INTERRA iX7 Touch Panel Instruction Manual

INTERRA iX7 Touch Panel

명세서

• 제품 코드: ITR165-X0X4
• 전원 공급 장치: 12-30 VDC or PoE+
• 공칭 전류 소비: 350 mA @12 VDC
• 최대 전류 소비량: 640 mA @12 VDC
• Communication Current (from KNX Bus): 5mA
• 공칭 전력 소비: 4.2W @12VDC
• 최대 전력 소비: 7.7W @12VDC
• CPU: 쿼드코어 ARM Cortex-A53
• 메모리: 2GB DDR3
• 저장: 8GB 메모리
• 운영 체제: Interra Operation System based on AOSP 7.1
• 보호 유형: 아이피 20
• USB: 2 x USB2.0
• KNX: 1 x KNX Connector
• 주변 장치: Temp/Hum Sensor, MEMS Microphone
• 단추: 리셋 버튼
• 회로망: 100Mbps 이더넷
• 실시간: Real Time Clock up to 5 days
• GPIO: 6 Digital Dry Contact Inputs (the Sixth input supports Digital/Analog Mode), 6 Relay Outputs
• 온도 범위:
  • 작동: 0°C ~ 45°C
  • 보관 : -15 ° C ~ 70 ° C
• 치수:
  • Panel: 125 x 210 x 54.15 mm (W x H x D)
  • Mounting Box: 116 x 201 x 65 mm (W x H x D)
• 구성: With Interra Configurator Software

설명

Interra iX7 touch panel is designed to control the entire automation system from a single smart point. Interra İX7 can control complex systems such as switches, simple sensors, lighting, camera systems, and alarm systems from a central point. Moreover, iX7 can also control the air conditioning systems with 2 2-point mode by thermostat functionality. Mobile control can be done by downloading InterraX software from online software markets related to IOS or Android-based devices. Also, the configuration software (Interra Configurator) can be downloaded from our web사이트 (www.interratechnology.com) for the iX7 touch panel configuration.

MODELS AND VARIATIONS

MAIN FUNCTIONAL CHARACTERISTICS

• Automation Control: Control EIO (IO Module controlled over ethernet) and KNX automation systems with the Interra Touch Panel.
• 타이머 기능: Schedule operations daily, weekly, monthly, or annually using the panel s timer.
• 보안 제어: Manage security systems and view cameras via the panel and mobile apps.

사이

권tage: The panel is powered with 12 12-30 VDC via 2 2-pos red coloured connectors. The connector label shows the correct polarity for cable connections.
KNX: The panel has a blue 2 2-pos connector for the KNX port. The connector label shows the correct polarity for cable connections.
USB: The iX7 features two USB host connectors on the side panel for storage expansion.
이더넷: The panel includes a standard 10/100Mbps RJ45 Ethernet connector.
입출력: The panel has 6 digital dry contact inputs and 6 relay outputs, Input 6 (the sixth input) input)” can operate in digital or analog mode. A temperature sensor can be connected to input 6. Output relay contacts capable of driving 250VAC 5A resistive loads.

메모: Input 6 operates in analog or digital mode on products that support analog functionality.

치수

월tage Box:

장치

일반 기능

설치

1. First, the mounting box must be attached to a suitable place on the wall. The long side of the mounting box should be placed at a right angle to the ground.
2. Then, iX7 is attached to the mounting box as shown in the left figure, and the mounting process is completed.

안전 지침

• 이 장치는 자격을 갖춘 전기 기술자나 허가받은 인원만이 설치하고 작동시킬 수 있습니다.
• For planning and construction of electrical installations, the appropriate specifications, guidelines, and regulations in force in the respective country must be followed.
• 메인볼을 연결하지 마세요tage (230 VAC) or any other external voltages to any point of the KNX bus.
• 외부 볼륨 연결tage might put the KNX system at risk. Please do not overlook this issue.
• Ensure there is sufficient insulation between the 230 VAC voltage cables and the KNX bus.
• The maximum screwing torque value should be 1.2 Nm during the mounting process of the mount case and touch panel.
• Do not use aerosol sprays, solvents, or abrasives that might damage the device.
• 장치의 작동 및 시각적 검사를 위해 접근성이 제공되어야 합니다.