Australian specialist in electric underfloor heating systems, providing heating kits, thermostats, and controllers for residential and commercial flooring.
콜드버스터 is a prominent Australian brand specializing in electric underfloor heating solutions designed for ease of installation and energy efficiency. Known for their DIY-friendly kits, COLDBUSTER offers a wide range of products including under-tile, in-screed, and under-carpet heating systems suitable for various floor types.
In addition to heating elements, the brand manufacturers advanced digital thermostats and controllers that allow precise temperature management and scheduling, ensuring optimal comfort and reduced energy costs. COLDBUSTER supports its product line with comprehensive installation guides and technical support services to assist both professional installers and homeowners.
최신 매뉴얼 manuals+ 이 브랜드를 위해 큐레이션되었습니다.
이 브랜드의 매뉴얼, 등록, 지원에 대한 일반적인 질문입니다.
No, you must never cut the heating element wire itself. You may only cut the mesh backing or tape to adjust the layout of the mat, but the resistance wire must remain intact to function correctly and safely.
E1 typically indicates an internal sensor error within the thermostat, while E2 indicates an issue with the external floor sensor (either disconnected or damaged). Check connections or contact support if the error persists.
Yes, all COLDBUSTER heater elements must be connected to a circuit protected by a Residual Current Device (RCD) to ensure safety and compliance with electrical standards.
The floor sensor should be installed inside a conduit, centered between two runs of the heating element. It should not touch the heating wires directly to ensure an accurate temperature reading.
The thermostat is generally maintenance-free. Ensure air vents are kept clean and unobstructed. Clean the device only with a dry cloth.