AXIS CP11W Window Camera
위에view
The InstaVision AI Window Camera installs via a magnetic tile connection, then is configured in the InstaVision app for Bluetooth-based device discovery and Wi‑Fi connectivity so you can view 라이브 카메라 피드.
명세서
| Wi‑Fi band support | 2.4 GHz and 5 GHz (Wi‑Fi) |
| 리셋 버튼 | Long press 5 seconds to restore factory settings (device gives a voice prompt) |
| TF 카드 슬롯 | Micro TF card (for video storage and playback) |
| 힘 | 전원 입력 |
| 블루투스 검색 | Required for device discovery via BLE |
Quick Setup & Use
- Install the ceramic (porcelain) tile: tear off the surface paper, paste the tile at the appropriate window position, ensure it is firmly attached and flat, and make sure the side with the magnetic ring faces into the room.
- Connect the camera: bring the camera’s magnetic-ring side close to the tile’s magnetic ring and complete connection via magnetic adsorption; ensure the camera is firmly installed and angled as required.
- Install the InstaVision app on your iPhone/Android.
- Open the app, register or log in, then go to Home Page > Add Camera and follow the preparation instructions to power on the camera properly.
- Enable Bluetooth access when prompted (required for discovery via BLE). If the device is not found, long press the reset button for 5 seconds to restore factory settings and try again.
- Connect to Wi‑Fi: select a nearby 2.4 GHz & 5 GHz Wi‑Fi network, enter the password, and wait for connection confirmation sound.
- Open the main interface to view 살다 View (live camera feed).
인터페이스 설명
1. 리셋 버튼
2. TF 카드 슬롯
3. 전원 공급
The working state of the device, long press
5 seconds to restore the factory settings,
the camera will have a voice prompt
방송.
Micro TF card, storage video and playback
동영상.
전원 입력
This manual is suitable for various types of cameras
(The appearance may be different due to different batches, The
details are subiect to the receipt-This manual is only for the
installation instructions of this series of equipment)
설치 및 배치
A1 Window Camera
1. Preparation: Make sure you have prepared this tile and the
supporting camera.
2. Porcelain tile installation: carefully tear off the centrifugal paper on
the surface of the porcelain tile, pay attention to avoid touching the
adhesive surface. Paste the porcelain tile in the appropriate position
of the window, make sure that it is firmly pasted and the surface is
flat. Make sure that the side of the tile with the magnetic ring is facing
towards the room when pasting.
3. Camera Connection: Take out the camera, put the side corresponding
to the magnetic ring close to the magnetic ring of the ceramic tile, and
complete the connection through magnetic adsorption. Ensure that the
camera is firmly installed and the position angle meets the requirements
유용함.
앱 설치
1. Download and Install: Download and install the
InstaVision app by scanning the QRcode for the Appl
Store or Google play Store.
2. Account Registration: Open the app and register a new
account or log in to an existing account.
5. Add Camera: Navigate to the Home Page within the app.
Locate and select “Add Camera” then go through preparation
instructions to power on your camera properly,
access, which is required for device discovery. Do not skip this step.Ensn
Bluetooth access is enabled as instructed, allowing the app to discover
device via BCE,
to cn SLsto=th
* If you can’t find the device in the above steps, press and hold tt
reset button for 5 seconds, restore the camera to factory settin
다시 시도해 보세요.
5. Connect to Wi-Fi: The app Will automatically scan for nearby
2.4 GHz & 5 GHz Wi-Fi routers.Choose your desired Wi-Fi
network from the list provided. Please double-check your
Camera’s capability in terms of 2.4 GHz & 5 GHZ.
A1 Camera use Instruction video
If you need further assistance, please contact our customer
support team. You can send an email or call customer service
through the “Contact Us” page within the app.
Thank you for choosing InstaVision App. We are committed to
providing the best user experience and security protection. If
you have any suggestions or feedback, please feel free to
문의해주세요.
추가 도움이 필요하면 고객 지원팀에 문의하세요.
참고: 이 장비는 테스트를 거쳐 제한 사항을 준수하는 것으로 확인되었습니다.
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
유해한 간섭으로부터 합리적인 보호를 제공하도록 설계되었습니다.
주거 시설에서. 이 장비는 생성, 사용 및 방출 할 수 있습니다.
무선 주파수 에너지 및 해당 규정에 따라 설치 및 사용되지 않는 경우
지시사항에 따라 무선 통신에 유해한 간섭을 일으킬 수 있습니다.
그러나 특정 지역에서 간섭이 발생하지 않는다는 보장은 없습니다.
설치. 이 장비가 라디오 또는
television reception, which can be determined by turning the equipment Off
그리고 사용자는 간섭을 수정하려고 시도하는 것이 좋습니다.
다음 중 더 많은 조치:
— 수신 안테나의 방향을 바꾸거나 위치를 바꾸세요.
— 장비와 수신기 사이의 거리를 넓힙니다.
— Connect the equipment into an outlet on o circuit different from that
수신기가 연결된 곳.
— 도움이 필요하면 딜러나 숙련된 라디오/TV 기술자에게 문의하세요.
Important: Change or modifications not expressly approved by the
규정 준수에 대한 책임이 있는 제조업체는 사용자의 권한을 무효화할 수 있습니다.
장비를 작동시킵니다.
이 장치는 FCC 규정의 15부를 준수합니다. 작동은 다음과 같습니다.
다음 두 조건에 따라:
(1) 본 장치는 유해한 간섭을 일으키지 않아야 하며,
(2) 이 장치는 간섭을 포함하여 수신된 모든 간섭을 수용해야 합니다.
원치 않는 작동이 발생할 수 있습니다.
문서 / 리소스
 | CP11W Window Camera |
참고문헌
- apps.apple.com/in/app/instavision-smart-safe-home/id6479250008앱스.애플.com
- 사용자 설명서manual.tools