Life KRV306 Robot Vacuum Cleaner and Mop User Manual

소개

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Life KRV306 Robot Vacuum Cleaner and Mop. The KRV306 is an intelligent 2-in-1 cleaning device designed to vacuum and mop various floor types, offering convenience and efficiency for daily home cleaning.

1. 설정

1.1 풀기

포장에서 모든 구성품을 조심스럽게 꺼내십시오. 모든 액세서리가 있는지 확인하십시오.

• Life KRV306 Robot Vacuum Cleaner
• 충전 케이블/어댑터
• 쓰레기 좀
• Mopping Pad (if pre-installed or separate)
• 사이드 브러시
• 사용 설명서 (본 문서)

1.2 초기 충전

Before first use, fully charge the robot. Connect the charging cable to the robot and a power outlet. The indicator light will show charging status. A full charge takes approximately 3 to 4 hours.

1.3 사이드 브러시 설치

Align the side brushes with the corresponding posts on the bottom of the robot and press down until they click into place.

1.4 Installing the Dustbin and Mopping Pad

Insert the dustbin into its designated slot until it is securely in place. If using the mopping function, attach the mopping pad to the bottom of the water tank (if separate) or directly to the robot as per design.

2. 사용 설명서

2.1 전원 켜기/끄기

Press and hold the power button on the robot for a few seconds to turn it on or off. A chime or indicator light will confirm the status.

2.2 청소 모드

The KRV306 offers three optimized cleaning modes:

• 자동 모드: The robot cleans in a zigzag pattern, covering large areas efficiently. This is the default mode for general cleaning.
• 스팟 모드: For concentrated dirt, the robot cleans intensively in a circular pattern. Place the robot directly over the area to be cleaned and select this mode.
• 에지 모드: The robot follows walls and furniture edges to ensure thorough cleaning of corners and baseboards.

To select a cleaning mode, press the appropriate button on the robot or use the remote control (if included).

2.3 청소 주기 시작

Press the "Start" or "Clean" button on the robot. The robot will begin cleaning in the selected mode. Ensure the floor is free of large obstacles and loose cables.

2.4 일시 정지 및 재개

To pause a cleaning cycle, press the "Start/Pause" button. Press it again to resume cleaning.

2.5 Returning to Charger

When the battery is low, the robot will automatically attempt to return to its charging base. You can also manually send it back by pressing the home/charge button.

3. 유지관리

정기적인 유지관리를 통해 최적의 성능을 보장하고 로봇 진공 청소기의 수명을 연장할 수 있습니다.

3.1 쓰레기통 비우기

Image: The Life KRV306 robot vacuum cleaner demonstrating its large dustbin capacity, designed to hold more debris per clean and reduce emptying frequency. The image shows the robot on a wooden floor, actively vacuuming various types of debris including hair, pet hair, confetti, dust, and general debris, with an inset showing the removable dustbin component.

Empty the dustbin after each cleaning cycle or when full. Press the release button to remove the dustbin, open its lid, and discard the collected debris. Clean the filter regularly by tapping it gently to remove dust or rinsing it with water if specified (ensure it's completely dry before reinstallation).

3.2 모핑 패드 청소

Remove the mopping pad after each use. Rinse it thoroughly with water and mild detergent if necessary. Allow it to air dry completely before reattaching or storing.

3.3 측면 브러시 청소

Periodically check the side brushes for tangled hair or debris. Remove any obstructions carefully. If brushes are worn or damaged, replace them.

3.4 센서 청소

Image: The Life KRV306 robot vacuum cleaner positioned near a set of stairs, illustrating its anti-falling capability. The image highlights the infrared sensors that detect drops, preventing the robot from falling down stairs or off ledges.

Wipe the anti-falling infrared sensors and other sensors on the robot's underside with a clean, dry cloth to ensure they function correctly and prevent navigation issues.

4. 문제 해결

일반적인 문제와 해결 방법은 이 섹션을 참조하세요.

4.1 Robot Not Moving or Getting Stuck

Image: The Life KRV306 robot vacuum cleaner demonstrating its ability to navigate over thresholds up to 10mm high, ensuring continuous cleaning across different rooms without getting stuck. The image shows the robot smoothly transitioning from one floor level to another.

• 장애물 확인: Ensure there are no loose cables, rugs, or small objects obstructing the robot's path. The robot is designed to handle thresholds up to 10mm.
• Clean Wheels and Brushes: Remove any hair or debris tangled around the wheels or side brushes.
• 센서 장애물: Clean the anti-falling sensors and bumper sensors.

4.2 청소 성능 불량

• 쓰레기통 비우기: A full dustbin or clogged filter can reduce suction power. Empty the dustbin and clean the filter.
• 깨끗한 브러시: Ensure side brushes are free of debris and spinning correctly.
• 배터리 수준: Ensure the robot is fully charged for optimal performance.

4.3 로봇이 충전되지 않음

• 연결 확인: Ensure the charging cable is securely connected to both the robot and the power outlet.
• 깨끗한 충전 접점: Wipe the charging contacts on both the robot and the charging base with a dry cloth.

4.4 Robot Bumping into Furniture Excessively

Image: The Life KRV306 robot vacuum cleaner demonstrating its collision mechanical bumper. The robot is shown gently encountering a chair leg, indicating its ability to soft-hit obstacles and automatically adjust its path without causing damage to furniture.

• Clean Bumper Sensors: Ensure the bumper area is clean and free from obstructions.
• 조명 조건: In very dark environments, obstacle detection might be less effective.

5. 사양

6. 보증 정보

The Life KRV306 Robot Vacuum Cleaner and Mop comes with a 90일 보증 구매일로부터 유효합니다. 본 보증은 정상적인 사용 조건에서 발생하는 제조상의 결함 및 오작동에 적용됩니다. 단, 오용, 사고, 무단 수리 또는 정상적인 마모로 인한 손상은 보증 대상에서 제외됩니다. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오.

7. 고객 지원

If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact our customer support. Refer to your purchase documentation or the retailer's web구체적인 연락처 정보는 해당 사이트를 참조하세요.

지원팀에 문의할 때는 다음 정보를 준비해 주세요.

• 제품 모델: Life KRV306
• 구매일자
• 문제에 대한 설명