소개
The SmallRig AP255Pro is a compact and portable carbon fiber travel tripod designed for photographers and videographers. It features a 5-section leg design and a fluid head, offering stability and versatility for various shooting scenarios.
Key features include a bowl base for quick leveling, a 180-degree reversible center column for low-angle and macro shots, and a fluid head with a 3kg (6.6lb) maximum load capacity, supporting 360-degree rotation, 90-degree overhead shooting, and 65-degree upward shooting.
The tripod legs are compatible with various heads and stabilizers via 3/8''-16 threaded holes, supporting an 8kg (17lb) maximum payload. The tripod head accommodates mirrorless cameras, camera cages, and phones using 1/4''-20 threaded holes and the included phone clamp.
상자 안에 무엇이 들어있나요?
포장을 풀 때 모든 구성품이 들어 있는지 확인하세요.
- Compact Travel Tripod x 1
- 폰 홀더 x 1
- 휴대용 가방 x 1
설치 지침
1. 삼각대 다리 펼치기
Unlock the leg sections by twisting the leg locks. Extend each of the 5 leg sections to the desired length. Twist the locks in the opposite direction to secure them. Ensure all leg sections are fully locked before use.
2. Adjusting the Center Column
To adjust the height of the center column, loosen the center column lock, raise or lower the column, and then tighten the lock securely. For low-angle shots, the center column can be inverted. Loosen the center column lock, remove the column, flip it upside down, and reinsert it, then secure the lock.
3. Leveling the Tripod with the Bowl Base
The tripod features a bowl base for quick leveling. After setting up the legs, use the bowl base adjustment to fine-tune the head's level without needing to adjust each leg individually. This is particularly useful on uneven terrain.
4. 기기 연결하기
The fluid head includes a quick release plate. Attach this plate to your camera or camera cage using the 1/4''-20 threaded screw. For smartphones, use the provided phone holder, which also attaches to the quick release plate. Once attached, slide the quick release plate with your device into the head and secure it with the quick release plate lock.
작동 지침
1. Using the Fluid Head
The fluid head allows for smooth panning and tilting movements. Use the pan lock to control horizontal rotation (360 degrees) and the tilt lock to control vertical movement (90 degrees overhead, 65 degrees upward). Loosen the respective locks for movement and tighten them to secure the position.
2. Carbon Fiber Leg Design
The tripod legs are constructed from carbon fiber, providing a balance of portability and stability. The maximum leg diameter is 25.5mm (1 inch).
유지
- 청소: 사용 후에는 부드럽고 마른 천으로 삼각대를 닦아주세요. 잘 지워지지 않는 얼룩은 약간 거친 천으로 닦아내십시오.amp 천과 순한 비누로 닦은 후 완전히 말리세요. 강한 화학 물질은 피하세요.
- 매끄럽게 하기: Periodically check leg locks and moving parts for smooth operation. Do not over-lubricate; use a small amount of silicone-based lubricant if necessary.
- 저장: 삼각대는 전용 가방에 넣어 직사광선과 극한 온도 변화를 피해 건조하고 서늘한 곳에 보관하십시오.
- 점검: Regularly inspect all screws, bolts, and connections to ensure they are tight. Do not overtighten.
문제 해결
- 삼각대가 불안정합니다. Ensure all leg locks are fully tightened and the center column lock is secure. Check that the tripod is placed on a flat, stable surface.
- Leg sections are stiff: Clean the leg sections and locks to remove any dirt or debris. A small amount of silicone lubricant can be applied to the moving parts if needed.
- Fluid head movement is not smooth: Ensure the pan and tilt locks are sufficiently loosened. Check for any obstructions or debris in the fluid head mechanism.
- 카메라가 제대로 장착되지 않았습니다. Verify that the quick release plate is correctly attached to your camera and fully seated in the fluid head, with the quick release plate lock engaged.
명세서
| 특징 | 세부 사항 |
|---|---|
| 제품 치수 | 3.46 x 3.15 x 20.47인치(88.0 x 79.0 x 520.0mm) |
| 품목 무게 | 3.3파운드(1.5킬로그램) |
| 품목 모델 번호 | 13649 |
| 상표 | 스몰리그 |
| 색상 | 검은색 |
| 재료 | Aluminum, Carbon Fiber, ABS |
| 최대 높이 | 160센티미터(63인치) |
| 삼각대 헤드 유형 | 팬 헤드 |
| Tripod Leg Max Load Capacity | 8kg (17lb) |
| Tripod Head Max Load Capacity | 3kg (6.6lb) |
| 접힌 길이 | 52cm(20.5인치) |
| 다리 섹션 | 5 |
| Max Leg Diameter | 25.5mm(1인치) |
보증 및 지원
보증 정보 및 기술 지원에 대해서는 SmallRig 공식 웹사이트를 참조하십시오. web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.
You can typically find support contact details and warranty terms on the manufacturer's product page or in the documentation included with your purchase.
