igloo SK4 Lockbox Installation Guide

igloo SK4 Lockbox

명세서

• IP66 방수
• IK-07 level impact protection
• Supports both battery and DC power
• Backlit physical keypad
• algoPIN technology for remote access

무엇이 포함됩니까?

• 락박스
• 장착 나사
• 나사 앵커
• Screw O-Rings
• AAA 배터리
• 배터리 커버
• 스토리지 가드
• 플러그

당신에게 필요한 것

안녕하세요! 여기서 시작하세요

설치 단계

나사로 장착

• Open the lockbox lid and take out all of the items inside.
• Find a place to install your Lockbox. Installing it closer to your locks and entryway will enable easier operation.

1단계: 장착 구멍 표시
Tear off & tape the drill sheet where you would like to install the lockbox and mark the locations of the 4 x pilot holes.

2단계: 예비 구멍 뚫기

중요한
To ensure secure installation, use the recommended pilot hole and anchor bolt guidelines below.

Drill the pilot hole size for the mounting surface as specified. Note if Anchor Bolts are required.

The pilot holes should be drilled to a depth of 50mm / 2″.

Step 3: Insert Anchors (if required)
Insert the 4 x screw anchors (C) for Brick, Concrete, Masonry or Drywall if required. The anchors should tightly fit into the pilot holes to ensure a secure hold.

Step 4: Access Mounting Holes
Remove the 4 plugs (H) & storage guard (G) to access the mounting holes.

5단계: 나사로 고정
Align the lockbox to the prepared holes and insert the screws (B) with a screwdriver in a clockwise twisting motion. Use the rubber O-rings (D) as shown if exposed to wet conditions.

Step 6: Replace Storage Guard
Replace the storage guard (G) and snap it into place.

7단계: 배터리 삽입

• Open the battery cover (F) and insert the 4 x AAA (E) batteries as indicated. Close the battery cover.
• For temps below -20C (-4F) use LiMn02 AAA batteries for optimal battery life.

8단계: 뚜껑을 닫습니다.
Close the lid firmly and the lockbox should automatically lock after 3 seconds with a green Status LED.

Step 9: Test Unlocking
Unlock the lockbox with the default pin by entering the code 1234567890.

축하해요!
You have installed your lock. Download the igloo home application from the App Store or Google Play Store to complete setup & configure your smart lock.

특징

• 대용량 저장 공간
  Ample interior storage to protect more than just keys such as cards, ID badges, fobs, remotes, asset tags, small tools & more.
• Rugged Outdoor Security
  Built to protect with IP66 waterproofing, IK-07 level impact protection, a secure locking mechanism & tamp어 알람.
• View Device Activity Logs
  View all access activity by credential used, and view the battery life in the IGH mobile app.
• 쉬운 설치
  Supports both battery and DC power for flexibility in low- or high-traffic areas. The compact design makes it easy to retrofit or install in new builds without complicated wiring.
• Backlit Physical Keypad
  Large, easy to press, tactile buttons built for reliable PIN code entry and readability in direct sunlight or pitch black conditions.
  Access from Anywhere a igloo PIN technology helps you generate a PIN code from anywhere and share it with anyone for instant access.
• Apple Watch Convenience
  Use your Apple Watch to unlock via voice, a finger tap or gestures. Works with watch OS 7 and up.
• 자동 잠금 해제
  Your lockbox automatically unlocks when you return home. Never fumble with keys again.
• Relock Reminder
  Intuitive audio and visual alerts will prompt you to recharge the batteries when it runs low.
• 보안 잠금
  Disable the keypad after several incorrect access attempts to ensure your property is always secure.
• 미끼 PIN 코드
  실제 PIN 코드 앞에 임의의 숫자를 입력하여 보안을 강화하고 구경꾼을 쫓아내십시오.
• 방해 경보
  The lock will sound an alarm if the bolt tongue cannot be extended or retracted fully to alert the user of any obstructions.
• 배터리 부족 경고
  Intuitive audio and visual alerts will prompt you to recharge the batteries when it runs low.
• 자동 잠금
  Automatically locks once the lockbox is shut to give you greater peace of mind.
• Tamp어 알람
  The lock will sound an alarm if the lid is opened without unlocking to alert and deter potential tamp시도를 시도합니다.
• 긴급 점프스타트
  Easily jumpstart the reader with a Type-C cable connected to a power bank or compatible phone if battery is drained.
• 볼륨 조절
  원하는 대로 잠금 볼륨을 조정하세요. 레벨 0(음소거)부터 5(가장 큰 소리)까지 선택합니다.

Audio and LED Indicators

문제 해결

• I have placed the batteries inside but the device won’t turn on.
  Check that the batteries have been inserted in the correct orientation. There should be two long, and two short beeps when the batteries are installed correctly. If it still doesn’t work, try a new set of AAA 1.5V batteries.
• I am unable to see the device when trying to pair
  Ensure that the device is receiving power by pressing any button to wake it up. Waking it up will allow it to be seen in the app when pairing.
• The batteries have fully drained. How can I replace them?
  Connect a 5V DC power source via Type – C USB cable. The device will wake up, you can now enter a permanent pin code such as the master pin or use the app to unlock. Once unlocked, ensure that a fresh set of batteries have been inserted before closing.

자주 묻는 질문