KHADAS Mind Graphics 2 First Time Setup Tutorial Instruction Manual

Mind Graphics 2

First-Time Setup Tutorial

비디오 튜토리얼

When using Mind Graphics 2 with Mind for the first time, please watch the video tutorial and carefully follow the instructions to complete the setup. Otherwise, Mind Graphics 2 may not function properly:

Mind Graphics 2 First-Time Setup – Video Tutorial
https://dl.khadas.com/products/mind-graphics-2/videos/mind-graphics-2-first-time-setup-tutorial-en.mp4

텍스트 튜토리얼

또는 아래 지침을 읽고 주의 깊게 따라 설정을 완료할 수도 있습니다.

When using Mind Graphics 2 for the first time, please follow these steps to ensure proper display output:

1. 모든 Mind 소프트웨어를 최신 버전으로 업데이트하십시오. 여기에는 Mind App, BIOS 및 EC가 포함됩니다.
2. Connect Mind to Mind Graphics 2, whilst keeping the monitor connected to Mind’s HDMI port.
3. Mind App을 사용하여 그래픽 카드 드라이버와 패치를 설치하십시오.
4. Use the Mind App to modify the “Device Mode When Unplugged” to complete the setup.

자세한 지침:

1. Before using Mind Graphics 2, upgrade Mind’s software to the latest version:

a) Connect Mind to a power source using the provided power adapter and USB-C cable.
메모: Do NOT connect Mind to Mind Graphics 2 until you reach step 2c.
b) Prepare an HDMI cable and connect Mind to a monitor.
c) Press Mind’s power button to power it on.
d) Open the Mind App and follow the on-screen prompts to complete the update. Alternatively, right-click the Mind App icon in the Windows system tray (bottom-right corner) and select 업데이트 확인.

선택 과목: You can also visit the Khadas web사이트 (https://dl.khadas.com/products/mind-series/app/) to manually download and install Mind App v1.60 or later.
e) Open the Mind App, then go to Mind > Device Upgrade > BIOS Upgrade. Click Check for updates and upgrade the BIOS to the latest version. Once the update is complete, Mind will restart automatically.

f) Update the EC firmware (Mind 1 only):
After the restart, open Mind App again, go to Mind > Device Upgrade > EC Firmware Upgrade, click Check for updates, and update the EC firmware to the latest version. After the upgrade, Mind will automatically restart.

2. Connect Mind to Mind Graphics whilst keeping the monitor connected to Mind:

a) After Mind restarts, select 시작 > 힘> 닫다 아래에 전원을 끄려면.

b) Use the provided AC power cord to connect Mind Graphics 2 to a 100V-240V power outlet. Mind Graphics 2 will automatically power on, and the indicator light will breathe slowly in white color.

c) Place Mind into Mind Graphics 2, ensuring that the Mind Link interface is properly aligned. Then press Mind’s power button to power it on.

메모: 이 시점에서 모니터는 HDMI 케이블을 통해 Mind에 연결되어 있어야 합니다.
d) When connected together, Mind Graphics 2 will provide power to Mind through the Mind Link interface, and you are free to unplug Mind’s USB-C power cable.

3. Use Mind App to install the graphics card driver and patch:

a) Go to the Mind App, follow the on-screen instructions, and click Go & Install > Update Now > OK 그래픽 카드 드라이버를 설치하려면

b) After installing the driver, follow the prompt and click Restart Now to restart Mind.
c) After restarting, open the Mind App again. Follow the on-screen instructions and click 지금 설치하기 패치를 설치하려면

d) After installing the patch, follow the prompt and click 지금 다시 시작하세요 to restart Mind again.
Note: If the graphics driver and patch cannot be installed through the Mind App, please visit https://dl.khadas.com/products/mind-graphics-2/drivers/ to manually download and install them.

4. Use Mind App to modify the “Device Mode When Unplugged” to complete the setup:

전원 연결이 끊어지면 Mind가 들어가는 기본 모드는 다음과 같습니다. 잠. To ensure a smooth experience when using Mind with Mind Graphics 2, you need to go to Mind App and set 플러그를 뽑았을 때 장치 모드 에게 동면하다.

메모: 저장하실 필요는 없습니다 files manually before disconnecting Mind from Mind Graphics 2 when the device mode is set to Hibernate; your data remains safe. To wake Mind up after reconnecting with Mind Graphics 2 or Mind Dock, press the power button.

After completing the above steps, Mind Graphics 2′ HDMI and DisplayPort ports will be able to output display signals properly. You can now switch the HDMI output from Mind to Mind Graphics 2 and enjoy the accelerated graphics from the RTX 5060 Ti.

노트

1. When using Mind with Mind Graphics 2 across different scenarios, do NOT set 플러그를 뽑았을 때 장치 모드 에게 잠. This may cause graphics detection issues and prevent Mind Graphics 2 from functioning properly.
   If this occurs, press and hold Mind’s power button for 8 seconds until Mind Graphics 2’s indicator light flashes, then press the power button again to restart.
2. If you have swapped Mind from other expansion modules (such as Mind Dock) to Mind Graphics 2, and the HDMI or DisplayPort of Mind Graphics 2 does not have any display output, keep Mind connected to Mind Graphics 2, then press and hold Mind’s power button for 8 seconds until Mind Graphics 2’s indicator light flashes, finally press Mind’s power button again to restart it.