ANCEL DS500 Elite OBD2 Scanner and BT310 Battery Tester User Manual

1. 서론

This manual provides detailed instructions for the ANCEL DS500 Elite Bidirectional Scan Tool and the ANCEL BT310 12V/24V Car Battery Tester. Please read this manual thoroughly before operating the devices to ensure correct usage and optimal performance. Keep this manual for future reference.

2. 제품 오버view

2.1 ANCEL DS500 Elite Bidirectional Scan Tool

The ANCEL DS500 Elite is an advanced diagnostic scan tool designed for comprehensive vehicle system analysis. It features bidirectional control capabilities, allowing users to send commands to vehicle modules and monitor system responses. This tool supports full-system deep scans and offers over 3,000 active test commands.

양방향 제어: Perform active tests on various components like fuel pumps, cooling fans, windows, and mirrors.
Full System Deep Scan: Uncover critical data from every module and sensor, including Engine, ABS, Airbag, Transmission, TPMS, SAS, ESP, BCM, HVAC, EBS, and ACM.
Hot Reset Service: Access over 28 maintenance reset functions for various car brands, including D-P-F Regeneration, AdBlue Reset, Oil Life Reset, EGR Adaptation, IMMO Reset, Gear Learning, Battery Matching, SAS Calibration, A/F Ratio/Fuel Reset, ABS Bleeding, Air Suspension Reset, NOx Sensor Reset, AFS Reset, ETA Reset, Coolant Pump Activation, Brake-pad Reset, Seat Calibration, and Airbag Reset.
평생 무료 업데이트: Ensures compatibility with evolving vehicle diagnostic systems without subscription fees.

ANCEL DS500 Elite performing bidirectional control tests on various car components. — Image: ANCEL DS500 Elite demonstrating bidirectional control functions, including fuel injector test, window control, rearview mirror control, and light control. The device shows an 'OK Activated' status for a command and an 'ERROR No Response' for another, illustrating its diagnostic capabilities.

ANCEL DS500 Elite displaying various hot reset service functions. — Image: The ANCEL DS500 Elite interface showcasing over 28 hot reset service functions, such as D-P-F Regeneration, AdBlue Reset, Oil Life Reset, EGR Adaptation, IMMO Reset, Gear Learning, Battery Matching, and SAS Calibration, indicating its comprehensive maintenance capabilities.

ANCEL DS500 Elite performing a full system deep scan. — Image: A visual representation of the ANCEL DS500 Elite performing a full system deep scan, highlighting its ability to access critical data from various modules and sensors like I.M.M.O.bilizer, SAS, ESP, BCM, HVAC, EBS, and ACM, along with functions like Read Codes, Erase Code, View Freeze Frame, Live Data, I/M Readiness, and Evap Leak Test.

2.2 ANCEL BT310 12V/24V Car Battery Tester

The ANCEL BT310 is a versatile battery load tester compatible with both 12V and 24V battery systems. It supports various battery types and provides accurate health assessments, cranking tests, and charging tests.

보편적 인 호환성 : Supports 12V and 24V Lithium and Lead-Acid batteries, including Flooded, AGM (Spiral & Flat Plate), GEL, and EFB types.
Multiple Standards: Compatible with major battery standards such as CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB.
Key Diagnostics: Measures State of Charge (SOC), State of Health (SOH), Voltage Test, Rated and Measured CCA, and Internal Resistance.
테스트 결과: Provides clear results: [GOOD BATTERY], [GOOD-RECHARGE], [CHARGE & RETEST], [REPLACE BATTERY], and [BAD CELL-REPLACE].

ANCEL BT310 battery tester showing compatibility with various battery types and vehicles. — Image: The ANCEL BT310 battery tester highlighting its compatibility with different battery types (Flooded, AGM, EFB, GEL, Lithium-Ion) and various vehicles such as ATVs, boats, cars, SUVs, pickups, and motorcycles, emphasizing its broad application.

3. 설정

3.1 ANCEL DS500 Elite Setup

전원 켜기: Connect the DS500 Elite to the vehicle's OBD-II port. The device will power on automatically.
초기 구성: Follow the on-screen prompts to select language, time zone, and Wi-Fi connection.
소프트웨어 업데이트: Ensure the device is connected to Wi-Fi and check for available software updates to maintain optimal performance and vehicle compatibility.

3.2 ANCEL BT310 Setup

배터리에 연결: Ensure the vehicle engine is off. Connect the red clamp 배터리의 양극(+) 단자와 검정색 cl에 연결하세요.amp (-) 단자에.
전원 켜기: The BT310 will power on automatically once connected to the battery.
배터리 유형 선택: Use the navigation buttons to select the correct battery type (e.g., Flooded, AGM, GEL, EFB, Lithium) and standard (e.g., CCA, BCI) as prompted on the screen.

ANCEL BT310 battery tester connected to a car battery for testing. — Image: The ANCEL BT310 battery tester connected to a car battery, illustrating the proper setup for testing. The image also highlights the device's 12V and 24V compatibility and its 100-2000 CCA testing range.

4. 사용 설명서

4.1 ANCEL DS500 Elite Operation

차량 연결: Plug the OBD-II cable into the vehicle's diagnostic port, usually located under the dashboard.
차량 식별: The DS500 Elite will automatically detect the vehicle's VIN or prompt you to manually enter vehicle information (make, model, year).
진단 메뉴: Navigate the main menu to select desired functions:
- 진단: Perform full system scans, read/clear fault codes, view live data streams, and check I/M readiness.
- 활성 테스트: Select specific control modules and components to perform bidirectional tests (e.g., activate ABS pump, cycle cooling fan).
- 서비스: Access various reset and maintenance functions (e.g., Oil Reset, EPB Reset, SAS Calibration).
- 업데이트: 소프트웨어 업데이트를 확인하고 설치하세요.
데이터 재view: After performing tests, review the diagnostic reports, freeze frame data, and live data graphs on the device screen.

4.2 ANCEL BT310 Operation

메인 메뉴: Once powered on, the BT310 will display the main menu with options like 'Battery Test', 'Cranking Test', 'Charging Test', and 'Review Data'.
배터리 테스트: Select 'Battery Test'. The device will prompt you to enter the battery's rated CCA (Cold Cranking Amps) or other standard values. Follow the on-screen instructions. The test will provide results such as SOC, SOH, Voltage, Measured CCA, and Internal Resistance, along with a clear status (e.g., GOOD BATTERY, REPLACE BATTERY).
크랭킹 테스트: Select 'Cranking Test'. The device will instruct you to start the vehicle. It will then measure the cranking voltage and time, providing an assessment of the starter system's performance.
충전 테스트: Select 'Charging Test'. The device will instruct you to run the engine at idle and then at a higher RPM (e.g., 2500 RPM). It will measure the alternator's output voltage and ripple, assessing the charging system's efficiency.
Review 데이터: Select 'Review Data' to view 이전에 저장된 테스트 결과입니다.

ANCEL BT310 displaying battery health results. — Image: The ANCEL BT310 battery tester screen showing detailed battery health metrics including Health, Charge, Voltage, Internal Resistance, and a 'GOOD BATTERY' status. It also illustrates the five possible battery health results: Good Battery, Good-Recharge, Charge & Retest, Replace Battery, and Bad Cell-Replace.

ANCEL BT310 performing cranking and charging tests. — Image: The ANCEL BT310 battery tester displaying results for both Cranking Test (Time, Voltage) and Charging Test (Unloaded, Loaded, Ripple), indicating 'CRANKING NORMAL' and 'VOLTAGE NORMAL' statuses, demonstrating its ability to assess the vehicle's starting and charging systems.

5. 유지관리

청소: Use a soft, dry cloth to clean the device screens and bodies. Avoid using abrasive cleaners or solvents.
저장: 두 기기 모두 직사광선과 극한 온도 변화를 피해 건조하고 서늘한 곳에 보관하십시오.
케이블 관리: Inspect cables regularly for any signs of damage. Do not pull on the cables to disconnect them; always grasp the connector.
Software Updates (DS500 Elite): Regularly check for and install software updates to ensure the scanner has the latest vehicle data and diagnostic capabilities.

6. 문제 해결

장치 전원이 켜지지 않음:
- DS500 Elite: Ensure the OBD-II cable is securely connected to the vehicle's diagnostic port. Check the vehicle's battery for sufficient charge.
- BT310: clamps are correctly connected to the battery terminals (red to positive, black to negative) and that the battery has sufficient voltage.
Communication Error (DS500 Elite):
- 차량의 점화가 켜져 있는지 확인하세요.
- Ensure the OBD-II connector is fully seated.
- Verify that the vehicle supports the OBD-II protocol.
- Try testing on a different compatible vehicle to rule out a vehicle-specific issue.
배터리 테스트 결과 오류(BT310):
- 배터리 cl을 확인하십시오.amps are clean and have good contact with the battery terminals.
- Verify that the correct battery type and CCA rating were entered into the tester.
- Ensure the battery is fully charged before testing for the most accurate results.
Screen Freezes or Device Unresponsive:
- Perform a soft reset by holding the power button (if available) or disconnecting and reconnecting the device.
- If the issue persists, contact ANCEL support.

7. 사양

7.1 ANCEL DS500 Elite Bidirectional Scan Tool

프로세서: 2.0GHz Cortex-A53 Quad-Core
운영 체제: 안드로이드 10.0
메모리: 2GB RAM, 32GB ROM
표시하다: 7-inch screen, 1024x600 resolution
배터리: 3150mAh, 3.8V
연결성: Wi-Fi for updates and online support
진단 기능: Full system diagnostics, bidirectional control, 28+ reset services.

ANCEL DS500 Elite hardware specifications including processor, OS, memory, screen, and battery. — Image: Detailed hardware specifications of the ANCEL DS500 Elite, including its 2.0GHz Cortex-A53 Quad-Core processor, Android 10.0 operating system, 2GB RAM, 32GB ROM, 7-inch 1024x600 resolution display, and 3150mAh 3.8V battery, highlighting its robust internal components.

7.2 ANCEL BT310 12V/24V Car Battery Tester

권tag전자 범위: 12V 및 24V
CCA 범위: 100-2000CCA
지원되는 배터리 유형: Flooded, AGM (Spiral & Flat Plate), GEL, EFB, Lithium.
지원되는 표준: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.
수행된 테스트: Battery Health (SOC, SOH, Voltage, Internal Resistance, Rated/Measured CCA), Cranking Test, Charging Test.

8. 보증 및 지원

The ANCEL DS500 Elite comes with lifetime free software updates, ensuring your tool remains compatible with evolving vehicle diagnostic systems without additional subscription fees. For technical assistance or support, you can easily contact the professional engineering team through the online chat window available on the DS500 Elite device. Feedback can also be provided via the feedback section on the device to help improve services.

	ANCEL AD530 Pro 사용자 설명서: OBDII 스캐너 및 배터리 테스터 사용 안내서 ANCEL AD530 Pro 2-in-1 자동차 진단 도구에 대한 자세한 사용자 설명서입니다. OBDII 기능(예: 판독/수신)에 대한 내용을 다룹니다.asinG 코드 및 시동, 충전, 리플 테스트를 포함한 종합적인 자동차 배터리 테스트.
	ANCEL DS500 Elite & DS500 BT: Intelligent Vehicle Diagnostic Tools Discover the ANCEL DS500 Elite and DS500 BT, advanced Android-based vehicle diagnostic devices. This overview details their features, technical specifications, usage instructions, and warranty information for efficient car maintenance and troubleshooting.
	ANCEL AD410 Pro+ OBDII 및 배터리 테스터 사용 설명서 ANCEL AD410 Pro+ 2-in-1 OBD2 스캐너 및 배터리 테스터에 대한 포괄적인 가이드로, OBDII 기능, 배터리 테스트, 메뉴 탐색 등을 다루고 있습니다.
	ANCEL BA101 자동차 배터리 테스터 사용 설명서 ANCEL BA101 자동차 배터리 테스터 사용 설명서는 납산, AGM, 젤, EFB 유형을 포함한 12V 차량용 배터리를 정확하게 테스트하도록 설계된 전문가용 자동차 진단 도구인 BA101의 작동에 대한 포괄적인 지침을 제공합니다. 이 설명서는 배터리 상태 분석, 시동 시스템 평가 및 충전 시스템 진단을 다루며, 빠른 테스트, 차량 내외 테스트, 데이터 기록 등을 위한 자세한 단계를 제공합니다.view그리고 인쇄 기능도 포함됩니다. 배터리 상태를 확인하고, 저전압과 같은 문제를 식별하는 방법을 알아보세요.tag배터리 셀의 결함 여부를 확인하고, 효과적인 차량 유지 관리를 위해 CCA, BCI, SAE와 같은 다양한 배터리 표준을 이해해야 합니다.
	ANCEL BA101 자동차 배터리 테스터: 사용 설명서 및 사양 ANCEL BA101 자동차 배터리 테스터에 대한 종합 안내서로, 중요 경고, 빠른 시작 가이드, 기술 사양, 오류 코드 설명 및 정확한 결과를 위한 팁을 제공합니다. 12V 자동차 배터리용으로 설계되었습니다.
	ANCEL V5 및 V5 BT 사용자 설명서: 종합 자동차 진단 도구 안내서 이 사용 설명서는 ANCEL V5 및 V5 BT 자동차 진단 도구에 대한 자세한 사용 방법을 제공합니다. 본 설명서는 제품의 여러 버전을 다룹니다.view제품 사양, 인터페이스 설명, 진단, 핫 기능, DTC 조회, 데이터 관리, 피드백, 설정, 제품 활성화, 청소, 유지 관리 및 보증 정보를 포함한 소프트웨어 기능.

ANCEL DS500 Elite, BT310