LTECH KMS1 Switch Module
제품 소개
- Fully supports major smart home ecosystems including Apple Home, SmartThings, Google Assistant, and Amazon, enabling unified management across platforms.
- Built-in Thread module, compatible with the Matter protocol, supports Siri, Google, and Alexa voice control.
- Supports OTA firmware updates to continuously receive the latest features and security patches, ensuring long-term device stability.
- Parameter settings for switch type and power-on status can be completed via the NFC Lighting App.
- Reserved mechanical switch/reset switch interface accommodates both traditional operating habits and smart scenario requirements.
기술 사양
| 모델 | 케이엠에스1 |
|---|---|
| 무선형 | 실보다 중요한 것 |
| 채널 전환 | 1채널 |
| 운영 볼륨tage | 100-240V~, 50/60Hz |
| 릴레이의 최대 부하 매개변수 | Resistive load: 1000W@230Vac, 500W@110Vac Capacitive load: 400W@230Vac, 200W@110Vac |
| 릴레이 서지 전류 | 70A@10ms |
| 작동 온도 | -25℃~50℃ |
| 제품 크기 | 길이45×너비45.5×높이20.5(mm) |
| 제품 무게 | 38g |
| 표준 | UL 8750, EN 61347-2-13:2014+A1:2017, EN 61347-1:2015+A1:2021, EN 62493:2015/A1:2022 |
제품 이미지
차원
- 단위: mm
- 크기: 45 x 45.5 x 20.5
배선도
- Mechanical Switch Wiring Diagram
Includes connections for load, line (L), and neutral (N).
- Push Switch Wiring Diagram
Includes connections for load, line (L), and neutral (N).
NFC 조명 앱 사용
Scan the QR code with your mobile phone and install the APP as prompted. Compatible with iOS 13 or above and Android NFC-enabled models.
Read the Device
Click “Read/Write LED driver” in the APP [home page], place the sensing area of the phone near the NFC identification point of the driver, and read the device parameters.
매개변수 편집
Click “Parameter Management” to select the switch type. When selecting a reset switch, you can configure the device’s power-on state function.
Add to Matter Platform Instructions
- This device supports control via major smart home platforms, including Apple Home, Amazon Alexa, Google Home, Smart Things, and others.
- To connect Matter over Thread devices, prepare a Matter hub supporting Thread border router functionality from major platforms.
호환 모델
설정 예ample
- This guide uses Apple Home as an example. Prepare an iPhone (iOS 16.2 or later) or iPad (iPadOS 16.2 or later) with the latest firmware, along with an Apple HomePod mini also running the latest firmware. Connect your iPhone or iPad to your home Wi-Fi network, launch the Apple Home app, and follow Apple’s instructions to set up the HomePod mini.
- For iPhone models 15 and above, no Matter hub is required; they can be added directly.
액세서리 추가
- Open the Apple Home app and tap “Add or Scan Accessories.” Add the device to Apple Home by scanning the QR code sticker on the device.
- *You can also activate service via NFC: Simply hold your iPhone 16 or later model near the device’s NFC sensor area to be recognized and activated.
제어 장치
After successfully adding the device to Apple Home, tap the device icon to turn it on or off.
고급 기능
Supports creating groups, scenes, and automations, as well as remote control and scheduled control. Devices can also be controlled via Siri voice commands.
공장 설정 복원
Reset Button Reset
Press and hold the reset button for 15 seconds until the indicator light flashes red rapidly, then release. Within 3 seconds, press the reset button three times briefly. The red light will then switch to slow flashing, indicating the device has begun restoring factory settings. When the indicator light flashes blue rapidly, the restoration is complete.
파워 온 리셋
정전이 발생한 경우tage, use the switch to power on the device for 15 seconds before powering it off. Repeat this power cycle six times consecutively (each cycle consisting of 2 seconds on and 5 seconds off). After the seventh power cycle, the load lamp will flash three times, indicating a successful reset to factory settings.
주목
- 제품 설치 및 시운전은 자격을 갖춘 전문가가 수행해야 합니다.
- Our company products are not waterproof or lightning-proof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure they are mounted in a waterproof enclosure or in an area equipped with lightning protection devices.
- 좋은 방열은 제품의 작동 수명을 연장시킵니다. 통풍이 잘 되도록 해주세요.
- 작업 볼륨이 있는지 확인하십시오.tag사용된 e는 제품의 매개변수 요구사항을 준수합니다.
- 사용하는 와이어의 직경은 연결하는 조명기구를 로드할 수 있어야 하고 확실한 배선을 보장해야 합니다.
- 잘못된 연결로 인해 조명기구가 손상될 수 있으므로 제품의 전원을 켜기 전에 모든 배선이 올바른지 확인하십시오.
- 고장이 발생한 경우, 제품을 직접 수리하려고 하지 마십시오. 질문이 있는 경우 공급업체에 문의하십시오.
보증 계약
배송일로부터 보증 기간: 2년. 품질 문제에 대한 무료 수리 또는 교체 서비스는 보증 기간 내에 제공됩니다.
보증 제외 사항
- 보증 기간을 초과합니다.
- 고용량으로 인한 모든 인공 손상tage, 과부하 또는 부적절한 작동.
- 물리적 손상이 심한 제품.
- 천재지변이나 불가항력으로 인한 손해.
- 보증 라벨과 바코드가 손상되었습니다.
- No contract signed by our company.
문서 / 리소스
 |
LTECH KMS1 Switch Module [PDF 파일] 사용 설명서 KMS1 Switch Module, KMS1, Switch Module, Module |