panel back on, repeat these steps, and select FP LOCK *Off.

옵션

The remote control’s OPTION button can be used in the MAIN Zone to adjust settings for the selected Input. The adjustments include Dialog Enhancer, Channel Level Adjust, Tone, Picture Mode, and All Zone Stereo. All settings in the Options menu are stored for each source.
Dialog Enhancer adjusts the center channel frequency band to enhance the dialogue in the movies, and vocals in music. By default, Dialog Enhancer is Off, but can be changed to Low, Medium, or High.
Channel Level Adjust allows each channel to be adjusted from -12 dB to +12 dB while listening to music.
Tone allows the user to select whether or not the tone circuit is engaged. When turned Off, the tone controls are bypassed and the audio signal is unaltered.
Audio Delay automatically adjusts the audio processing time to compensate for delays in audio/ video timing. By default, Audio Delay is On, but can be turned Off so the delay can be set manually from 0 ms to 500 ms.
All Zone Stereo allows music to be played from the MAIN ZONE into ZONE2 and ZONE3.

사운드 모드

There are three buttons on the front panel that give quick access to multiple sound/surround modes, MOVIE, MUSIC, and GAME. These modes can also be accessed on the remote control with the added choice of PURE.
The options provided in these modes include Stereo, Dolby Audio – Dolby Digital, DTS Neural: X, and Multi Ch Stereo. When using Dirac Bass Management, Dirac Bass Control in Multi Ch Stereo mode, Distances, Levels, and Crossovers can be applied as filter options. Acoustic filters are not available.
The PURE button on the remote offers multiple options. Direct plays back audio as recorded in the source. Pure Direct plays back an even higher quality sound. When using Dirac Room Correction, Bass Management, Dirac Bass Control in Direct and Pure Direct mode, Distances, Levels, and Crossovers can be applied as filter options.
Acoustic filters are not available. In order to further improve sound quality, the front panel display will be disabled, and the analog video Input/Output switcher, and processor is disabled.
Auto detects the type of digital signal input, and the Playback Mode switches automatically to the corresponding mode. If the signal is analog or PCM (2-channel), stereo playback is used.
For Dolby Digital or DTS, the music is played back according to the channel number.
When using a 2-channel signal, DTS Virtual: X is available, but does not work with Dolby Digital.
The display screen will leave the Sound Mode screen after 5 seconds.
Additionally, the MX124 is equipped with DTS:X Pro decoder technology, bringing the home theater experience to new heights with immersive, object based technology.
Enjoy up to 13.1 channels of audio processing with this automatic feature.

기본 동작

Powering On / Turning Off
The red LED above the POWER button indicates the MX124 is in Standby mode. To switch on the MX124, press the POWER button on the front panel, or press the 리모컨의 버튼을 누르세요.
Upon turning on the unit, there will be a brief warm-up period before the unit is ready to use.
The MX124 has the ability to automatically switch power on or off to source components via the power control connections.
The data port connection allows the operation of basic functions using the remote control. With an external sensor connected to the MX124, remote control operation of the system is possible from another room and/or when the MX124 is located in a cabinet with the doors closed.
입력 선택
Rotate the INPUT knob on the front panel, or use the input buttons on the remote control to select the desired input.
볼륨 조절
Rotate the front panel VOLUME knob, or use the VOLUME buttons on the remote control to set the desired listening level.
Playing Back PC and NAS Files
To play music stored on the local network, select the Online Music input and scroll to Music Servers. After pressing Music Servers, choose the name of the networked PC or Network Attached Storage server. Once done, select something to play.
블루투스
Pair a Bluetooth device to enjoy music on the MX124. Connect the supplied external antennas to the connectors on the rear panel, and power on the unit.
When using Bluetooth for the first time, the unit will indicate on the display that it is in Pairing Mode after pressing Bluetooth on the remote control. In the settings of a Bluetooth device, select the name of the unit in the list of devices displayed on the screen. After the initial connection, the unit will automatically connect to the device first connected to the MX124 when the Bluetooth input is selected.
To pair to a second device, press and hold the Bluetooth button on the remote, or select Pairing Mode in the Options menu. The MX124 can be connected with up to 8 Bluetooth devices. The MX124 allows headphone connection via Bluetooth while playing through the MAIN ZONE. Ensure the Bluetooth Transmitter is On in the General Settings menu. Enter pairing mode on the headphones being used and select them in Device List in the Bluetooth Transmitter submenu of the MX124. Once connected, decide
to listen with Bluetooth+ Speakers, or the Bluetooth Only in Output Mode.
To disconnect Bluetooth headphones from the MX124, turn off the headphones, or go to Bluetooth Transmitter in the Options menu and select Disconnect.
Alternatively, turn Transmitter Off under Bluetooth Transmitter settings in the General Setup settings menu.

네트워크 연결

이더넷
For a wired connection to a network, use an Ethernet cable to connect the MX124 to the router.
Note that plugging in an Ethernet cable will disable the Wi-Fi radio of the MX124.
The MX124 will use the Ethernet connection for all network activity. To enable Wi-Fi, the Ethernet cable must be removed.
With an Ethernet connection, the MX124 browser interface can be used to enter Wi-Fi settings.
Check the IP Address of the MX124 in the Information submenu of the Network Settings menu, and type the address into a browser on a PC or mobile device.
To connect the MX124 to a Wi-Fi network using an existing Ethernet connection, begin by opening ensuring Wired (Ethernet) is selected in the Connection submenu of the Network Settings menu.
스캔 네트워크
To wirelessly connect to a network on the MX124, enter the Connection submenu in Network Settings.
Connect by selecting Wireless (Wi-Fi), and going to Wi-Fi Setup. Pressing Scan Networks will open the local network selection menu. Select the desired network and enter the password to connect the MX124.
Using an iOS Device
AirPlay is an Apple technology designed to control home audio systems and speakers in any room with a tap, or by asking Siri.
To set up the MX124 as an AirPlay device, a device with iOS 10.0.2 or later is required. To play with AirPlay 2, iOS 11.4 or later is required.
AirPlay will connect the MX124 to a local Wi-Fi network automatically.
Make sure the iOS device is on the Wi-Fi network the MX124 is connected to, and the MX124 is powered on. Open Settings on the iOS device and select the Wi-Fi submenu. Look at the Wi-Fi network list and find “Set Up New AirPlay Speaker.” Select the MX124, and it will be added to the network. Alternatively, use the iOS Home app to join the MX124 to the network.
WPS Router
To connect to a WPS Router enter the Connection submenu in Network Settings. Connect by selecting Wireless (Wi-Fi), and going to Wi-Fi Setup. Pressing WPS Router will open a screen with instructions to press the WPS button on the local router. Within two minutes, select the Connect button.
수동
To connect to a network manually, enter the Connection submenu in Network Settings. Connect by selecting Wireless (Wi-Fi), and going to Wi-Fi Setup. Pressing Manual will open a menu where the SSID and Password can be entered to connect to the network.
룬
The MX124 is Roon Ready when connected to a network, and will be available as a Zone for a Roon server. The MX124 can be connected to Wi-Fi using any of the methods previously listed. It can also be directly connected with an Ethernet cable.
코부즈 커넥트
Qobuz is a high quality music platform. Pioneer of high quality sound since 2007, the French platform offers an intimate and enriching experience. Qobuz gives access to an unparalleled wealth of content: more than 100 million tracks available in the best sound quality (Hi-Res and lossless/CD), and exclusive editorial content written by a team of experts.
Use a phone, tablet, or computer as a remote control for Qobuz. Go to https://www.qobuz.com/us-en/magazine/story/2025/05/14/qobuz-connecthow-it-works/ 방법을 배우려면.
스포티파이 커넥트
Spotify Connect allows the MX124 to connect to a phone, tablet, or computer. Connect the MX124 to a network, then while playing music on Spotify, select the MX124 to listen on in the bottom left corner of the screen.
Use a phone, tablet, or computer as a remote control for Spotify. Go to https://www.spotify.com/connect 방법을 배우려면.
타이달 커넥트
To listen to music on Tidal through the MX124, using the Tidal app, select content to play and then select the connect icon on the Now Playing screen. This will bring up a list of nearby devices to stream through. Locate the MX124, and select to pair.
Once paired, use the Tidal app as a remote. Tidal is compatible with select smart assistants that enable voice controls. Depending on the region, voice controls may enabled by linking a Tidal account with the selected smart device. This option can normally be found in the Settings section of the respective Smart Devices app.
에어플레이
AirPlay is an Apple technology designed to control home audio systems and speakers in any room with a tap when the device is on a network. To control this AirPlay enabled device, follow the Using an iOS Device instructions on the previous page.
HDMI ARC/eARC
The HDMI ARC (Audio Return Channel) allows the entire audio system to play the sound from a T V. Ensure the MX124 is connected to the TV’s HDMI input that is labeled “ARC.” The TV’s Setup menu, and settings may need to be adjusted before sound is heard. When the MX124 is set to the HDMI input, the unit will automatically turn On and Off with the TV. Multi-channel formats will be down mixed to a 2-channel output.
Audio formats supported by HDMI ARC include, PCM (2 channel), Dolby Digital (up to 5.1 channel), DTS Digital Surround (up to 5.1 channel).
eARC is the enhanced version of ARC, supporting uncompressed, high-quality audio formats such as Dolby Atmos, IMAX Enhanced, and DTS:X.
Web 제어
The MX124 may be configured via a web browser if correctly connected to a network. In the web browser, the Setup Menu, power, and Main Zone input source switching may be controlled.
Begin by setting the Network Control setting to Always On, and check the IP address of the unit in the Information section of the Network menu. On a PC or tablet, enter the IP address of the MX124 in a browser’s address box.

설정 메뉴

메뉴	하위 메뉴
오디오	Subwoofer Level Adjust, Bass Sync, Surround Parameter, DFR, Volume, Audyssey, Dirac Live, Graphic EQ, DAC Filter
동영상	HDMI Setup, Output Settings, On-Screen Display, Screen Saver, 4K/8K Signal Format, HDCP Setup
입력	Input Assign, Source Rename, Hide Sources, Source Level
스피커	Audyssey Setup, Manual Setup
회로망	Information, Connection, Settings, Network Control, Friendly Name, Diagnostics, AirPlay, Spotify Connect, Roon Ready, TIDAL Connect, Qobuz Connect, Wi-Fi and Bluetooth
일반적인	Language, Bluetooth Transmitter, ZONE 2 and 3 Setup, Zone Rename, Quick Select, Trigger Out 1-2, Auto Standby, Front Display, Firmware, Information, Save & Load, Setup Lock, Reset

설정 메뉴를 탐색하는 방법
The McIntosh MX124 has been factory configured so default operating settings allow immediate enjoyment of superb audio, and video without the need for further adjustments. If the settings must be changed from the factory default settings, a Setup menu is provided to customize the operating settings using the TV connected to the unit. Enter the Setup menu by pressing the SETUP button on the front panel of remote control. To scroll through the menus, use the arrow keys in the center of the remote.

Audio Setup Submenu

설정	옵션
서브우퍼 레벨 조정	-12.0 dB – 0.0 dB – +12.0 dB
베이스 동기화	0ms – 16ms
서라운드 매개변수
Dfr	높음, 중간, 낮음, 꺼짐
용량
오디세이
디랙 라이브
그래픽 EQ
DAC 필터	Filter 1, Filter 2

메모: Options in bold are the default settings.
서브우퍼 레벨 조정
Subwoofer Level Adjust changes the subwoofer volume level for all input sources, with a range of -12 dB to +12 dB.
베이스 동기화
Bass Sync corrects the delay of low frequency effects for multi-channel content, such as Blu-ray discs with a correction range of 0 to 16 ms.
사운드 매개변수
Surround Parameter allows the surround audio-sound field effects to be adjusted for each sound mode. Certain settings must be set during playback.
시네마 EQ softens the upper treble range of movie sound tracks to improve clarity. By default, this feature is turned Off. Cinema EQ cannot be set when the sound mode is set to Direct, Pure Direct, Stereo, or Multi Ch Stereo.
Loudness Management uses settings made in Dynamic Compression, and compresses the dynamic range of audio based on user preference. By default, Loudness Management is On.
Dynamic Compression sets the sound compression level, changing the difference between loud and soft sounds. By default, this feature is Off, but can be set to Automatic, Low, Medium, or High. Dynamic Compression can be set when the input is Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, or DTS.
Dialogue Control adjusts the volume of dialogue in videos, and vocals in music, with a range of 0 to 6.
Low Frequency Effects adjusts the level of low frequency effects and ranges from -10 dB to 0 dB.
The recommended settings for Dolby Digital and DTS movie sources is 0 dB, and -10 dB for DTS music sources.
스피커 가상화기 enhances speaker channels to create a surround sound effect. By default, this feature is On.
센터 스프레드 expands the center channel signal to create a sound stage effect for the listener, primarily used for music. By default, this feature is Off, and may only be adjusted when the sound mode is set to Dolby Surround.
DTS Neural X optimizes non-object based audio signals for a specific speaker configuration. By default, this feature is On, and may only be adjusted when the sound mode is set to DTS:X.
아이맥스 sets the audio mode for IMAX playback. By default, this feature is set on Auto, and automatically enables IMAX mode when IMAX content is detected.
IMAX Audio Settings can be configured so a system will mimic an IMAX theater. By default, this feature is set on Auto and automatically optimizes speaker settings. This setting may only be adjusted when the sound mode is set to IMAX DTS or IMAX DTS:X.
High Pass Filter sets the cutoff frequency for all speakers during IMAX playback when IMAX audio settings are set to Manual, with a range of 40 Hz to 250 Hz and a default of 80 Hz.
저역통과필터 sets the cutoff frequency of low frequency effects during IMAX playback. IMAX audio settings must be set to Manual to change this setting, which offers a range of 70 to 250 Hz.
서브우퍼 출력 sets the bass signal for the subwoofer during IMAX playback when IMAX audio settings are set to Manual. By default, only the Low Frequency Effect signals are played.
스피커 선택 selects which speakers output sound in the current sound mode. By default, this feature uses Floor and Height speakers. This setting may only be used adjusted when the sound mode is set to Multi Ch Stereo.
서브우퍼 turns the subwoofer outputs On and Off. By default, the subwoofers are used. This setting may be adjusted when the sound mode is Direct or Stereo, and when LFE + Main is set in Subwoofer Output.
기본값 설정 returns all Surround Parameter settings to default.
Dfr
Dynamic Frequency Restorer takes the sound of compressed audio and restores its quality to near-pre-compression. By default, DFR is Off, but can be changed to High, Medium, or Low. High is optimized for sources with very weak highs (64 kbps and under), Medium applies a suitable bass and treble boost (96 kbps and under), and Low is optimized for sources with normal highs (96 kbps and over). This setting may not be adjusted when the sound mode is set to Direct or Pure Direct.
용량
Volume controls the MAIN ZONE volume settings.
규모 sets whether the volume is displayed in typical 0-98 format, or in decibels.
제한 세트 the maximum volume with a range of 40 to 80. By default, there is no maximum volume.
전원 켜기 수준 sets the volume level when the MX124 is on. By default, the unit will maintain the volume level it was last set at.
음소거 수준 sets the amount of attenuation when mute is on. By default, Full mute is set, but this may be changed so the mute level is -40 dB, or -20 dB lower than the current volume.
Audyssey®
Sets Audyssey settings after initial Audyssey setup has been performed.
멀티EQ XT32 compensates for time, and frequency in relation to the measured listening area. MultEQ XT32 is set to the recommended Reference setting, but may be changed to L/R Bypass, which omits the left and right front speakers, Flat, which is optimized for small rooms, and the setting may be turned off altogether.
다이나믹 EQ decreases volume to prevent deteriorating sound quality. By default, Dynamic EQ is On, and Tone cannot be adjusted.
Reference Level Offset provides four presets for media of varying mix levels. 0 dB is the default and is optimized for movies, 5 dB is for content with a very wide dynamic range such as classical music, 10 dB is for content with a wide dynamic range like jazz, and 15 dB is for content mixed at very high listening levels like pop or rock music. This setting is available when Dynamic EQ is On.
Surround Level Compensation amplifies the volume of the surround, and rear channels in accordance with the Dynamic EQ to maintain the surround sound effect. By default, it is set to Heavy, which increases the volume by 8.5 based on the master volume. Medium increases the volume by 5.6 dB, Light by 2.8 dB, and Off makes no increase to the surround and rear channels.
동적 볼륨 adjusts the volume between content types automatically. By default, Dynamic Volume is Off, but it may be changed to adjust loudest and softest sounds for Heavy, Medium, and Light adjustment. Dynamic Volume may not be adjusted when MultEQ XT32 is Off.
오디세이 LFC prevents bass, and vibration from being carried to other rooms by adjusting the low frequency band. By default, Audyssey LFC is Off. Audyssey LFC may not be adjusted when MultEQ XT32 is Off.
Containment Amount adjusts low frequency containment, 1 containing the least and 7 containing the most amount of sounds. Containment amount may be adjusted when Audyssey LFC is On.
디랙 라이브
Dirac Live sets a filter after running Dirac Live Room Correction. See pages 23 and 24 for Dirac Live information.
그래픽 EQ
Graphic EQ adjusts the tone of each speaker. The Direct and Pure Direct sounds modes must be Off to adjust this setting, as well as MultEQ XT32.
그래픽 EQ sets whether or not graphic equalizer is used. By default, graphic equalizer is not used.
Speaker Selection selects which speakers to adjust the tones of. By default, the Left and Right speakers tones are adjusted together, but this may be adjusted so all speakers tones are connected, or so Each has to be individually tuned.
EQ 조정 adjusts the tonal balance of each frequency band per speaker.
Curve Copy copies the correction curve created in Audyssey setup.
기본값 설정 return all Graphic EQ settings to default.
DAC 필터
DAC Filter allows for the selection of multiple filters. By default, Filter 1 is enabled to output the McIntosh sound, but Filter 2 may be selected to use bench test measurements.

Video Setup Submenu

설정	옵션
HDMI 설정
출력 설정
온 스크린 디스플레이
스크린세이버	켜기, 끄기
4K/8K 신호 형식	Standard, Enhanced, 8k Enhanced
HDCP 설정	자동, 1.4, 2.3

HDMI 설정
The HDMI setup menu allows the configuration of HDMI settings related to video processing and audio.
HDMI 오디오 아웃 selects which speakers audio is being sent to. By default, audio is output through the speakers connected to a power amp, but can be switched to play through TV speakers with the TV setting.
HDMI Pass Through selects whether or not HDMI signals will be transmitted to the HDMI output when the unit is in Standby Power Mode. By default, this feature is On (Off in Europe).
Pass Through Source selects which HDMI input signals pass through in Standby. By default, CBL/ SAT is the Standby source (Last in Europe), but this can be changed to any other input, or the Last setting which selects the last used HDMI input to pass through. Pass Through Source may be adjusted when HDMI Control or HDMI Pass Through is on.
RC Source Select sets whether or not the unit can be turned on by the input source select on the remote control when the unit is on Standby. By default, the power turns on and the input changes, but this can be changed with the Source Select Only setting.
HDMI 제어 connects the volume, and power of the unit and TV. If turned off, the TV remote cannot control the functions of the TV and unit in tandem. Certain HDMI settings may only be adjusted when HDMI Control is On.
호 decides whether the unit will receive sound from the HDMI OUT TV 1 connector, even if HDMI Control is off. By default, this feature is Off.
TV 오디오 전환 changes to the TV Audio input when a TV connected via HDMI sends a command. By default, this feature is On.
전원 끄기 제어 links the power of the MX124 to external devices. By default, this feature is set to All, which puts the MX124 in Standby when a connected TV is turned off, independently of the input source. If switched to the Video setting, the unit will go into Standby when the TV is turned Off. Power Off Control can be turned Off so the power of the TV and unit are not connected.
전력 절약 reduces energy costs, and can activate Power Control when TV Audio is selected as the input source, or when playing content from a device connected by HDMI. By default, this feature is turned Off.
출력 설정
The Output Settings menu allows the configuration of video output settings
HDMI 비디오 출력 selects the HDMI monitor connector being used. By default, this feature is set to Auto (Dual) in which the output being used is detected automatically. This can be changed so only TV 1 or TV 2 is being used.
비디오 모드 configures the video processing method to match the video being played. By default, this feature is set to Auto, which allows the unit to automatically process the video based on the HDMI content information. The user can set this setting to Game or Movie, which will make the unit perform processing suitable for either type of media. The Bypass setting will remove all video processing from the HDMI video path. Video Mode cannot be set when the sound mode is set to IMAX or IMAX DTS:X.
HDMI 업스케일러 upscales 1080p and 4k HDMI video to 8k based on the TV’s capabilities. By default, this feature is Off.
온 스크린 디스플레이
Volume sets the location of the volume level. By default, the volume is displayed at the Bottom of the screen, but can be moved to the Top, or turned off so it is not displayed.
정보 displays operation status when an input source is switched. By default, this is turned On.
지금 재생 중 sets the playback display time when the input source is Online Music, or Bluetooth. By default, this is Always On, but can be switched to Auto Off which only shows the display for 30 seconds after operation.
21:9 모드 shifts the position of the volume, options, and information menus into a viewable area when using a 21:9 ratio display. By default, 21:9 Mode is Off.
스크린세이버
Screensaver activates if there is no operation detected for five minutes when Screensaver is turned On.
4K/8K 신호 형식 
4K/8K Signal Format sets the signal format options for devices connected to each input. By default, this feature is set to Enhanced for a TV, source device, and cables that can support high quality 4k 60 Hz 4:4:4 8 bit, 4:2:2:2, or 4:2:0 10 bit video signals. 8k Enhanced can be selected if a setup can support high quality 8k 60 Hz or 4k 120 Hz video signals. Set to standard for a setup that can support 4k 60 Hz 4:2:0 8 bit video signals.
HDCP 설정
HDCP Setup sets the HDCP version for each input source. This feature is automatically set to Auto, which automatically applies the HDCP version according to the TV. This setting can be changes so it is set to 1.4 or 2.3.

Inputs Setup Submenu

설정	옵션
입력 할당
소스 이름 바꾸기	CBL/SAT, Media Player, Blu-ray, Game1, Game2, AUX1, AUX2, TV Audio. CD, Phono, Tuner
소스 숨기기	Show, Hide
소스 레벨

입력 할당
Input assign adjusts settings related to input source playback.
HDMI assigns HDMI input connectors to inputs 1-7 when needed.
디지털 assigns digital audio input connectors to COAX1, COAX2, OPT1, or OPT 2 when needed.
비슷한 물건 assigns Analog input connectors to inputs 1-6, or XLR when needed.
동영상 assigns video input connectors and composite video input connectors to inputs COMP, VIDEO1, or VIDEO2 when needed.
입력 모드 sets the audio input modes for each input. The default setting, Auto, is recommended for Input Mode, but can be changed to HDMI, Digital, or Analog so it plays signals from only the selected input.
기본값 설정 sets Input Assign back to the default settings.
소스 이름 바꾸기
Source Rename changes the display name of the selected input source. If the device name can be acquired from an HDMI device connected to the unit, the display name will change automatically. Default names can be returned by selecting the Set Defaults setting.
소스 숨기기
Hide Sources hides the input sources not being used. By default, all sources are shown on the display.
소스 레벨
Source Level corrects the playback level of a selected source’s audio input.
소스 레벨 can be adjusted between -12 dB and +12 dB when using Online Music.
Analog Inputs/Digital Inputs set the source level of analog or digital inputs.

Speaker Setup Submenu

설정	옵션
Audyssey Setup	Speaker Layout, Check Results, Restore…, Start
수동 설정	Speaker Layout, Distances, Levels, Crossovers, Speaker Preset, Advanced

Audyssey Setup
Audyssey is an intelligent system which automatically calibrates a setup to properly interact with a room’s acoustics.
To perform measurements, place the sound calibration microphone in multiple locations around the listening area, always within 2ft (60 cm) of the main listening position.
The main listening position is where one would typically sit alone in the listening environment.
Ensure the room is as silent as possible, there are no cellphones, and no obstacles stand between the speakers and microphone.
Measuring in six or more positions is recommended for the best results. Audyssey MultEQ XT32 use the measurements from the main listening position to calculate speaker distance, level, polarity, and the optimum crossover value for the subwoofer. Audyssey Sub EQ HT TM corrects audio based on the volume and distance of subwoofers and utilized the Audyssey MultEQ XT32 signal to reproduce powerful low frequency sounds. To run Audyssey Sub EQ HT, set Measure (2 spkrs), Measure (3 spkrs), or Measure (4 spkrs), and set Subwoofer Mode to Standard in Speaker Layout.
준비: Before installing the Audyssey microphone in the main listening position, attach it to the supplied stand. Ensure the tip of the microphone is pointed toward the ceiling and the height of the stand matches the ear level of a seated listener.

When using a subwoofer with a direct mode, turn direct mode On, and disable both the Volume Adjustment, and Crossover Frequency settings.
When using a subwoofer without direct mode set the volume in the 10 o’clock position, set the crossover frequency to its maximum, turn Low Pass Filter Off, and disable Standby mode.
Connect the sound calibration microphone to the SETUP MIC jack on the rear panel of the MX124.

• Speaker Layout sets the systems speakers to suit the environment.
• Channel Select measures the front speakers if Amp Assign is set to 11.1ch + Front B.
• Dolby Speaker Setup sets the distance between the Dolby Atmos Enabled speaker and the ceiling speakers, which can be set when any Dolby Atmos speaker setting is enabled.

Select Start and follow the instructions on the screen, pressing Next to proceed.

측정: Select Begin Test to start measurements, noting that measurement requires several minutes. If ERROR or CAUTION is displayed on the screen, go to Error Messages to check related items, performing any necessary procedures. If the volume level of the subwoofer is inadequate, an error message will appear. See page 20 for error messages.
When the detected speaker is displayed, select Next and move the sound calibration microphone to position 2. Repeat this step with each consecutive position, in up to eight positions.

Calculation and Storage: Once measurements are complete, Audyssey will analyze the results for several minutes. Ensure the power remains on when analysis is taking place. Turning on Dynamic EQ is an option once analysis has taken place to correct the frequency response so media may be heard at a low volume. The output volume is monitored and altered to remain steady and audible in a room.
설정 마무리: Once analysis and storage has ended, unplug to sound calibration microphone from the SETUP MIC jack on the main unit and press Next. Measurement data is automatically stored to Speaker Preset 1 in the Speaker Preset menu. To verify measurement results, select Details. Do not enable new speakers in the speaker layout after Audyssey setup, if the layout has changed, rerun Audyssey setup. Note that subwoofers may measure a greater distance than they are due to common electrical delay.
오류 메시지: During Audyssey setup an error message may pop up, if this occurs, reference the table below.

No Speakers Found	The sound calibration microphone is not detected, or not all speakers could be detected	Connect the included sound calibration micro-phone to the SETUP MIC jack, or check the speaker connections
Ambient Noise is is too High or Level is too Low	Excess noise in the mom ' or the speaker/subwoofer round is too low s	Ensure quiet surroundings, check the speaker installation, or adjust the subwoofer volume
Front R : None	The displayed speaker could not be detected	Check the connections of the displayed speaker
Front R : Phase	The display speaker is connected with the polarity reversed	Check the polarity of the displayed speaker, or if certain of the speaker being properly connected, press Ignore

The ideal level of each subwoofer measurement is 75 dB, and an error message will appear when one level of subwoofers is outside the range of 72 dB – 78 dB.
After selecting SW Level Matching, adjust the volume control on the subwoofer so it measures in the 72 dB – 78 dB range.
수동 설정
스피커 레이아웃
Speaker Layout allows for the selection of a speaker layout suitable to a speaker system
Amp 양수인 configures detailed preamplifier settings manually. By default, MAIN ZONE can play up to 13.1-channels, but you can connect speakers for up to 15.1-channels. This setting can be changed to 11.1 ch (Bi-Amp) to create bi-amp connections with the front speaker, 11.1ch + Front B to connect two front speakers, or Custom to assign the preamplifier of the unit as desired.
Go to Settings to assign a channel to a speaker terminal.
Front/Center/Surround/Surround Back/Front 넓은 selects which speakers exist in a system by turning the Front, Center, Surround, and Front Wide On or Off. Configuration for the Surround Back speakers is separate. By default, two speakers are used, but this can be changed to one speaker, or none.
하이트 스피커 selects the amount of height speakers, ceiling speakers, and Dolby Atmos Enabled speakers used in MAIN ZONE. None may be used, though 2, 4, 5, 6, 7, or 8 speakers used at a time is optional. 5 or more speakers should be selected when Top Surround or Center
하이트 스피커 are being used. 7 or 8 speakers can be selected when Front Wide is not used.
공들여 나열한 것 selects the layout of speakers for a 2, 4,  or 6-channel setup of height, ceiling, or Dolby Atmos Enabled speakers.
서브우퍼 sets the presence of the subwoofers. By default, only one is used, though up to four may be selected.
서브우퍼 모드 sets the audio to be output from the subwoofer when using multiple subwoofers.
By default, this is set to Standard in which all active subwoofers output LFE signals and bass below the crossover frequency of all the speakers.
This setting may be changed to Directional in which the bass output is below the crossover frequency of the speakers placed beside them.
서브우퍼 레이아웃 configures the layout of multiple subwoofers. The options for this setting change depending on the amount of subwoofers being used. Left/Right is the default, meaning the subwoofers are set symmetrically on the front side. When set to 2 spkrs, Front/Rear is an option when placing a subwoofer in the middle of the front side and another in the middle of the rear side of a setup. 3 spkrs has a FL/FR/Rear option for two subwoofers set symmetrically on the front side and one in the middle of the rear side of a setup. 4 spkrs has a FL/FR/RL/RR options for four subwoofers in each corner of the room.
바이Amp determines which connector is used for the Bi-Amp connection of the front speakers.
11.1ch(Bi-Amp) must be set in Amp Assign to adjust the Bi-Amp 환경.
프론트 B determines which connector is used for the connection of the second front speakers.
11.1ch + Front B must be set in Amp Assign to adjust the Front B setting.
설정 selects the signal to be output from the selected PRE OUT connector. Only Center and None can be set for the CENTER PRE OUT connector. If seven or more height/ceiling/Dolby Atmos Enabled speakers are being used, only Top Middle, Surround Dolby, or None can be set for HEIGHT 3 PRE OUT connectors. HEIGHT 4/FRONT WIDE PRE OUT connectors may be used with front wide speakers or if seven or more height / ceiling / Dolby Atmos Enabled speakers are used. HEIGHT 4 / FRONT WIDE PRE OUT connectors may only be set to Front Wide, Top Surround, Center Height, TS/CH, or No. To set Top Surround, Center Height, or TS/CH, Top Middle, Surround Dolby, or Surround height must be set on the HEIGHT 3 PRE OUT connector.
View Terminal Config. shows how to connect PRE OUT connectors for the Amp 설정을 할당합니다.
거리
Distances allows the user to set the measured distance between the listening position to each speaker. When using Dirac Live the unit is fixed as msec.
단위 establishes the unit of measurement for the distance. Units can be changed between Feet and Meters.
단계 sets the minimum variable width of distance. By default, the minimum is 1 ft, but can be changed anywhere between 1 ft and 0.1 ft (0.1 m / 0.01 m, 1 ms / 0.1 ms when using Dirac Live.)
Set the Distance establishes the distance between the listener and the speakers, ranging from 0.0 ft to 59.1 ft (0.00 m – 18.00 m, 0.0 ms – 50.0 ms when using Dirac Live.) By default, Front L / Front R / Front Height L / Front Height R / Center / Front Wide L / Front Wide R / Front Dolby L / Front Dolby R / Subwoofer 1 / Subwoofer 2 / Subwoofer 3 / Subwoofer 4 are set to 11.8 ft (3.60 m). Any other speakers are set to 9.8 ft (3.00 m).
Dolby Speaker Setup sets the distance between the Dolby Atmos Enabled speaker and the ceiling between 3.0 ft – 10.8 ft (0.90 m – 3.30 m).
This setting can be set when Front Dolby, Surround Dolby, or Back Dolby is set in Speaker Layout, but cannot be used when Dirac Live is in use.
세트 기본값 returns all Distance settings to their default state.
레벨
Levels sets the volume of the test tone to be the same at the listening position when it is output from each speaker. Each Level is stored independently in Dirac Live Room Correction.
Test Tone Start adjusts the test tone volume from -12 dB – +12.0 dB. By default the volume is set to 0.0 dB. To adjust the channel levels for each input, set these in the Channel Level Adjust Options menu.
Set Defaults returns all settings in Levels to their default state.
크로스 오버
Crossovers set with the lower limit frequency of the base frequencies that can be played through each speaker. Check the speaker specifications for frequency information.
Set the Crossover Frequency establishes the crossover point for low frequency sounds, with a default frequency is 80 Hz due to its ability to work with a wide range of speakers. Full Range may be selected for the speaker to play the full range of audio, but it is possible to set a crossover point for the subwoofer to take over low tones ranging from 40 Hz to 250 Hz. Higher frequencies are recommended for smaller speakers.
스피커 프리셋 
Speaker Presets may be saved to suit environments in which speakers are being used. The settings saved to each preset are Speaker Layout, Distances, Levels, Crossovers, Subwoofer Output, Low Pass Filter, Distribution, 2ch Playback, Front Speaker settings as well as MultEQ XT32, Dirac Live, and Graphic EQ data.
고급의
Advanced speaker settings include Low Frequency Effects, Front Speaker, 2ch Playback, and Tactile Transducer.
서브우퍼 출력
Subwoofer Output selects which low frequency signals are sent to the subwoofer outputs.
서브우퍼 출력 determines what information the subwoofers recieve. By default, LFE is selected, allowing the subwoofer to receive the Low Frequency Effects track, and any redirected bass from speakers using Crossover. This setting can be changed to
LFE + Main, allowing the subwoofer to receive the LFE track, redirected bass, and a copy of low frequency signals from all full range speakers.
베이스 Extration LPF selects the low-pass filter point for the full-range speaker to copy the low frequency signal to the subwoofer. The default is 80Hz, but can range from 40 Hz to 250 Hz.
저역통과필터
Low Pass Filter sets the crossover point for the LFE channel when changing the playback of the LFE signal to the subwoofer. By default, this setting is set to 120 Hz, but can range from 70 Hz to 250 Hz.
분포
Distribution adjusts the amount of LFE signal sent to the full-range floor speakers.
전면/중앙/서라운드/서라운드 후면/전면 와이드 plays LFE signals through floor speakers. By default, the floor speakers do not play LFE signals, but this can be changed so they play signals ranging from -20 dB to 0 dB.

전면 스피커
Front Speaker sets which front speaker to use for every sound mode. By default, front speaker A is used, but this may be changed so only front speaker B is used, or so A+B speakers are used.
2ch 재생
2ch Playback selects the method for setting the speakers used in the 2-channel direct and stereo playback modes.
환경 selects the method for setting the speakers used in 2-channel setups. By default, this setting is set to Auto so settings in Speakers are applied, but this may be set to Manual so speakers can be set differently for 2-channel playback.
크로스오버 sets the maximum frequency of the bass signal from each channel to the subwoofer. The default Crossover frequency is 80 Hz due to the frequency working with a wide variety of speakers. Full Range may be selected for the speaker to play the full range of audio, but it is possible to set a crossover point for the subwoofer to take over low tones ranging from 40 Hz to 250 Hz. Higher frequencies are recommended for smaller speakers.
서브우퍼 establishes the presence of a subwoofer. By default, a subwoofer is used, but this setting may be set to No when no subwoofer is connected.
서브우퍼 출력 selects the low frequency signals sent to the subwoofer. By default, LFE is selected so when 2ch Playback Crossover is set to Full Range, only LFE signals are output from the subwoofer. This may be changed to LFE + Main so front channel low range signal is added to the LFE signal output from the subwoofer.
Bass Extration LPF selects the low-pass filter point for the full-range speakers to copy the low frequency signal to a subwoofer. By default, this frequency is 80 Hz, but can be changed from 40 Hz to 250 Hz.
LFE Distribution adjusts the amount of LFE signal sent to the full range front speakers. By default, this setting is Off, but may be changed from -20 dB to 0 dB.
Distance FL/Distance FR sets the distance from the main listening position to the speakers. By default, this setting is set at 11.8 ft, but may be changed from a range of 0.0 ft to 59.1 ft (0.00 m – 18.0 m, 0.0 ms – 50.0 ms when using Dirac Live).
Level FL/Level FR sets the level of each channel ranging from -12.0 dB to +12.0 dB, the default being 0.0 dB
촉각 변환기
Tactile Transducer sets the level and low pass filter cutoff frequency when using tactile transducers. For Tactile Transducer connections, use the Subwoofer 4 PRE OUT connector. This cannot be set when Subwoofers are set to 4 spkrs in Speaker Layout.
촉각 변환기 Enables and Disables the tactile transducer, and is Disabled by default
수준 adjusts the volume of the tactile transducer output. By default, the Level is set to 0.0 dB, but may be changed from -12.0 dB to +12.0 dB.
저역통과필터 selects the low pass filter cutoff frequency for the tactile transducer output. By default, this is set to 80 Hz, but may be changed from a range of 40 Hz to 250 Hz.
Dirac Live Setup
The MX124 includes the licensing for Dirac Live Room Correction and Bass Control, the leading digital room correction solution used in home theaters. Room Correction includes state-of-the art algorithms that analyze and digitally reduce room impact, and enhance speaker performance. Dirac Live Bass Control technology manages low-frequency channel routing from the signal to a systems speakers. Systems with multiple subwoofers will see substantially improved performance.
장비
The equipment needed to set up Dirac Live include a computer with the Dirac software installed, and the provided microphone and stand. The Audyssey microphone is not compatible with Dirac Live setup.
Configuring MX124 Settings
Before attempting to configure the speaker setup, ensure that the MX124, and a computer with Dirac Live are connected to the same network. If measurement has taken place before, select the speaker preset to use, keeping in mind that only two can be set at a time. When performing calibration for the first time, measurements will automatically be stored in Speaker Preset 2.
In Speaker Layout, set the layout of speakers being measured.
다시 부탁드립니다view the Dirac Live user manual setup and operation before beginning calibration. Information regarding the user manual and other tips may be found at https://www.dirac.com/live/downloads
측정
After setting up the Dirac Live software on a computer, log into a Dirac account. Select the MX124 in the Dirac menu, rescanning if the unit fails to initially appear on the screen.
Connect the provided Dirac microphone to the USB input on the back of the MX124. A microphone correction file will be sent from the unit to the Dirac app on the PC in use. If the provided Dirac microphone is connected directly to the PC, select No Microphone Calibration in the Direc Live software to load the correction file Download the microphone correction file ~에서 www.mcintoshlabs.com/products/home-theater-processors/MX124.
For proper measurements, adjust the output of all speakers to a suitable level. To begin volume calibration, place the provided stand at the main listening position and attach the microphone, pointing it toward the ceiling. Ensure the microphone is set at the same height as listeners ears in the main listening position.
In the Measurement Levels menu, set the microphone gain to 100% and the Master Output somewhere around -55.0 dB. Select one speaker and press play, adjusting the Master Output so the audio detected from the speaker is between -15.0 dB and -30.0 dB. Repeat for all speakers before selecting Proceed to Select Sweet Spot.
In Select Sweet Spot, set the measurement type based on where the main listening position is in the room and how it will be utilized. Keeping the microphone in the main listening position, select the circle in the center of the illustration on the screen.
Click Measure Selected Position for a tone to play through each speaker. When the measurement is finished, move the microphone to the next position and repeat, selecting a new position each time. When each measurement is finished, click Proceed to Filter Design.
필터 설계
Adjust the filters in Dirac Live Room Correction, Bass Management, or Bass Control. Up to three filters can be created with Dirac.
룸 보정:

1. Filter Options selects Dirac Live if using Room Correction. Filters are calculated after being selected, and may take some time to be displayed.
2. Target Curve decides the frequency characteristics of the speakers in a system, adjusting the target curve.
3. Curtains slides on the screen adjust the frequency range the filter is applied across.
4. Speaker Selection selects the speaker(s) to edit the target curve of.

Bass Management and Bass Control

1. Filter Options selects Bass Management or Bass Control as the filter design. Filters are calculated after being selected, and may take some time to be displayed.
2.  Target Curve decides the frequency characteristics of the speakers in a system, adjusting the target curve.
3. Curtains slides on the screen adjust the frequency range the filter is applied across.
4. Speaker Selection selects the speaker(s) to edit the target curve of.
5. Crossover Points adjusts the crossover frequency of the selected group of speakers.
   A defines which frequencies are assigned to output mostly through subwoofers.
   B allows both subwoofers, and high-range speakers to receive selected frequencies.
   C defines the frequencies assigned to highrange speakers.
6. Calculate calculates the filter to ensure bass accuracy for Bass Control.

Export a filter to the MX124 by selecting the slot of the desired filter. Enter a name for the filter, and press Export.

문제 해결
Dirac Live does not measure crossover frequencies. Target curves may not be adjusted offline. If an error message is shown, ensure the Dirac Live software is up to date.
Ensure that the computer being used for calibration, and the MX124 are connected to the same network. If the computer does not detect the MX124, restart the Dirac Live software or the MX124. If this does not work, Dirac Live may not be compatible with the router being used. Use a different router, or check its settings.
If Dirac Live senses that the speaker configuration is different from that of the stored configuration, Device Data Inconsistent or Unsupported will pop up.
If the current configuration is ideal, reconfigure the Dirac Live measurements.
Certain speaker settings may not be configured when using Dirac Live Bass Control.
A Dirac Live account is necessary to use the room correction software, make an account on the web대지: https://www.dirac.com/brands/mcintosh

Network Setup Submenu
To use the MX124 by connecting it to a home network (LAN), configure the network settings. If setting up the home network via DHCP, set DHCP to on. When assigning an IP address to each device manually, assign an IP address to the MX124 using the IP Address settings, and enter the information of the home network.
정보
Information displays network information, including Friendly Name, Connection, SSID, DHCP, IP Address, MAC Address (Ethernet), MAC Address (Wi-Fi), and Wi-Fi signal strength.
연결
Connection chooses whether to connect the home network to a wireless LAN or a wired LAN. When using a wired LAN, select Wired (Ethernet) after connecting a cable. By default, this setting is set to Wireless (Wi-Fi) and connects to the network wirelessly.
Wi-Fi 설정
Scan Networks displays the local network. Selects the network being used, enter the password, and select OK. Select Rescan if the network cannot be found.
Use iOS Device connects to a network using an iOS device. By connecting a device to the MX124, the unit will automatically connect to the network used by the iOS device. Select Use iOS Device on the TV screen, making sure the iOS device is connected to  the wireless LAN, then press Next.
WPS Router uses a WPS compatible router to connect using the push button method. Select Push Button on the TV screen, switch to WPS mode on the router before pressing Connect on the TV screen.
수동 : Enters the name (SSID) and password  of the ideal network before setting the name of the SSID. When setting the Security, select the encryption method according to the encryption setting of the access point in use. Enter the password, then press Connect once finished entering all of the required information.
설정
Settings configures the IP Address using the available connection settings.
디씨에프(DHCP) configures the network settings automatically to the router. By default, DHCP is On.
IP 주소 sets the IP Address within the available ranges.
CLASS A includes 10.0.0.1 – 10.255.255.254
CLASS B includes 172.16.0.1 – 172.31.255.254
CLASS C includes 192.168.0.1 – 192.168.255.254
서브넷 마스크 is for connecting an xDSL modem, or connector adaptor directly to the MX124, input the subnet mask indicated in the documentation supplied by the users provider. Normally, input 255.255.255.0
기본 게이트웨이 inputs the gateway IP Addrss when connected.
DNS enters the DNS address indicated in the documentation supplied by the users provider.
네트워크 제어
Network Control enables network communication in Standby Power mode. By default, this setting is Always On (Off in Standby in Europe) and the main unit remains operable with a network compatible controller.
친숙한 이름
The Friendly Name is the name of the MX124 displayed on the network. The default name upon first use is McIntosh MX124, but may be changed to Home Theater, Living Room, Family Room, Guest Room, Kitchen, Dining Room, Master Bedroom, Bedroom, Den, Office, or a personalized name of up to 30 characters. Set Defaults may be selected, restoring the default setting for Friendly Name.
진단
Diagnostics checks the network connection.
물리적 연결 checks the physical LAN port connection. If the LAN cable is not connected an Error will be shown, but if the LAN is in tact it will display OK.
라우터 액세스 checks the connection from the MX124 to the router. If the unit fails to communicate with the router an Error will be shown, if communication is in tact OK will be displayed.
인터넷 입장 checks whether the MX124 has access to the internet (WAN). If the MX124 fails to connect to the internet, Error will be displayed. If connection is in tact OK will be displayed.
에어플레이
AirPlay selects settings for Apple AirPlay. To use the AirPlay function, ensure the Apple product being used is connected to the same network as the MX124. Once playing a song on the Apple device, select the AirPlay icon, and subsequently the desired device/speakers.
AirPlay 이름 displays the name of the MX124 on Apple devices.
에어플레이 turns Apple AirPlay On and Off.
스포티파이 커넥트
Toggles access to Spotify Connect. By default, access for Spotify Connect is On.
룬 레디
Toggles access to Roon Ready. By default access for Roon Ready is On.
타이달 커넥트
Toggles access to TIDAL Connect. By default access for TIDAL Connect is On.
코부즈 커넥트
Toggles access to Qobuz Connect. By default access for Qobuz Connect is On.
Wi-Fi 및 블루투스
Enables and Disables the Wi-Fi and Bluetooth radios.
와이파이 Enables and Disables Wi-Fi function  to prevent noise that affects the sound quality. Using a wired LAN to connect the MX124 to the network enables playback with a high sound quality. By default, Wi-Fi is Enabled.
블루투스 Disables Bluetooth functions to reduce negative effects to sound quality. By default, Bluetooth is Enabled.

General Setup Submenu

언어
Language sets the language of the display menu on the TV. Change the language in the General Setup menu from English to Spanish, or French. In Europe, the language may be set to English / Deutsch / Français / Italiano / Español / Nederlands / Svenska / Pусский / Polski, with English as the default.
블루투스 송신기
Bluetooth Transmitter can be set to allow the MX124 to connect to multiple types of devices.
송신기 Enables or Disables the Bluetooth transmitter, and is Disabled by default.
출력 모드 selects the output method. By default, audio is output to Bluetooth headphones and main zone speakers, but this setting may be changed to Bluetooth Only.
연결된 장치 displays the Bluetooth device connected to the MX124.
장치 목록 displays available Bluetooth devices when pairing mode is activated. Eight Bluetooth headphones can be registered, though only one can be in use at a time. To remove a saved Bluetooth device from the device list, select Forget Device.
ZONE2 설정 / ZONE3 설정
ZONE2 Setup / ZONE 3 Setup adjusts settings for audio playback with ZONE2 and ZONE3
베이스 adjusts the bass between -10 dB – +10 dB.
고음부 adjusts the treble between -10 dB – +10 dB.
하이패스 필터 sets the cut off point of low ranges to reduce distortion in bass. By default, the bass is not attenuated.
L Ch Level adjusts the left channel output between -12 dB – +12 dB
R Ch Level adjusts the right channel output between -12 dB – +12 dB
채널 resets whether playback is in Stereo or Monaural. By default, Stereo playback is set.
HDMI Audio (ZONE 2 only) selects the audio signal format for playing an HDMI source in ZONE2. By default, the HDMI audio signal passes through the MX124 into the connected device in ZONE 2, but may be changed to PCM so the audio signal is converted to a PCM signal that can be output from the ZONE2 PRE OUT connectors.
볼륨 레벨 sets the volume output level. By default, this setting is Variable so the volume may be adjusted, but it may be set to a fixed level.
음량 제한 sets the maximum volume from 60 to 80, and the default is 70.
전원 켜기 제한 sets the volume level when the MX124 is turned on. By default, the unit will maintain the volume level it was last set at, but it may be set to turn on with Mute on, or to a specific volume level from 1 to 98.
음소거 수준 sets the amount of attenuation when mute is on. By default, Full mute is set, but this may be changed so the mute level is -40 dB or -20 dB lower than the current volume.
영역 이름 변경
Zone Rename sets the display title for each zone, or reset the names to their defaults.
빠른 선택
이름 sets the name of the Quick Select input.
Input Source/Master Volume/Sound Mode/Channel Level/Audyssey Parameters/ DFR/ Dialogue Enhancer/HDMI Video Output/ Playback Content/Speaker Preset/All Zone Stereo/TV Audio Sharing/Dirac Live registers current set sings with Quick Select, and can be Disabled so the current settings are not registered when Quick Select is registered.
Trigger Out 1/Trigger Out 2
Trigger Out 1 and Trigger Out 2 set the conditions for activating trigger out. When a mode is On in this setting, trigger will activate in the selected mode.
자동 대기
Auto Standby sets how long it takes for the MX124 to go into Standby when the unit is not being used.
메인 존 establishes when the MX124 will go into Standby. By default, the MX124 will not go into Standby automatically (15 min in Europe), but this can be changed so it goes to Standby after 15, 30, or 60 minutes of dormancy.
존2/존3 establishes when the MX124 will shut off after lack of use. By default, the MX124 does not automatically switch off, but it may be set to turn itself off after 2, 4, or 8 hours.
전면 디스플레이
명도 adjusts the brightness of the front panel display between Bright, Dim, Dark, and Off. Channel Indicator sets whether the Input signal display, or Output signal display is used for the channel indication on the display. By default, the Output signal display is used.
펌웨어
업데이트 확인 checks for firmware updates, and allows the user to chose to Update Now or Update later.
자동 업데이트 turns on automatic updates so the MX124 will automatically install the most recent firmware version while in Standby mode.
Allow Update Enables and disables updates for the MX124.
정보
오디오 shows the audio information for MAIN ZONE. Sound Mode shows the currently set sound mode, Input Signal shows the input signal type, Format shows the number of input signal channels, Sample Rate shows the input signals sampling frequency. Offset shows the dialogue normalization correction value, Flag is displayed when inputting signals including a surround back channel.
동영상 shows the HDMI signal information.
존 shows information about current settings for MAIN ZONE, ZONE 2, and ZONE 3.
Firmware displays firmware information and the current DTS version.
공고 displays and sets notifications, including whether or not notifications display when the power is turned on.
저장 및 로드 saves and restores device settings by using a USB memory device. Save Configuration stores the current settings of the MX124 to the USB memory device, this may take up to ten minutes. Load Configuration restores settings saved to an USB memory device.
설정 잠금
Setup Lock protects settings from inadvertent changes. By default, protection is turned off.
다시 놓기 
Reset reverts settings to their default factory settings. This can be done to All Settings, or just Network Settings.

오디오 사양

Unless otherwise noted, the below MX124 Specifications were taken with Audyssey® and Dirac®  bypassed.
주파수 응답
  0.5Hz~20kHz에서 ±20dB
Subwoofer: ±0.5 dB from 20 Hz – 8 kHz
Total Harmonic Distortion 0.005% maximum from 20 Hz to 20 kHz at rated Output
신호 대 잡음비
Phono: 86 dB below 10 mV Input (A Weighted)
High Level: 96 dB below rated Output (A Weighted)
정격 출력 Voltage
언밸런스: 2.5V
Balanced: 5.0 V
최대 볼륨tage 출력
언밸런스: 6V
Balanced: 12 V
출력 임피던스
220옴
입력 임피던스
Phono: 47k ohms, 65 pf
High Level: 20k ohms Unbalanced and Balanced
정격 출력에 대한 감도
Phono: 4.5 mV
High Level: 450 mV Unbalanced
900 mV Balanced
최대 입력 신호
Phono: 50 mV
High Level: 4.5 V Unbalanced and Balanced

비디오 사양

신호 시스템
NTSC/PAL
HDMI(입력 및 출력)
7 inputs, Zone 1 has two 8K outputs, Zone 2 has one 4k output, HDR, Dynamic HDR, HDR 10+, HLG, Dolby Vision, eARC, Dynamic Lip-sync, 4:4:4 Color, REC. 2020, 3D Video pass-through
HDMI/Coaxial/Optical Digital Input Rate
32k Hz to 192k Hz, 24-Bit, Dolby Digital, DTS, PCM
비디오 해상도
8K/60Hz
4K/120Hz
고정 금리 링크(FRL)
40Gbps
18Gbps TMDS
HDCP
버전 2.3
노름
가변 재생 빈도(VRR)
빠른 프레임 전송(QFT)
자동 저지연 모드(ALLM)
스케일링
Digital Video Inputs scaled to a 8K Digital Signal
Component Video Input Level
Y Output Level 1.0Vp-p (75 ohms)
PB/CB Output Level 0.7Vp-p (75 ohms)
PR/CR Output Level 0.7Vp-p (75 ohms)
Composite Video Input Level
1Vp-p (75 ohms)

일반 사양

블루투스 통신 시스템
Version 5.4, A2DP, SBC, 2.4G Hz
무선랜
Network type: Conforming to IEEE 802.11a/b/g/n/ac
Security: WEP 64 bit, WEP 128 bit, WPA/WPA2-PSK (AES), WPA/WPA2-PSK (TKIP), WPA3-SAE (AES)
Used frequency range: 2.4 GHz, 5 GHz
전력 요구 사항
필드 AC VoltagMX124의 변환은 불가능합니다. MX124은 다음 AC Vol 중 하나에 대해 공장에서 구성됩니다.tag에스:
100 Volts, 50/60 Hz at 75 watts
110 Volts, 50/60 Hz at 75 watts
120 Volts, 50/60 Hz at 75 watts
220 Volts, 50/60 Hz at 75 watts
230 Volts, 50/60 Hz at 75 watts
240 Volts, 50/60 Hz at 75 watts
대기, 0.5와트 미만
메모: 올바른 볼륨은 MX124 후면 패널을 참조하세요.tage.
전체 치수
너비: 17 1/2인치 / 44.5cm
Height: 7 3/4 inches / 19.7 cm (including feet)
Depth: 17 inches / 43.2 cm (including the front panel, knobs, rear panel connections, and Wi-Fi antennas.
무게
Net: 29 pounds / 13.2 kg
In shipping carton: 53 pounds / 24 kg
배송 카톤 치수
폭: 25인치 / 63.5cm
깊이: 28인치 / 71.1cm
Height: 18 3/8 inches / 46.7 cm

포장 지침

배송을 위해 장비를 다시 포장해야 하는 경우 장비는 아래 표시된 대로 정확하게 포장되어야 합니다. 4개의 플라스틱 다리를 장비 바닥에 부착하는 것이 매우 중요합니다. 이렇게 하면 하단 패드의 적절한 장비 위치가 보장됩니다. 그렇지 않으면 배송이 손상될 수 있습니다.

부품 목록

수량	부품 번호	설명
1	34256	배송 상자만
4	34670	End cap foam
2	34493	Spacer pad
1	753101	Manual Package
1	33697	상자 내부만
1	33725	Inner carton top pad
1	34576	바닥 패드
4	17937	플라스틱 발
4	400159	#10-32 x 3/4” 나사
4	404080	#10 평와셔
1	34499	액세서리 박스
2	34500	Slotted foam
1	34501	Divider foam
1	HR095	원격
1	노트 1	전원 코드
2	노트 2	안테나
1	320967	Dirac Microphone
1	320415	오디세이 마이크

원래의 배송 상자와 내부 부품은 모두 양호한 상태로 수리할 수 있는 경우에만 사용하십시오.
배송 상자나 내부 부품이 필요한 경우 McIntosh Laboratory의 고객 서비스 부서로 전화하거나 편지를 보내주십시오. 3페이지를 참조하십시오.The MX124 is designed to employ non-McIntosh provided services some of which require separate customer subscriptions and some of which do not, as part of the Product’s functionality. Because McIntosh cannot control the providers of such services or the services themselves, the owner of the Product therefore assumes all risks related to the use of services provided by anyone other than McIntosh itself. McIntosh cannot and does not warrant against, and shall have no liability of any kind for any of the following that are attributable to non- McIntosh providers or services: (i) interruption, discontinuance, or other unsatisfactory performance of service; (ii) reduced Product functionality that is so attributable; or (iii) any other loss or damage of any kind that is so attributable.
McIntosh Laboratory, Inc.의 상표:
다음은 전 세계 여러 관할권에 있는 McIntosh Laboratory, Inc.의 등록 상표입니다. 서면 McIntosh 로고; 매킨토시 글로브 로고; Mc 로고; 파워가드; 파워 가드 스크린 그리드 센서; 파워 가드 SGS; LD/HP; 동적 전력 관리자; 4DPM8 로고; HXD; HXD 로고; 비하인드 더 사운드; 전설적인 성능. 다음은 전 세계 여러 관할권에 있는 McIntosh Laboratory, Inc.의 상표입니다. Autoformer; 센트리 모니터; 솔리드 신치; McIntosh 모노그램 방열판; 하이브리드 드라이브; 듀얼View; 삼루타View; 소리로 만들어졌습니다.
앞서 언급한 등록 상표 및 기타 상표는 McIntosh Laboratory, Inc.의 명시적인 서면 허가 없이는 어떤 방식으로든 사용, 복제 또는 등록할 수 없습니다.
제품의 지속적인 개선은 예고 없이 디자인을 개선할 수 있는 권리를 보유하는 McIntosh Laboratory Incorporated의 정책입니다.

매킨토시 연구소, Inc.
2 챔버스 스트리트
빙햄턴, NY 13903
www.mcintoshlabs.com
미국에서 인쇄됨
© 2026 매킨토시 연구소, Inc.
매킨토시 부품 번호 24133500