ELSYS EXT-Module Wireless Sensors
명세서
- 제품 이름: EXT 모듈
- 모델: EXT-Module, Rev C
- 게시 날짜: 29.04.2025
- 입력 Voltage: 외부 전원 입력, 5-24V
- 출력 볼륨tage: On/off or 0-10V output
- Constant Output: 3.3V
- 출력 전류: Max 10mA @ 12V in, max 5mA @ 24V in
- 무선 연결 : Compatible with ELT LoRa
제품 사용 지침
설치
- Ensure the ELT LoRa device is powered off before installing the EXT-Module.
- Insert the EXT-Module into the designated slot inside the ELT LoRa device.
- Connect external power input (5-24V) to the designated port on the EXT-Module.
- Make necessary connections for sensors or actuators as per your application requirements.
- Power on the ELT LoRa device and verify proper functionality of the EXT-Module.
사용 모드
- The EXT-Module can be used in two primary modes.
- Class C Device: For connecting external power and actuators, set the EXT-Module accordingly.
- Class A Device: For connecting sensors, configure the EXT-Module to operate as a class A device.
출력 구성
- The EXT-Module offers on/off or 0-10V output options. For 0-10V output, ensure the external power supply is at least 11V.
무선 연결
- The EXT-Module is designed to wirelessly connect to the ELT LoRa device for seamless data transmission from sensors or actuators.
소개
- The EXT-module is a module that fits inside the ELT LoRa and is intended for connecting external power and actuators, and is used as a class C device. It can also connect to sensors and be used as a class A device.
맨 위 view
특징
- 외부 전원 연결
- 온/오프 출력
- 0 – 10V 출력
- General-purpose input
- ELT-2 상자 안에 맞습니다.
- ELT-2에 전원 공급
- Switching between functions is done with jumpers.
맨 아래 view
명세서
- 입력 볼륨tage: 5~24V 직류
- On/Off output: 최대 0.7A
- 0 – 10V 출력: 최대 5mA
- 입력은 최대 50V까지 확장 가능
링 다이어그램
- On/off or 0-10V output (for 0-10V, ext. power needs to be at least 11V)
- 외부 전원 입력, 5-24V
- Input to ELT LoRa. 10 or 50V range.
- Connect a 500 ohm resistor between the inputs for 4-20mA (10V range)
- 일정한 3.3V 출력. 최대 10mA @ 12V 입력, 최대 5mA @ 24V 입력
- Electronic systems in Umeå AB Tvistevägen 48, 90736 Umeå, Sweden
- 이메일: info@elsys.se
- Web: www.elsys.se
- 이 문서의 사양은 예고 없이 변경될 수 있습니다.
- ©Electronic systems in Umeå AB 2023
자주 묻는 질문
최대 입력 볼륨은 얼마입니까tage supported by the EXT-Module?
The EXT-Module supports an input voltage range of 5-24V for external power sources.
How can I configure the EXT-Module for sensor usage?
To use the EXT-Module with sensors, set it to operate as a Class A device and make the necessary sensor connections as per the provided instructions.
권장 출력 볼륨은 무엇입니까?tage for actuators?
The EXT-Module provides an on/off or 0-10V output option. For actuators, you can use either mode based on your requirements.
문서 / 리소스
 |
ELSYS EXT-Module Wireless Sensors [PDF 파일] 사용설명서 EXT-Module Wireless Sensors, EXT-Module, Wireless Sensors, Sensors |