DELL Command Configure Software User Manual

노트, 주의 사항 및 경고

메모: 참고사항은 제품을 더욱 효과적으로 활용하는 데 도움이 되는 중요한 정보를 나타냅니다.

주의: 주의는 잠재적인 하드웨어 손상 또는 데이터 손실을 나타내며 문제를 방지하는 방법을 알려줍니다.

경고: 경고는 재산 피해, 신체적 부상 또는 사망의 가능성이 있음을 나타냅니다.

© 2025 Dell Inc. 또는 그 자회사. 모든 권리 보유. Dell Technologies, Dell 및 기타 상표는 Dell Inc. 또는 그 자회사의 상표입니다. 기타 상표는 해당 소유자의 상표일 수 있습니다.

Introduction to Dell Command | Configure

Dell Command | Configure is a software package that provides BIOS configuration capability for Dell client systems. IT administrators can use this tool to configure BIOS settings and create BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI).

메모: Dell Command | Configure replaces Dell Client Configuration Toolkit version 2.2.1.

• 델 사령부 | Configure 4.10.1 이상은 제약 조건이 있는 64비트 SCE를 생성합니다.
• Dell Command | Configure 4.10.1 or later on a 64–bit ARM client machine, generates an ARM-based 64–bit SCE.

For more information, see the Dell Command | Configure 5.x User’s Guide on the Support | Dell site.

주제:

• 버전
• 대상 청중
• 문서 목적

버전

이 장에서는 다음을 제공합니다.view of the Dell Command | Configure version history, including release dates, supported operating systems, and compatible platform architectures to help you identify which version aligns with your system requirements.

Dell Command | Configure supports the following Windows operating systems:

• 윈도우 11
• 윈도우 10
• Windows 사전 설치 환경(Windows PE)

The following table lists the available Dell Command | Configure versions along with their release dates, supported operating systems, and platform compatibility.

표 1. 버전 매트릭스

메모: Starting from the Dell Command | Configure 5.1.0 release, support for 32-bit systems has been discontinued.

대상 청중

The installation guide for Dell Command | Configure is intended for IT professionals and system administrators. It offers comprehensive instructions for configuring BIOS settings and creating BIOS packages using both the Dell Command Configure User Interface (UI) and Command-Line Interface (CLI).

문서 목적

This document provides instructions for installing and configuring BIOS settings and creates BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI) for efficient BIOS management.

Dell 명령 액세스 | 설치 프로그램 구성

Dell 사령부 | 설치 구성 file is available as a Dell Update Package (DUP) at Support | Dell. Follow these steps to download the DUP:

1. 지원으로 이동 | 작은 골짜기.
2. 아래에 어떤 제품을 도와드릴까요, 입력하세요 서비스 Tag 지원되는 Dell 장치를 클릭하고 제출하다, 또는 클릭 개인용 컴퓨터 감지.
3. Dell 장치에 대한 제품 지원 페이지에서 클릭 드라이버 및 다운로드.
4. 딸깍 하는 소리 특정 드라이버를 수동으로 찾기 당신을 위해 [모델].
5. 확인하다 시스템 관리 아래의 체크박스 범주 드롭다운.
6. 위치하고 있다 Dell Command | 구성 in list and select 다운로드 페이지의 오른쪽에 있습니다.
7. 다운로드한 것을 찾으세요 file 컴퓨터에서(Google 크롬에서는 file Chrome 창 하단에 나타남) 실행 파일을 실행합니다. file.
8. 화면의 지시를 따르세요.

Dell Command | Configure for Windows

This section provides details about the supported Windows versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Windows systems.

주제:

• Windows에서 지원되는 운영 체제
  
• 지원 플랫폼
  
• Installing Dell Command | Configure on Windows systems
• Uninstalling Dell Command | Configure from Windows systems
• Upgrading Dell Command | Configure on Windows systems

Windows에서 지원되는 운영 체제

표 2. 지원되는 운영 체제

지원 플랫폼

Table 3. Supported platforms

Table 3. Supported platforms (continued)

메모: Platforms must support WMI-ACPI BIOS for full functionality.

메모: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell

Installing Dell Command | Configure on Windows systems

You can install Dell Command | Configure on Windows systems using either the Dell Update Package (DUP) or the MSI installer.
Both installers support standard and silent (unattended) installation modes.

메모: Microsoft .NET 4.8.1 or later must be installed on the client system to install Dell Command | Configure using the user interface.

메모: If User Account Control (UAC) is enabled on a Windows 10 system, silent mode installation is not allowed. Ensure that you have administrative privileges before installing Dell Command | Configure in silent mode.

필수 조건

Before installing Dell Command | Configure, ensure the following:

• A supported Windows operating system is installed and running.
• Dell Command | Configure installation file is available (downloadable from Support | Dell).
• Administrator privileges are available on the system.
• Microsoft .NET 4.8.1 (for UI) and .NET 8.0 SDK (for Dell Command Secure BIOS Configuration Server) are installed.
• Microsoft Visual C++ Redistributable for Visual Studio 2022 is installed.
• WMI-ACPI compliant BIOS is available for full functionality.

메모:

• The system must be connected to a stable network when installing Dell Command | Configure with support for Dell Command Secure BIOS Configuration.
• On Windows 10 or later, enable 마이크로소프트 .NET 프레임워크 4.8 or later version from the Windows 기능 켜기 또는 끄기 화면.
• The system has limited functionality if it does not have a WMI-ACPI compliant BIOS. Update the BIOS with a compatible version, if available. For more information, see Windows SMM Security Mitigations Table (WSMT) Compliance section in the Dell Command | Configure User’s Guide at Support | Dell.

Install Dell Command | Configure using DUP: Standard installation

To install Dell Command | Configure, run the Dell Update Package (DUP) with default settings. This method simplifies deployment and requires minimal user input.

1. 다운로드한 DUP를 두 번 클릭하고 예를 클릭한 다음 설치를 클릭합니다.
   Dell Command | Configure 설치 마법사가 표시됩니다.
2. 설치 마법사를 실행합니다.
   자세한 정보는 설치 마법사 실행을 참조하십시오.

Install Dell Command | Configure using DUP: Silent installation

To install Dell Command | Configure silently, use the Dell Update Package (DUP) with command-line switches that suppress user prompts. This method enables automated, unattended installation.

1. Browse to the folder where you have downloaded the Dell Update Package (DUP) and open the command prompt.
2. 다음 명령을 실행하세요.

Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.

NOTE: For more information about using commands, type any one of the following commands:

• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.
• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/?.

NOTE: During silent installation using DUP, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server.

Install Dell Command | Configure using MSI file: Standard installation

To install Dell Command | Configure, run the MSI file directly for a standard installation with default settings providing a simple and user-friendly setup process.

1. 다운로드한 Dell 업데이트 패키지(DUP)를 두 번 클릭하고 예를 클릭합니다.
2. 추출을 클릭하세요.
   폴더 찾아보기 창이 표시됩니다.
3. Specify a folder location on the system, or create a folder to extract the files, and click OK.
4. 에게 view 추출된 files, 클릭 View 폴더
   폴더에는 다음이 포함되어 있습니다. files:
   ● 1028.mst
   ● 1031.mst
   ● 1034.mst
   ● 1036.mst
   ● 1040.mst
   ● 1041.mst
   ● 1043.mst
   ● 2052.mst
   ● 3076.mst
   ● Command_Configure.msi
   ● mup.xml
   ● package.xml
5. Dell Command | Configure 설치 마법사에 액세스하려면 Command_Configure.msi를 두 번 클릭합니다.
6. 설치 마법사를 실행합니다.
   자세한 정보는 설치 마법사 실행을 참조하십시오.
   After you install Dell Command | Configure , you can use the GUI or the CLI to configure the client systems. For more information about configuring the systems, see the following documents at Support | Dell:
   ● Dell Command | Configure Command-Line Interface Reference Guide
   ● Dell Command | Configure User’s Guide

설치 마법사 실행

To run the installation wizard for installing the Dell Command | Configure .msi file 기기에서:

1. Browse to the folder in which you have extracted the Command_Configure.msi or DUP file.
2. Right-click the .msi or DUP and click Run as administrator.
   설치 마법사가 표시됩니다.
3.  다음을 클릭하세요.
   라이센스 계약 화면이 표시됩니다.
4. 사용권 계약을 읽고 사용권 계약의 조건에 동의합니다를 클릭한 후 다음을 클릭합니다.
   고객 정보 화면이 표시됩니다.
5. Type the username and organization, select one of the following options, and then click Next.
   ● For multiple users, select Anyone who uses this computer (all users).
   ● For a single user, select Only for me (Dell Computer Corporation).
   사용자 지정 설정 화면이 표시됩니다.
6. 다음을 클릭하여 기본 디렉토리에 Dell Command | Configure CLI 및 GUI를 설치합니다. 기본 Dell Command | Configure 설치 디렉토리는 다음과 같습니다.
   ● For 32-bit systems, C:\Program Files\Dell\Command 구성.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command 구성.
   프로그램 설치 준비 화면이 표시됩니다.
7. 예를 클릭합니다.
   The Installing Dell Command | Configure screen is displayed. When the installation completes, the installation wizard- completed screen is displayed.
8. 마침을 클릭합니다.
   Dell 명령 | Configure GUI가 성공적으로 설치되고 GUI 바로 가기가 바탕 화면에 표시됩니다.

Install Dell Command | Configure using .msi file: Silent installation

You can seamlessly install Dell Command | Configure in silent mode using the .msi file, leveraging command-line parameters for efficient deployment.

메모: Dell Command | Configure silent mode installation supports installing the Dell Command Secure BIOS Configuration Server, but it does not support the Dell Command | Configure option.

메모: By default, during silent installation using the .msi file, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server. To install DCC with DCSBC server, use the following command: msiexec.exe /i Command_Configure.msi DCSBC=1 /qn

1. Dell Command | 구성 설치 프로그램은 DUP(Dell 업데이트 패키지)에서 추출됩니다.
2. Open Command Prompt as administrator.
3. 다음 명령을 실행합니다. msiexec.exe /i Command_Configure.msi /qn
   Dell 사령부 | Configure 구성 요소는 다음 위치에 자동으로 설치됩니다.
   ● For 32-bit systems, C:\Program Files\Dell\Command 구성.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command 구성.

지원되는 언어로 설치

To assess silent and unattended with supported languages, run the following command: msiexec /i Command_Configure.msi TRANSFORMS=1036.mst.

To specify the installation language, use the command-line option TRANSFORMS=<language ID>.mst, where <language ID> corresponds to one of the following:

• 1028 — 중국어 대만
• 1031 — 독일어
• 1033 — 영어
• 1034 — 스페인어
• 1036 — 프랑스어
• 1040 — 이탈리아어
• 1041 — 일본어
• 1043 — 네덜란드
• 2052 — 중국어 간체
• 3076 - 중국어 홍콩

메모: If the specified language or the default operating system language is not supported, the installation defaults to English.

Uninstalling Dell Command | Configure from Windows systems

To uninstall Dell Command | Configure, use the Control Panel to remove the application from Windows ensuring clean removal without affecting system settings.

1. 열기 제어판.
2. 이동하다 프로그램 > 프로그램 및 기능.
3. Find Dell Command | Configure 목록에 있습니다.
4. Right-click it and select 제거.
5. Follow the on-screen prompts to complete the uninstallation.

Upgrading Dell Command | Configure on Windows systems

You can upgrade Dell Command | Configure using a Dell Update Package (DUP) or the .msi file.

메모: Microsoft .NET Framework 8.0 or later must be installed on the client system to ensure a successful Dell Command | Configure user interface installation.

메모: If Windows User Account Control (UAC) is enabled on Windows 10 and 11 systems, you cannot install Dell Command | Configure in silent mode. Ensure that you have an administrative privilege before installing Dell Command | Configure in silent mode.

메모: This system does not have a WMI-ACPI compliant BIOS, so the limited functionality is available. Update the BIOS with a compatible version, if available. For more information, see Dell Command | Configure 5.x Release Notes at Support | Dell.

메모: You cannot install and upgrade Dell Command | Configure on non-WMI-ACPI in silent mode.

Upgrade Dell Command | Configure using DUP file

다음 단계를 수행하여 Dell Command | 다음 버전으로 구성(이전의 Dell Client Configuration Toolkit):

1. Double-click the downloaded DUP, and then click 설치하다.
   Dell 사령부 | 설치 구성 마법사가 시작됩니다.
2. 설치 마법사를 실행하고 화면에 표시된 지시를 따르세요.

Upgrade Dell Command | Configure using .msi file

To upgrade Dell Command | Configure, uninstall the existing version and install the new version using the .msi installer ensuring a clean upgrade with the latest features and fixes.

1. 최신 설치 다운로드 file Dell-Command-Configure-
   Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE from Support | Dell.
2. Extract the installation using any of the following:
   ● From the folder where you extracted the file, double-click the Dell_Command_Configure.msi file
   ● From the command prompt, browse to the directory where you extracted the file, 다음 명령을 실행합니다.
   msiexec.exe /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=VOMUS
   메모: 설치 마법사 화면이 표시된 후 “이전 버전의 Dell Command | 이 시스템에서 구성이 감지되었습니다. 계속하면 설치 프로그램이 이전 버전을 제거하고 최신 버전 설치를 진행합니다. 최신 버전의 설치를 취소하면 시스템이 이전 버전의 Dell Command | 구성합니다. 계속하시겠습니까?” 메시지.
3. 화면의 지시에 따라 업그레이드하십시오.
   메모: 자동 업그레이드의 경우 다음 명령을 실행합니다. msiexec /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=vmous REBOOT=REALLYSUPPRESS /qn
   NOTE: If a previous version of Dell Command | Configure is installed in a non-default directory, you cannot upgrade to the latest Dell Command | Configure version. In this case, uninstall the existing version and assess fresh installation of the latest version.

기본 폴더에서 업그레이드

To upgrade Dell Command | Configure, run a command from the extracted DUP folder to silently install the update in the default directory.

1. Dell Command | DUP(Dell Update Package)에서 설치 프로그램을 구성합니다.
2. 다음 명령을 실행합니다. msiexec.exe /i Command_Configure.msi /qn
   Dell 사령부 | Configure 구성 요소는 다음 위치에 자동으로 설치됩니다.
   ● For 32-bit systems, C:\Program Files (x86)\Dell\Command 구성.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command 구성.

Dell Command | Configure for Linux

This section provides details about the supported Linux versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Linux systems.

주제:

• Supported operating systems for Linux
• Supported Platforms for Linux
• Installing Dell Command | Configure on Linux systems
• Uninstalling Dell Command | Configure on Linux systems
• Upgrading Dell Command | Configure for systems running on Linux

Supported operating systems for Linux

표 4. 지원되는 운영 체제

Supported Platforms for Linux

Table 5. Supported platforms

메모: Platforms must support WMI-ACPI BIOS for full functionality.

메모: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell.

Installing Dell Command | Configure on Linux systems

To install Dell Command | Configure on Linux, download the appropriate .deb or .rpm package from Dell Support and use your package manager to install it enabling CLI-based BIOS configuration on supported Dell systems.

메모:

• Dell Command | Configure user interface is not supported on systems running the Linux operating system.
• Dell Command Secure BIOS Configuration(DCSBC) is not supported on systems running the Linux operating system.

You can install the Dell Command | Configure for Red Hat and Debian-based linux distributions, by following these steps:

1. Go to Support | Dell, download the tar.gz file.
2. 메모:
   ● If you have downloaded the package for Red Hat Enterprise Linux, the RPMs are included in the package.
   ● If you have downloaded the package for Ubuntu Desktop, the Debians are included in the package.

Install the RPMs or Debians as appropriate for your system.
기본 설치 경로는 /opt/dell/dcc입니다.

필수 조건

• 워크스테이션은 지원되는 Linux 운영 체제에서 실행되어야 합니다.
• Red Hat Enterprise Linux 1 및 Ubuntu Desktop 8에 Dell Command | Configure를 설치하고 실행하려면 openSSL 20.04.x 라이브러리를 다운로드하세요.
• Download openSSL 3.x libraries to install and run Dell Command | Configure on Red Hat Enterprise Linux 9, Ubuntu Desktop 22.04, and Ubuntu Desktop 24.04.

Install Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To install Dell Command | Configure on Red Hat Enterprise Linux 8 or 9, download the RPM package from Dell Support and install it using the command line.

1. 에서 dell.com/support, Download the command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz file from Support | Dell .
2. 압축 해제 file 다음 명령을 사용합니다:

tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz

To install Dell Command | Configure on systems running Red Hat Enterprise Linux 8 or 9 systems using 64-bit RPMs, run the commands in the following order:

rpm —ivh srvadmin-hapi-<version number>.el8.x86_64.rpm

rpm —ivh command-configure-<version number>-<Build Number>.<RHEL Version>.<architecture>.rpm

Installing Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04

To install Dell Command | Configure on supported Ubuntu versions, download the DEB package from Dell Support and install it using the command line. See Accessing Dell Command | Configure installer.

1. Download the command_configure-<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz from Support | Dell.
2. 압축 해제 file using the following command: tar -xvzf command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz
   The installer command-configure_<version><Build Number>.<Ubuntu
   버전>_ .tar.gz에는 다음 순서로 설치해야 하는 다음 패키지가 포함되어 있습니다.
   ● srvadmin-hapi_<version number>_amd64.deb
   ● command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
3. To install HAPI, run the following command: dpkg -i srvadmin-hapi_<version number>_amd64.deb
   메모: If the installation on Ubuntu fails due to dependency issues with libc, ensure that you upgrade the system by running the following command:
   apt-get -f 설치
4. To install Dell Command | Configure, run:
   dpkg -i command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
   기본 설치 경로는 /opt/dell/dcc입니다.
   메모: If the installation on Ubuntu fails due to dependency problems libc, then ensure to upgrade the system using apt-get upgrade command:
   apt-get -f 설치

Uninstalling Dell Command | Configure on Linux systems

To uninstall Dell Command | Configure on Linux, run the appropriate RPMs for your system to remove the installed package (rpm or deb) based on your distribution removing the application and its components.

메모: Uninstalling or upgrading Dell Command | Configure on systems running supported Linux operating systems leave empty files and folders on the system. These residual files and folders do not affect system functionality.

Uninstall Dell Command | Configure from Red Hat Enterprise Linux 8 and 9

Red Hat Enterprise Linux 8 또는 9를 실행하는 시스템에서 Dell Command | Configure를 제거하려면 다음 순서대로 명령을 실행하세요.

rpm -e command-configure-<version>-<build number>.el8/9.x86_64

rpm -e srvadmin-hapi- .el8.x86_64

Uninstall Dell Command | Configure from Ubuntu Desktop

You can uninstall Dell Command | Configure and dependent packages on systems running Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

메모: You must uninstall Dell Command | Configure before uninstalling the dependent packages.

1. Dell Command를 제거하려면 | 구성을 구성하고 제거하세요 files 및 임시 files, run the following command: dpkg –purge command-configure
2. Hapi를 제거하고 구성을 제거하려면 files 및 임시 files, run the following command: dpkg –purge srvadmin-hapi
3. To verify that the Dell Command | Configure is uninstalled in your system, run the following command: dpkg –l | grep command-configure
   If Dell Command | Configure details are not displayed, then the uninstallation is successful.

Upgrading Dell Command | Configure for systems running on Linux

You can upgrade Dell Command | Configure on Linux, uninstall the existing version and install the latest package.

1. Download the Dell Command | Configure .tar.gz file from Support | Dell and save it on your system.
2. 시스템에서 Dell Command | Configure 버전을 업그레이드합니다.

메모: Uninstalling and upgrading Dell Command | Configure on systems running supported Linux operating systems leaves empty file시스템의 s 및 폴더. files 및 폴더는 기능적으로 아무런 영향을 미치지 않습니다.

Upgrade Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To upgrade Dell Command | Configure on Red Hat Eenterprse Linux 8 or 9, uninstall the current version and install the latest RPM package.

1. Download the command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz file from Support | Dell.
2. 압축 해제 file using the following command: tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz

To upgrade Dell Command | Configure on computers running Red Hat Enterprise Linux 8 or 9 computers using 64-bit RPMs, run the commands in the following order:

rpm -Uvh –nodeps srvadmin-hapi- . .x86_64.rpm

rpm —Uvh command-configure-<version>-<build number>.<RHEL Version>.x86_64.rpm

Upgrade Dell Command | Configure on Ubuntu Desktop

To upgrade Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

1. Download the command_configure-linux-<version>-<build number>.tar.gz from Support | Dell.
2. 압축 해제 file using the following command: tar -zxvf command-configure_<version>-<build number>.<Ubuntu Version>_amd64.tar.gz
3. 업그레이드하려면 다음 명령을 실행하세요.
   dpkg -i srvadmin-hapi_<version number>_amd64.deb
   dpkg -i command-configure_<version>-<build number>.<Ubuntu Version>_amd64.deb
4. 현재 Dell Command | Configure 버전을 확인하려면 기본 설치 경로로 이동하여 다음을 실행하세요.
   ./cctk –version

Advanced Dell Command | Configure installation scenarios

이 장에서는 다음을 제공합니다.view of advanced installation scenarios for Dell Command | Configure, including secure BIOS configuration and installation in the Windows Preinstallation Environment (Windows PE). These scenarios ensure robust system management and deployment capabilities.

주제:

• Installing Dell Command | Configure for Dell Command Secure BIOS Configuration
• Dell Command | Configure for Windows Pre installation Environment.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration

Hardware Security Module (HSM) is used as a signing method for the Dell Command Secure BIOS Configuration workflow.

메모: Dell Command Secure BIOS Configuration(DCSBC) is not compatible with ARM64-bit systems.

필수 조건

Dell Command Secure BIOS Configuration with Dell Command | Configure allows you to use any Hardware Security Module vendor to sign the Dell Command Secure BIOS Configuration Server 탑재물.

다음 요구 사항이 충족되는지 확인합니다.

• HSM Setup and OpenSSL: Ensure that you have set up your Hardware Security Module (HSM) provider in your environment. It is recommended to use OpenSSL as the open-source signing tool to generate signatures, which can then be used by Dell Command | Configure.
• Update HSMSigning.bat File: You must update the HSMSigning.bat file with a command compatible with your HSM setup. This file is at: C:\Program Files (x86)\Dell\Command Configure\X86_64\HSMSigning.bat. Modify the signature generation command in line 12 according to your HSM provider requirements. The default command is: “%OpensslPath%\openssl.exe” dgst -sha256 -sign “%ObfuscatedKeyPath%\%PrivateKeyName%” -out “%outlocat%\blobsignature.txt” %1 . Ensure that the command you provide generates the signature in the same path as specified in the default command, with the filename set as blobsignature.txt. Do not modify the last option %1, as it allows the signature command to accept the payload file that is generated by Dell Command | Configure during runtime for signing.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration Server

To install Dell Command | Configure for use with the Secure BIOS Configuration Server, download the appropriate installer package and follow the setup instructions to enable remote BIOS configuration and policy enforcement.

1. Run Command_Configure.msi from Power Shell in administrator mode.
   설치 마법사가 표시됩니다.
2. Select the Dell Command Secure Bios Configuration Server option.
3. 다음을 클릭하세요.
4. 설치를 시작하려면 설치를 클릭하세요.
   The installation completion wizard is displayed.
5. 마침을 클릭하여 설치를 완료합니다.
   The Dell Secure Configuration Service is created and initiated in the Windows Services tab.
   메모: To run Dell Secure Configuration on a particular port, the port must be updated to the appsettings.json file 에서 URL line. Locate the following path: C:\Program Files (x86)\Dell\Command Configure\ABIWindowsService\appsettings.json.
   메모: The start time for Dell Command Secure BIOS Configuration varies depending on the platforms—the maximum time limit is set to 2-3 minutes.

Configuring the Dell Command Secure BIOS Configuration Server using HTTPS

The Dell Command | Configure installer configures the Dell Command Secure BIOS Configuration Server for HTTP calls. For added security, you can also configure the Dell Command Secure BIOS Configuration Server using HTTPS on the system where Dell Command Secure BIOS Configuration is installed, by following these steps:

1. Press the Windows key and press the R key to launch the Run dialog box.
2. Type Services.msc and then press Enter to open Windows Services.
3. Locate Dell Secure Configuration Service.
4. Right-click Dell Secure Configuration Service, and click Stop.
5. Go to the Dell Command | Configure installation path C:\Program Files (x86)\Dell\Command
   Configure\ABIWindowsService\appsettings.json, and modify the appsettings.json file 다음과 같은 사항 포함:
   {
   “Logging”: {
   “LogLevel”: {
   “Default”: “Information”,
   “Microsoft.Hosting.Lifetime”: “Information”
   }
   },
   “Kestrel”: {
   “Endpoints”: {
   “HttpsInlineCertFile”: {
   “Url”: “< URL:Port>”,
   “ClientCertificateMode”: “AllowCertificate”,
   “Certificate”: {
   “Path”: “<Https certificate complete path>”,
   “Password”: “<Https Cert Password>”
   }
   }
   }
   }
   }
   메모: The certificate to be provided must be associated to the Url specified in the same field. Also, specify the Client Certificate Modeas Allow Certificate to allow Dell Command Secure BIOS Configuration server to function without any issues. You must specify the complete Path for the Https certificate and the Password for authenticating the Https Certificate. The Password can be left empty if the Https certificate does not require a password authentication.
6. Save changes to the appsettings.json file and start the Dell Secure Configuration Service from Windows Services.
   메모: There are other ways as well to configure an HTTPS Server. For more details, see Configure endpoints for the ASP.NET Core Kestrel web server and Client Certificate Mode Enum.

Dell Command | Configure for Windows Preinstallation Environment

Windows Preinstallation Environment (WinPe) provides a stand-alone preinstallation environment that is used to prepare a system for Windows installation. For client systems that do not have an operating system that is installed, you can create a bootable image that contains Dell Command | Configure to run the Dell Command | Configure commands on Windows PE. To create Windows PE 10.0, and Windows PE 11.0 images, you can use Windows Assessment and Deployment Kit (Windows ADK).

Using Windows PE 10.0, and Windows PE 11.0, you can integrate Dell Command | Configure.

메모: Dell Command | Configure 5.x for Windows Preinstallation Environment is not compatible with ARM64-bit systems.

Windows PE 10.0 및 11.0을 사용하여 부팅 가능한 이미지 사전 설치 환경 만들기

To create a bootable image using Windows PE 10.0 or 11.0, use the Windows ADK to generate a customized Windows PE environment, then add the necessary tools and drivers before creating a bootable ISO or USB. This environment supports preinstallation tasks such as BIOS configuration and OS deployment.

1. 마이크로소프트에서 web사이트에서 클라이언트 시스템에 Windows ADK를 다운로드하고 설치합니다.
   메모: 선택 만 설치하는 동안 배포 도구 그리고 윈도우 Preinstallation Environment (Windows PE).
2. From Support | Dell, download and install Dell Command | Configure.
3. Dell 명령 설치 | 구성합니다.
4. Dell Command 통합 | 디렉토리 구조를 ISO로 구성 file 부팅 가능한 ISO 이미지를 생성합니다.

Dell Command 통합 | 디렉토리 구조를 ISO로 구성 file using Windows PE 10.0/11.0

To integrate the Dell Command | Configure directory into an ISO, copy it to the Windows PE working folder and create the Windows PE 10.0/11.0 image.

1. Windows 11 운영 체제를 설치합니다.
2. Download and install Windows ADK for Windows 10/11 operating system.
3. Create a Windows PE 10.0/11.0 image.

Creating a Windows PE 10.0/11.0 image

1. Browse to the following location:.
   ● For 32-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86.
   ● For 64-bit systems, C:\Program Files(x86)\Dell\Command 구성\X86_64.
2. 관리자 권한으로 명령 프롬프트를 엽니 다.
3. Run the following command: .
   ● Windows PE 10.0
   ○ For 32-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   ● Windows PE 11.0
   ○ For 32-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   메모: 명령에 사용된 경로가 Dell Command | 폴더를 구성합니다.
4. Copy the ISO image to the following location:
   ● For 32-bit systems, C:\winpe_x86\WIM.
   ● For 64-bit systems, C:\winpe_x86_64\WIM.

리소스 및 지원

제품을 선택하여 필요한 문서에 액세스할 수 있습니다.

1. 이동하다 지원 | Dell.
2. 딸깍 하는 소리 모든 제품을 탐색해보세요.
3. 딸깍 하는 소리 Software & Solutions.
4. 딸깍 하는 소리 클라이언트 시스템 관리.
5. 딸깍 하는 소리 Dell Command | Configure.
6. 딸깍 하는 소리 이 제품을 선택하세요.
7. 에게 view 필요한 문서를 보려면 필요한 제품 이름과 버전 번호를 클릭하십시오.

메모: 인터넷에 연결되어 있지 않은 경우 구매 송장, 포장 명세서, 청구서 또는 Dell 제품 카탈로그에 대한 연락처 정보를 찾을 수 있습니다.

Dell은 여러 가지 온라인 및 전화 기반 지원 및 서비스 옵션을 제공합니다. 가용성은 국가 또는 지역 및 제품에 따라 다르며 일부 서비스는 해당 지역에서 제공되지 않을 수 있습니다. 판매, 기술 지원 또는 고객 서비스 문제에 대해 Dell에 문의하려면 다음을 수행하십시오.

1. 지원으로 이동 | 작은 골짜기.
2. 지원 카테고리를 선택하세요.
3. 국가 또는 지역을 확인하십시오. 국가/지역 선택 페이지 하단의 드롭다운 목록.
4. 귀하의 요구 사항에 따라 적절한 서비스나 지원 링크를 선택하세요.

문서 / 리소스

DELL Command Configure Software [PDF 파일] 사용자 매뉴얼 Command Configure Software, Configure Software, Software

참고문헌

• 사용자 설명서