ANCEL BT310 12V 24V Car Battery Tester and ANCEL TD700 Diagnostic Tool User Manual

1. 서론

This manual provides detailed instructions for the ANCEL BT310 12V 24V Car Battery Tester and the ANCEL TD700 Diagnostic Tool. This bundle offers comprehensive solutions for vehicle battery health assessment and advanced automotive diagnostics. The BT310 is designed to accurately test 12V and 24V vehicle batteries, including cranking and charging system analysis. The TD700 is a specialized diagnostic scanner for Toyota vehicles, offering multi-system diagnosis and special functions, alongside standard OBD2 capabilities for all vehicle brands.

2. ANCEL BT310 Battery Tester Overview

The ANCEL BT310 is a professional tool for evaluating the health of 12V and 24V automotive batteries. It performs battery tests, cranking tests, and charging system tests to provide a complete picture of your vehicle's electrical system. It supports a wide range of battery types and CCA values.

2.1 Key Features of BT310

• 12V 및 24V 배터리를 지원합니다.
• Tests batteries with Cold Cranking Amps (CCA) ratings from 100 to 2000.
• Performs Battery Test, Cranking Test, and Charging Test.
• Compatible with various battery types: Flooded, EFB, GEL, AGM Spiral, AGM Flat Plate, and Lithium-Ion.
• Provides detailed results including Voltage, Measured CCA, State of Charge, State of Health, and Internal Resistance.

Figure 2.1: ANCEL BT310 Battery Tester connected to a vehicle battery, illustrating its primary function.

Figure 2.2: BT310 compatibility with different battery technologies (Flooded, EFB, GEL, AGM, Lithium-Ion) and vehicle types (ATV, Boat, Car, SUV, Pickup, Motorcycle).

3. ANCEL TD700 Diagnostic Tool Overview

The ANCEL TD700 is a professional-level diagnostic scanner specifically designed for Toyota vehicles, offering in-depth system diagnostics and special service functions. It also provides full OBD2 functionality for all OBD2-compliant vehicles, making it a versatile tool for automotive enthusiasts and professionals.

3.1 Key Features of TD700

• Toyota Multi-System Diagnosis: Accesses Engine, Transmission, Airbag, TPMS, ABS, SAS, BMS, EPB, GPS, ESP, A/C, and more.
• Professional-Level Toyota Functions: Includes Oil Reset, EPB Reset, ETC Reset, TPMS Reset, BMS Reset, ABS Bleeding, SAS Calibration, DPF Regeneration, Throttle Learning, Battery Registration, Injector Coding. Note: Specific functions may vary by vehicle model and year.
• OBD2의 모든 기능: Read Codes, Erase Codes, Live Data Stream, I/M Readiness, Evap System Test, Vehicle Information, DTC Lookup, Turn off Malfunction Indicator Lamp (밀).
• 추가 기능: 배터리 용량tage Check, One-click Smog Check, Auto VIN detection.

Figure 3.1: ANCEL TD700 displaying its multi-system diagnostic menu for Toyota vehicles.

Figure 3.2: ANCEL TD700 showing its professional-level special functions menu for Toyota vehicles.

Figure 3.3: ANCEL TD700 displaying its OBD2 diagnostic menu, applicable to all vehicle brands.

4. 설정 및 연결

4.1 ANCEL BT310 Battery Tester Setup

1. 배터리 준비: Ensure the vehicle's ignition is off and all accessories are turned off. The battery terminals should be clean and free of corrosion.
2. 연결 Clamps: 빨간색 양극(+) cl을 연결합니다.amp of the BT310 to the positive (+) terminal of the battery. Connect the black negative (-) clamp 배터리의 음극(-) 단자에 연결합니다.
3. 전원 켜기: The BT310 will power on automatically once correctly connected to the battery.
4. 초기 설정: Follow the on-screen prompts to select language and other initial settings if required.

Figure 4.1: Proper connection of the BT310 clamps to a vehicle battery.

4.2 ANCEL TD700 Diagnostic Tool Setup

1. OBD2 포트를 찾으십시오: The OBD2 diagnostic port is typically located under the dashboard on the driver's side. Refer to your vehicle's manual if you cannot find it.
2. Connect TD700: Plug the TD700's OBD2 connector firmly into the vehicle's OBD2 port.
3. 전원 켜기: The TD700 will power on automatically once connected to the vehicle's OBD2 port.
4. 차량 점화: Turn the vehicle's ignition to the 'ON' position (engine off) for most diagnostic functions. For some tests, the engine may need to be running.

5. Operating the ANCEL BT310 Battery Tester

After connecting the BT310, use the navigation buttons (ENTER, EXIT, Up/Down arrows) to select desired tests from the main menu.

5.1 배터리 테스트

1. 메인 메뉴에서 "배터리 테스트"를 선택하고 Enter 키를 누르십시오.
2. Select the battery type (e.g., Flooded, AGM, GEL, Lithium-Ion) and press ENTER.
3. Enter the battery's Cold Cranking Amps (CCA) rating as specified on the battery label and press ENTER.
4. The tester will perform the analysis and display the results.
5. 결과 해석:
   • 좋은 배터리: 배터리 상태가 양호합니다.
   • Good-Recharge: Battery is good but needs recharging.
   • Charge & Retest: Battery needs charging, then retest to confirm health.
   • 베터리 교체: 배터리 수명이 다했으니 교체해야 합니다.
   • Bad Cell-Replace: One or more cells are faulty; replace the battery.

Figure 5.1: BT310 displaying comprehensive battery health results.

5.2 크랭킹 테스트

1. 메인 메뉴에서 "크랭킹 테스트"를 선택하고 Enter 키를 누르십시오.
2. 화면에 나타나는 지시에 따라 차량 엔진을 시동하십시오.
3. The tester will analyze the cranking voltage and time, then display the results.
4. 결과 해석: The display will show cranking time and voltage. A 'CRANKING NORMAL' message indicates a healthy starter system. Low voltage or extended cranking time may indicate issues with the battery or starter.

5.3 충전 테스트

1. 메인 메뉴에서 "충전 테스트"를 선택하고 Enter 키를 누르십시오.
2. Follow the on-screen instructions to start the vehicle's engine and perform any requested actions (e.g., revving the engine).
3. The tester will measure the alternator's output under various conditions (unloaded, loaded) and check for excessive ripple voltage.
4. 결과 해석: The display will show unloaded voltage, 로드된 볼륨tage, 그리고 리플 볼륨tage. A 'VOLTAGE NORMAL' message indicates a healthy charging system. Readings outside the normal range may indicate issues with the alternator or voltag전자 레귤레이터.

Figure 5.2: BT310 displaying Cranking Test and Charging Test results.

5.4 재view 데이터

"다시 선택"view Data" from the main menu to view previously saved test results. This allows for comparison and tracking of battery health over time.

6. Operating the ANCEL TD700 Diagnostic Tool

After connecting the TD700 to the vehicle's OBD2 port and turning the ignition on, the device will boot up. Use the navigation buttons (OK, ESC, Up/Down/Left/Right arrows) to navigate the menus.

6.1 Toyota Multi-System Diagnosis

1. From the main menu, select the Toyota diagnostic option.
2. The tool will automatically identify the vehicle or prompt you to enter vehicle information.
3. Select the desired system for diagnosis (e.g., Engine, Transmission, ABS, Airbag).
4. Choose to Read Codes, Erase Codes, or view Live Data Stream for the selected system.
5. 메모: Some advanced features and system access may only be supported on specific Toyota models. If a feature is not available, please confirm compatibility with your vehicle.

6.2 Toyota Professional-Level Functions

1. From the Toyota diagnostic menu, navigate to "Special Functions" or a similar option.
2. Select the desired function (e.g., Oil Reset, EPB Reset, BMS Reset).
3. Follow the on-screen instructions carefully to perform the service function. Ensure all prerequisites (e.g., engine off, ignition on) are met.
4. 주의: Special functions can alter vehicle settings. Ensure you understand the procedure before proceeding. Compatibility varies by vehicle.

6.3 OBD2 Functions (All Vehicle Brands)

1. From the main menu, select "OBDII/EOBD" or a similar option.
2. Choose from the available functions:
• 코드 읽기: Retrieves Diagnostic Trouble Codes (DTCs) from the Powertrain Control Module (PCM).
• 코드 지우기: 고장 코드를 삭제하고 고장 표시등을 끕니다.amp (밀).
• 라이브 데이터 스트림: 차량에서 수집된 실시간 센서 데이터를 표시합니다.
• I/M 준비: 배출 관련 모니터의 상태를 확인합니다.
• 증발 시스템 테스트: 증발가스 배출 제어 시스템 테스트를 시작합니다.
• 차량 정보: Retrieves vehicle identification number (VIN), calibration ID, etc.
• DTC 조회: 일반적인 DTC에 대한 정의를 제공합니다.

6.4 Additional Features of TD700

• 배터리 용량tage 확인: Quickly checks the current voltage of the vehicle's battery.
• One-click Smog Check: Provides a quick status check for emissions readiness.
• 자동차 VIN: Automatically retrieves the vehicle's VIN for quick identification.

Figure 6.1: TD700 displaying additional features such as Battery Voltage Check and Auto VIN.

7. 유지관리

• 청소: Use a soft, dry cloth to clean the device casings. Avoid using abrasive cleaners or solvents.
• 저장: Store the devices in a dry, cool environment, away from direct sunlight and extreme temperatures. Keep them in their original packaging or a protective case when not in use.
• 케이블 관리: 케이블 손상 여부를 정기적으로 점검하십시오. 케이블을 과도하게 구부리거나 꺾지 마십시오.
• 소프트웨어 업데이트: ANCEL 공식 웹사이트를 주기적으로 확인하세요. website for available software updates for both the BT310 and TD700 to ensure optimal performance and compatibility with newer vehicles.

8. 문제 해결

9. 사양

9.1 ANCEL BT310 Battery Tester

• 권tag전자 범위: 9V - 30V 직류
• 테스트 범위: 100~2000CCA
• 지원되는 배터리 유형: Flooded, EFB, GEL, AGM Spiral, AGM Flat Plate, Lithium-Ion
• 작동 온도: 0°C ~ 50°C(32°F ~ 122°F)
• 보관 온도: -20°C ~ 70°C (-4°F ~ 158°F)

9.2 ANCEL TD700 Diagnostic Tool

• 표시하다: 컬러 LCD
• 연결성: Standard 16-pin OBD2 connector
• 지원되는 프로토콜: OBDII/EOBD 규격 준수 프로토콜
• 차량 범위 : Toyota (multi-system & special functions), All OBD2 compliant vehicles (engine diagnostics)
• 작동 온도: 0°C ~ 50°C(32°F ~ 122°F)
• 보관 온도: -20°C ~ 70°C (-4°F ~ 158°F)

10. 보증 및 지원

ANCEL products typically come with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official ANCEL website. If you encounter any issues or have questions regarding the ANCEL BT310 or TD700, please contact ANCEL customer support through the following channels:

• 공식 ANCEL을 방문하세요 web지원 리소스와 연락처 정보를 제공하는 사이트입니다.
• Contact the seller directly via the Amazon messaging system for assistance.