AudioThing 910-42 Echo Cube Effect Plugin User Guide

AudioThing 910-42 Echo Cube Effect Plugin User Guide

AudioThing 910-42 Echo Cube Effect Plugin User Guide

AudioThing 910-42 Echo Cube Effect Plugin - front page

Echo Cube

Dual Acoustic Delay Line

Echo Cube is a dual delay plugin inspired by the Cooper Time Cube, a rare analog delay system that achieved echo without tape or electronic delay circuits scush as BBDs. The original unit created delay by sending audio through long coiled tubes, where time was defined by the physical propagation of sound through air.

Echo Cube recreates and expand this concept with two independent delay lines, A and B, each offering dedicated time, feedback, and level controls. Three models are available: Time Cube faithfully recreates the original hardware, while 정원 호스 그리고 골판지 are experimental, DIY inspired variations designed for sound design, expanding on the physical principles of the original unit.

The delay lines can be combined using multiple routing modes, including serial, parallel, ping pong, mono sum, and mid side, allowing precise control over delay interaction and stereo image shaping.

Echo Cube is available for macOS, Windows, and Linux (VST, VST3, AU, AAX, CLAP).

iOS 및 iPadOS(AUv3 및 Standalone)용 App Store에서도 이용할 수 있습니다.

설치

맥 OS
  • DMG 아카이브를 두 번 클릭하여 압축을 풉니다.
  • PKG 설치 프로그램을 마우스 오른쪽 버튼으로 클릭하고 열기를 클릭합니다.
  • 지침에 따라 플러그인 설치
윈도우
  • ZIP 아카이브 추출
  • 설정을 두 번 클릭하십시오. file (.exe)
  • 지침에 따라 플러그인 설치
리눅스
  • tarball 아카이브 추출
  • ./install.sh를 실행합니다.
  • 지침에 따라 플러그인 설치

등록

When you open the plugin for the first time, the activation window will appear automatically. If it does not appear, open it by clicking the ☰ icon next to the bypass button in the top right corner of the plugin.

AudioThing 910-42 Echo Cube Effect Plugin - login page

온라인
  • 아직 계정을 만들지 않았다면 다음을 수행할 수 있습니다. 여기에서 가입하세요
  • Enter your email and password and click Log In.
오프라인
  • 라이선스 다운로드 file 당신의 계정.
  • Drag and drop the license file into the registration window, or click the offline license file label below Log In to select the license file.

매개변수

주인

입력: Sets the input gain before processing. Use it to optimize the signal level into the delays.
혼합: Blends the processed signal with the dry input signal.
산출: Controls the final output level after processing. Useful for gain matching.

모델: Selects one of three physical delay models available:
● Time Cube, the original Time Cube design.
● Garden Hose, long flexible tubing similar to the Time Cube.
● Corrugated, corrugated plastic piping for cabling.
하이패스 Applies a highpass filter to the input signal before the delays.
운전하다 Adds soft saturation to the input signal.

Delays (A/B)
우회로 Enables or disables the delay channel.
시간 Sets the delay time for the line.
↳ 동기화 Synchronizes the delay time to the host tempo.
피드백 Controls how much of the delayed signal is fed back into the delay line.
Higher values produce longer repeats and self oscillation.
용량 Sets the output level of the delay line before routing.

추가의 (character controls)

AudioThing 910-42 Echo Cube Effect Plugin - Extra (character controls)

Adjusts the internal resonance of the delay line. This emphasizes or smooths harmonic buildup, simulating the classic comb filtering happening in the unit.

소음 Adds background noise into the delay path. This recreates the instability and texture of physical delay systems.
↳ Env When the enabled, the noise follows the input signal: it only activates when audio is present.
Phase Inverts the polarity of the delay line output. This affects how the two delay lines interact, especially in parallel, mid/side, and feedback heavy setups.

라우팅

신호 흐름
Shows the current signal flow between delay lines A and B and the stereo channels. Five modes are available:

  • Serial, chains lines A and B together to create longer delay times and more complex repeats.
  • Parallel, lines A and B process the input signal independently. Their outputs are mixed together at the end.
  • Ping Pong, Routes the left channel into delay line A and the right channel into delay line B, then cross feeds the outputs back to the opposite channels.
  • Mono Sum, the input signal is summed to mono before entering the delay lines, then processed through the serial routing path.
  • Mid/Side, splits the input into mid and side components, processes them separately through delay lines A and B, then converts the signal back to stereo.

Send When disabled, no new signal enters the delay lines, but existing feedback continues to be heard until it naturally decays.
Direct Controls whether the dry signal is passed directly to the output. Useful for creating wet only delay effects. Independent of the Mix parameter.
소프트 클립 Enables a soft clipping stage on the delay output. This limits peaks in a smooth way and helps keep feedback under control at extreme settings.

특징

매개변수 잠금

AudioThing 910-42 Echo Cube Effect Plugin - Parameter Lock

프리셋을 변경하는 동안 또는 랜덤마이저 버튼을 사용할 때 하나 이상의 매개변수 값을 유지하려면 매개변수 잠금 기능을 사용할 수 있습니다.
매개변수를 마우스 오른쪽 버튼으로 클릭하고 매개변수 잠금을 선택합니다.

값 편집

AudioThing 910-42 Echo Cube Effect Plugin - Edit Value
노브와 슬라이더의 값을 수동으로 변경할 수도 있습니다. 매개변수를 마우스 오른쪽 버튼으로 클릭하고 '값 편집'을 선택하세요. Shift 키를 누른 채 클릭해서도 이 기능을 사용할 수 있습니다.

By clicking on the icon ☰ you can access additional features.

창 크기

미리 정의된 세 가지 크기(소형, 표준, 대형)를 사용하여 플러그인 창의 크기를 조정할 수 있습니다. 인터페이스의 오른쪽 하단 모서리를 클릭하고 드래그하여 플러그인 창의 크기를 조정할 수도 있습니다. 두 번 클릭하면 표준 크기로 재설정됩니다.

사전 설정 복사/붙여넣기

이 복사/붙여넣기 기능을 사용하여 사전 설정을 쉽게 공유할 수 있습니다.
Copy to Clipboard: 모든 매개변수의 상태는 클립보드에 저장됩니다.
Paste from Clipboard: 클립보드에서 사전 설정 로드

알림 활성화/비활성화

업데이트 및 뉴스에 대한 알림을 활성화하거나 비활성화할 수 있습니다(종 모양 아이콘으로 표시). 이 옵션은 전역적이며 모든 AudioThing에 영향을 미칩니다. plugins.

마우스 버튼 교체

If you are using the right button as your primary mouse button, the plugin might not recognize it. Use this option to enable it internally in the plugin.
This option is global and it will affect all AudioThing plugins.

GUI 가속

시스템에서 지원하는 GUI 가속을 활성화하거나 비활성화할 수 있습니다.
현재 기본 라이브러리는 OpenGL입니다.

그래픽 컨트롤

이 기능을 사용하면 사용자 인터페이스의 밝기와 대비를 수정할 수 있습니다.

모든 것이 어디에 있나요?

설치 프로그램이 plugins, 사전 설정 및 기타 데이터가 이 폴더에 있습니다.

맥 OS
호주: /라이브러리/오디오/플러그인/구성 요소/
한국어: /라이브러리/오디오/플러그인/VST/
VST3: /라이브러리/오디오/플러그인/VST3/
박수: /라이브러리/오디오/플러그인/박수/
AAX: /라이브러리/애플리케이션 지원/Avid/오디오/플러그인/
데이터: /사용자/공유/AudioThing/

윈도우
한국어: 설치 프로그램의 사용자 지정 경로
VST3: \프로그램 Files\공통 Files\VST3\
박수: \프로그램 Files\공통 File박수
AAX: \프로그램 Files\공통 Files\Avid\오디오\플러그인\
데이터: \Users\Public\Public Documents\AudioThing\

크레딧
DSP 및 코드 카를로 카스텔라노
Design John Gordon
QA 데이비드

최종 사용자 사용권 계약
방문해주세요 www.audiothing.net/eula/ 다시view 이 제품의 EULA.

감사합니다
구입 주셔서 감사합니다! 우리가 이 제품을 만들었던 것처럼 여러분도 그것을 사용하는 것이 재미있기를 바랍니다.
지원은 여기를 방문하세요. www.audiothing.net/support/
추가 도움이나 질문이 있으시면 여기로 문의해 주세요. www.audiothing.net/contact/

우리를 따르세요

AudioThing 910-42 Echo Cube Effect Plugin - social mrddle icon
https://www.audiothing.net/
https://www.instagram.com/audiothing/
https://bsky.app/profile/audiothing.net
https://www.youtube.com/@audiothing

문서 / 리소스

PDF thumbnail910-42 Echo Cube Effect Plugin
User Guide · 910-42, 910-42 Echo Cube Effect Plugin, Echo Cube Effect Plugin, Cube Effect Plugin

참고문헌

질문하기

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

질문하기

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.