Elitech RC-4 Pro 디지털 온도 데이터 로거
제품 끝view 그리고 외관
RC-4 Pro is a recorder used for recording temperature and humidity data during the transportation of food, drugs, chemicals, and other products. It is widely used in various transportation links such as warehousing and logistics, such as containers, refrigerated trucks, refrigerated containers, cold storage, and so on. By using a single button to start/stop recording, you can flip through pages to view various interfaces. Powered by a Single CR2450 battery for easy replacement, Transfer data to the “Jingchuang Data Center” management software through the Type-C interface. And the software can export filePDF, EXCEL, TXT 등의 형식으로 제공됩니다.
제품 끝view
- 에어벤트
- LCD 화면
- 외부 프로브
- 키패드
- 부저
- Type-CC interface
- 매달린 밧줄 구멍
- 장비 명판
- 배터리 커버
기술적 매개변수
작동 지침
Activate the recorder
절연 시트를 제거하고 레코더의 전원을 켭니다.
Install sensors (according to actual needs)
Install sensors according to the requirements, and configure them through the Jingchuang Data Center before enabling the external probe function.
소프트웨어 설치
Please download and install the Jingchuang Data Center software through www.엘리테크로그.com.
매개변수 구성
Connect the recorder to the computer via a USB cable and wait 
until the symbol appears on the screen. Software configuration: If you do not need to modify the default parameters, please click on the Summary menu> Quick Reset button. Can synchronize local time; if there is a need to modify parameters, please click on the Configure Device menu, change parameters, and click Save Parameters to complete the configuration.
메모! To avoid time/time zone errors, please be sure to click on the quick reset or save parameters before first use or after replacing the battery to ensure that the local time is configured in the recorder. Exceeding the limit and shortening the recording interval parameter: By default, to is prohibited; If changed to allow, the recording interval will be automatically shortened to once every 1 minute after the humidity exceeds the limit.
녹음을 시작하세요
Press and hold the button for 5 seconds to activate the recording, and the symbol 
appearing on the screen indicates successful activation.
메모! The continuous flashing of the symbol indicates that the recorder is set with a startup delay. It will start recording after the end of the delayed startup.
Pause the recording
Click the button, and when the Log interface appears, double-click the button. When a symbol 
appears on the screen, it represents a pause in recording.
메모! The pause function can only be used after being configured through the data center software.
녹음 중지
Stop recording: Press and hold the button for 5 seconds, and the symbol
appearing on the screen indicates a successful stop.
메모! The stopping method can be configured through the data center software.
데이터 다운로드
Connect the recorder to the computer via a USB cable and wait until the symbol 화면에 나타납니다.
데이터 센터: The data will be automatically uploaded. Click the export button to select the file format to export the report; If it is not automatically uploaded, please manually click the download button and repeat the operation.
USB 드라이브: directly export the corresponding report file.;
재사용
녹음기를 컴퓨터에 연결하는 것을 중지하고, 데이터/보고서를 저장하거나 내보내고, 4. 매개변수 구성 및 5. 녹음 시작 단계를 반복합니다.
메모! After saving the parameters, the recorded historical data will be cleared. If you forget to save/export data, you can view and manage it
The device accessed ice through the historical data menu of the data center software.
상태 표시
Functions of the keypad
메인 화면
- 배터리 수준
- 중단됨
- 녹음
- USB 연결됨
- Upper and llower limits
- 부저 스위치
- Recording groups
- 월
- 맥스. 값
- 최소 값
- 날짜
- 평균값
- 데이터 영역
- 퍼센tage
- 데이터 단위
배터리 수준
메모: When the battery level is less than 10%, please replace the battery as soon as possible.
배터리 교체
- 배터리 덮개를 엽니다.
- 오래된 배터리를 제거하십시오
- Install a new CR2450 battery and place it in the battery compartment
- 배터리 덮개를 닫습니다.
제품 목록
- 레코더×1
- USB 데이터 라인 ×1
- 외부 온도 프로브×1
- 3V 버튼 배터리(CR2450) x 1
지침
- Please store the recorder in a room-temperature environment.
- When using the recorder for the first time, please make sure to use the Jingchuang Data Center software for the parameter configuration to synchronize system time.
- Please do not remove the battery during the recording process of the recorder.
- If there is no button operation for 15 seconds, the recorder will automatically turn off the screen. Click the button to reset the battery screen.
- After each parameter reconfiguration of the recorder, the previously recorded data will be cleared. Please export the data before saving the parameters;
- To ensure humidity accuracy, please avoid contact with unstable chemical solvents or other chemical substances, especially avoid long-term presence or exposure to high concentrations of ketones, acetone, ethanol, isopropanol, toluene, and other environments.
- The battery symbol on the screen is below one square (
). Please do not use it for long-distance transportation - Propylene glycol liquid is used inside the probe of the gel bottle to simulate the temperature change inside the vaccine, which is more suitable for medical use scenarios.
문서 / 리소스
 |
Elitech RC-4 Pro 디지털 온도 데이터 로거 [PDF 파일] 사용자 매뉴얼 RC-4 Pro, RC-4H Pro, RC-4 Pro 디지털 온도 데이터 로거, 디지털 온도 데이터 로거, 온도 데이터 로거, 데이터 로거 |