Keeson RC309A Remote Control User Manual

Keeson RC309A Remote Control

명세서

• 제품 이름: 원격 제어
• 모델: RC309A
• 입력: AAA 2V 배터리 1.5개
• 제조업체: Keeson Technology Corporation 제한
• 제조 국가: 중국

사용 설명서

Figure 1 illustrates the buttons on the remote control.

1. 머리 위로
   Press and hold the HEAD UP button of the remote, the head actuator moves out, stop when released.
2. 머리를 숙이다
   Press and hold the HEAD DC NNN button of the remote, the head actuator moves in, and stops when released.
3. 발을 위로
   Press and hold the FOOT UP button of the remote, the foot actuator moves out, stop when released.
4. 발을 아래로
   Press and hold the FOOT button of the remote, the foot actuator moves in, stop when released.
5.  평평한
   lick FLAT button, the bed goes flat. Stop when you click any button during the process of going flat.
6. 마사지 헤드 
   lick MASSAGE HEAD button, head massage motor switches massage intensity, massage intensity switches among 0-1-2;
7. ZG 버튼
   Click the ZG button, the actuator moves to the ZG position, stop when clicking any button during the movement.
8. Memory Favorite position
   licking once will move the app to the Favorite position; long-pressing to memorize the position. The backlight will flash twice, and releasing the button will continue the flashing.
9. 잠그다
   Press and hold the child lock button until the red light flashes twice, indicating that the child lock is successfully engaged. During the locking process, pressing any button will cause the red light to flash for 2 seconds, indicating that the lock is engaged.

제품 정보

• Product Name: REMOTE CONTROL
• 모델: RC309B
• Input: 2 x Battery AAA 1.5V
• 제조사: Keeson Technology Corporation Limited
• 제조국 : 중국

FCC 경고:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can adiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• 수신 안테나의 방향을 바꾸거나 위치를 바꾸세요.
• 장비와 수신기 사이의 거리를 넓힙니다.
• 수신기가 연결된 회로와 다른 회로의 콘센트에 장비를 연결하세요.
• 도움이 필요하면 딜러나 숙련된 라디오-TV 기술자에게 문의하세요.

준수에 대한 책임이 있는 당사자가 명시적으로 승인하지 않은 변경 또는 수정은 장비를 작동할 사용자의 권한을 무효화할 수 있습니다. 이 장치는 FCC 규정의 15부를 준수합니다. 작동은 다음 두 가지 조건에 따릅니다.

1. 이 장치는 유해한 간섭을 일으키지 않습니다.
2. 이 장치는 원치 않는 작동을 일으킬 수 있는 간섭을 포함하여 수신되는 모든 간섭을 수용해야 합니다.

RF 노출 정보

이 장치는 일반적인 RF 노출 요구 사항을 충족하는 것으로 평가되었습니다. 장치는 제한 없이 노출 조건에서 사용할 수 있습니다.

ISED RSS 경고:

This device complies with Innovation, Science and Economic Development Canada licence, exemplifying RSS standard(s). Operation is subject to the following two conditions:

• 이 장치는 간섭을 일으켜서는 안 됩니다.
• This device must accept any interference, including interference that mav cause undesired operation of the device.

문제 해결

If the remote control is not functioning as expected:

• 배터리 확인: Ensure that two AAA 1.5V batteries are correctly inserted and have sufficient charge.
• 아동 잠금: If the remote is unresponsive and the red light flashes for 2 seconds when a button is pressed, the child lock may be engaged. Refer to section 1.7 to disengage the child lock.
• 간섭: This device complies with FCC rules regarding interference. If you experience unexpected operation, it might be due to external interference. Ensure there are no strong radio frequency sources nearby.

자주 묻는 질문

Q: What type of batteries does the RC309A remote control use?
A: The remote control requires 2 x AAA 1.5V batteries.

Q: How do I stop the bed from moving once I’ve pressed a position button?
A: For continuous movements like Head Up/Down or Foot Up/Down, release the button to stop. For preset positions like Flat or ZG, clicking any button during the movement will stop the process.

Q: What does it mean if the red light flashes for 2 seconds when I press a button?
A: This indicates that the child lock feature is currently engaged. You will need to disengage the child lock to use the remote’s functions (refer to section 1.7).

질문: 리모컨을 개조할 수 있나요?
A: Any changes or modifications not expressly approved by the manufacturer could void your authority to operate the equipment and are not recommended.