GIOTOHUN 3.2L Cat Fountain User Manual

환영

Thank you for choosing the GIOTOHUN 3.2L Cat Fountain. This manual provides essential information for the safe and efficient operation, maintenance, and care of your pet's new water fountain. Please read these instructions carefully before first use and retain them for future reference.

제품 구성 요소

The GIOTOHUN 3.2L Cat Fountain consists of the following main components:

• 물탱크 (용량 3.2L)
• Top Tray/Drinking Surface
• 물 펌프
• Faucet Spout (for faucet mode)
• 필터 트레이
• Carbon Filters (12 included)
• Foam Filters (12 included)
• 전원 어댑터

이미지: 이상view of compatible fountain types and filter components, highlighting the foam and carbon filters.

설치 지침

Follow these steps to assemble and prepare your GIOTOHUN Cat Fountain for first use:

1. 구성 요소 풀기: 포장에서 모든 부품을 조심스럽게 꺼냅니다.
2. Rinse All Parts: Wash the water tank, top tray, and filter tray with water. Do not wash the pump with soap.
3. 펌프 설치: Place the water pump into the designated area at the bottom of the water tank. Ensure the power cord is routed through the groove.
4. 필터 삽입: Place one foam filter into the filter tray, then place one carbon filter on top of the foam filter. Rinse the carbon filter under running water for a few minutes to remove any loose carbon dust before installation.
5. Assemble Filter Tray: Place the filter tray with installed filters onto the pump.
6. 물 탱크 채우기: Fill the water tank with clean water up to the MAX line. Do not exceed the MAX line to prevent overflow.
7. Place Top Tray: Position the top tray onto the water tank, ensuring it sits securely. If using the faucet mode, insert the faucet spout into the designated opening on the top tray.
8. 전원 연결: Connect the power adapter to the fountain's power cord and plug it into a standard electrical outlet.

Image: Filling the water tank of the fountain. Ensure water level is between MIN and MAX indicators.

작동 지침

The GIOTOHUN Cat Fountain offers two water flow modes and features an LED light for convenience.

물 흐름 모드:

• Faucet Mode: Provides a stream of water mimicking a tap, which can encourage pets to drink more. To activate, ensure the faucet spout is installed.
• 분수 모드: Provides a bubbling water surface. To activate, remove the faucet spout.

Image: Cat drinking from the fountain in faucet mode, demonstrating the flowing water feature.

수위 모니터링:

The fountain features a translucent water tank and a built-in LED light, allowing you to easily monitor the water level without disassembling the unit. Ensure the water level is always above the MIN mark to prevent pump damage and below the MAX mark to avoid spills.

Image: The fountain's LED light illuminates the water, making it easy to check the water level, especially in low light conditions.

유지

정기적인 청소와 필터 교체는 수질을 유지하고 분수대의 수명을 연장하는 데 매우 중요합니다.

일일/주간 유지 관리:

• 물 보충: Check the water level daily and refill as needed. The 3.2L capacity can provide water for 7-10 days for a single pet.
• 펌프 청소: Clean the water pump every 2-4 weeks. Disassemble the pump and clean all parts with water to remove any debris or mineral buildup. Refer to the pump's specific instructions for detailed cleaning.

필터 교체:

The fountain utilizes a triple filtration system:

• 폼 필터: 머리카락과 먼지를 걸러냅니다.
• 활성탄 필터: Removes odors and impurities, softens water.

It is recommended to change the carbon filter every 2-4 weeks and the foam filter as needed, typically every 2-4 weeks, or more frequently if you have multiple pets or notice reduced water flow.

Image: Diagram of the triple filtration system, showing how water passes through foam and activated carbon filters.

Image: Replacement filters for the GIOTOHUN cat fountain, emphasizing the need for regular filter changes.

문제 해결

If you encounter issues with your GIOTOHUN Cat Fountain, please refer to the following common problems and solutions:

• 물 흐름 없음:
  • 전원 확인: Ensure the power adapter is securely plugged into both the fountain and the electrical outlet.
  • 수위 확인: Refill water if below the MIN line.
  • 펌프 청소: Disassemble and clean the pump thoroughly. Hair or debris can block the impeller.
  • 필터 확인: Clogged filters can restrict water flow. Replace filters if necessary.
• 과도한 소음:
  • 수위 확인: Low water levels can cause the pump to run loudly. Refill water.
  • 펌프 청소: Debris in the pump can cause noise. Clean the pump impeller.
  • 올바른 조립을 확인하십시오: Make sure all parts are correctly assembled and seated firmly.
• 물 누출:
  • 수위 확인: Do not overfill past the MAX line.
  • 올바른 조립을 확인하십시오: Verify that the top tray and all components are correctly seated and sealed.
  • 손상 여부 검사: Check the tank and components for any cracks or damage.

Image: The fountain operates quietly (below 30dB), ensuring a peaceful environment for pets and owners.

제품 사양

Image: Visual representation of the fountain's 3.2L large capacity, suitable for extended use.

보증 및 지원

For warranty information or technical support, please refer to the product packaging or contact GIOTOHUN customer service. Keep your purchase receipt as proof of purchase.

추가 지원이 필요하면 다음을 방문하세요. GIOTOHUN Store on Amazon.