
리모컨
충수

Art. No. 4301004301 – 4301005400 – 4301005500


REMOTE CONTROLLER APPENDIX
원격 제어 지침
The remote control uses two AAA LR03 1.5V batteries. The remote control is on automatic standby mode when not in use. Normally the batteries can be used for more then six months. The batteries can be replaced by the same type.
메모리 기능
난amps will remember the last setting before being swiched off and continue in that setting when switched back on.
원격 제어 기능
- Press the button to turn lamp켜짐 또는 꺼짐.
- Press to toggle between two brightness modes: 30% and 100%.
- Press the button to increase the lamp밝기.
- Press the button to reduce the lamp밝기.
- Timer function: Press the 1-hour timer button (the indicator light turns dark blue) and the lamps will turn off after 1 hour.
- Timer function: Press the 2-hour timer button (the indicator light turns light blue) and the lamps will turn off after 2 hours.
- To replace the batteries, slide back the cover of the battery compartment to access them.
문서 / 리소스
![]() | 4301004301 Remote Controller Appendix |
참고문헌
- 사용자 설명서manual.tools
게시일: 2026년 3월 24일
Updated: May 2, 2026
