📘 디지털 매뉴얼 • 무료 온라인 PDF
DIGITALas 로고

DIGITALas 매뉴얼 및 사용자 가이드

DIGITALas is a Lithuanian manufacturer specializing in security and access control systems, including smart locks, gate automation, and GSM control modules.

팁: 정확한 제품 확인을 위해 DIGITALas 라벨에 인쇄된 전체 모델 번호를 포함해 주세요.

DIGITALas 매뉴얼에 대하여 Manuals.plus

JSC DIGITALas is a European technology manufacturer established in 2000 and based in Lithuania. The company specializes in the development and production of security, automation, and access control systems.

Their product lineup includes smart digital locks compatible with the Tuya ecosystem, GSM gate control modules under the 'DiTeL' line, wireless sensor buttons, infrared safety beams, and various gate opening mechanisms. DIGITALas focuses on providing innovative and reliable electronic solutions for both residential and commercial entry management.

디지털 매뉴얼

최신 매뉴얼 manuals+ 이 브랜드를 위해 큐레이션되었습니다.

DIGITALas A260 Tuya Smart Digital Lock User Manual

25년 2026월 XNUMX일
DIGITALas A260 Tuya Smart Digital Lock Product Usage Instructions The Smart Digital Lock is equipped with various unlock methods, including IC Card, Password, Manual Key, APP, and Fingerprint. It supports…

DIGITALas MS-582 반사경이 있는 광전지 사용 설명서

19년 2024월 XNUMX일
반사경이 장착된 Di-IR900 광전지는 다음과 같은 특징을 갖습니다. 강력한 햇빛 간섭 저항성으로 100,000럭스에 도달합니다. 장거리 감지를 위한 첨단 광학 기술. 최고 수준의 전자기 호환성으로 전자기 간섭에 대한 강력한 저항성을 제공합니다.

DIGITALas JD-07 LED 신호 Lamp 사용 설명서

25년 2024월 XNUMX일
DIGITALas JD-07 LED 신호 Lamp LED 점멸 작동 설명서 주요 기술 사양: 제품 설치 조건: 본 제품은 실내 또는 실외에서 사용 가능합니다. 설치 표면은…

DIGITALas support FAQ

이 브랜드의 매뉴얼, 등록, 지원에 대한 일반적인 질문입니다.

  • How do I reset the DIGITALas A260 Smart Lock to factory settings?

    Press and hold the Reset button on the back of the rear panel for 5 seconds until you hear a sound tip; the lock will then be in factory state and the default password is usually 123456.

  • What app is used for DIGITALas smart locks?

    The DIGITALas A260 and similar smart locks typically use the Tuya Smart or Smart Life App (available on iOS and Android) for Wi-Fi configuration and remote management.

  • How do I clear all transmitters from the DE-W1PA wireless button?

    Long-press the learning button on the control panel for approximately 10 seconds. The indicator light will turn red and then green, indicating that all transmitters have been cleared.

  • What is the power requirement for the a DiTeL GSM Gate module?

    The DiTeL GSM Gate module generally requires a DC supply voltage of 11-14V with a source capable of providing short-term peak currents.

  • Why is the LED not lighting up on my HW-08 safety sensor?

    If the receiver LED is off, the beams are aligned correctly. If the LED is on, the beams are not aligned or the path is obstructed. Ensure the transmitter and receiver are aligned and power is connected.