Merax B0FX4WBGP5

Merax Queen Size Boucle Bed Frame with Wingback Headboard User Manual

Model: B0FX4WBGP5

1. 서론

Thank you for choosing the Merax Queen Size Boucle Bed Frame with Wingback Headboard. This manual provides essential information for the safe assembly, proper use, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

2. 안전 정보

중요 안전 지침:

  • 불안정성을 방지하기 위해 조립 설명서를 항상 주의 깊게 따르십시오.
  • 최대 권장 중량을 초과하지 마십시오. 500파운드 손상이나 부상을 방지하기 위해.
  • Be cautious when handling heavy components during assembly. It is recommended to assemble with two people.
  • 사용 전에 모든 볼트와 나사가 단단히 조여졌는지 확인하십시오. 정기적으로 점검하고 필요하면 다시 조이십시오.
  • 조립하는 동안 작은 부품은 어린이의 손이 닿지 않는 곳에 보관하세요.
  • Do not use power tools for assembly unless specifically instructed, as this may overtighten and damage components.

3. 구성품 목록

Before assembly, verify that all parts are present and undamaged. Refer to the included diagram in your package for a complete visual list of components and hardware.

  • Headboard (Wingback Upholstered)
  • 측면 레일(좌측 및 우측)
  • 발판
  • 나무 판자
  • Center Support Leg(s)
  • Walnut Wooden Legs
  • 하드웨어 팩(볼트, 와셔, 너트, 앨런 렌치)
  • 설치 설명서(본 문서)
Diagram showing Queen bed frame dimensions and 500 lb weight capacity
그림 1: Overall dimensions and weight capacity for the Queen size bed frame. The diagram indicates a weight capacity of 500 lbs.

4. 조립 설명서

Assembly requires two adults. Please follow the detailed, step-by-step instructions and diagrams provided in the separate installation manual included with your product packaging. The general steps are outlined below:

  1. 부품 풀기 및 식별: Lay out all components on a soft, clean surface to prevent scratches. Compare with the components list and hardware pack.
  2. 헤드보드와 풋보드에 다리를 부착하세요: Secure the walnut wooden legs to the headboard and footboard using the provided hardware.
  3. 측면 레일 연결: Attach the side rails to the headboard and footboard. Ensure all connections are firm but do not overtighten initially.
  4. 설치 센터 지원: Assemble and install any center support beams and legs as per the diagrams.
  5. 나무 판자를 놓으세요: Distribute the wooden slats evenly across the frame and secure them using the designated fasteners. Ensure all slats are properly seated and secured.
  6. 최종 조임: 모든 부품이 제자리에 설치되면 다시 돌아가서 모든 볼트와 나사를 단단히 조이십시오.
앞쪽 view of the Merax Queen bed frame with wooden slats installed
그림 2: 앞쪽 view of the assembled bed frame, showcasing the wooden slats and center support leg.
옆 view of the Merax Queen bed frame with wooden slats installed
그림 3: 옆 view of the assembled bed frame, illustrating the wooden slats and the frame's profile.

5. 이용 가이드라인

  • 매트리스 호환성: This bed frame is designed for a Queen size mattress. A box spring is not required due to the sturdy wooden slat support system.
  • 중량 용량: The maximum weight capacity for this bed frame is 500 pounds, including the mattress and occupants. Do not exceed this limit.
  • 놓기: Position the bed frame on a level surface to ensure stability and prevent undue stress on the frame.
  • 움직임: When moving the bed, lift it rather than dragging it to prevent damage to the legs and frame structure.
Merax Queen Size Boucle Bed Frame with Wingback Headboard in a bedroom setting with a mattress and bedding
그림 4: The Merax bed frame with a mattress and bedding, demonstrating its intended use.

6. 유지관리

  • 실내 장식 청소: For routine cleaning, gently vacuum the boucle fabric headboard and frame to remove dust and debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner following the product's instructions, testing on an inconspicuous area first.
  • Cleaning Wooden Legs: Wipe the walnut wooden legs with a soft, damp 천으로 닦으세요. 강한 화학 물질이나 연마성 세제는 피하세요.
  • 하드웨어 검사: Periodically (every 3-6 months) check all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain stability and safety.
  • 직사광선을 피하세요: 직사광선에 장시간 노출되면 원단이 탈색될 수 있습니다.

7. 문제 해결

문제가능한 원인해결책
침대 프레임이 흔들리거나 불안정합니다.헐거운 하드웨어; 고르지 않은 바닥.Ensure all bolts and screws are securely tightened. Check if the bed is on a level surface; use furniture pads if needed.
삐걱거리는 소리.Loose connections; friction between components.Re-tighten all assembly hardware. Apply a small amount of lubricant (e.g., paraffin wax) to contact points between slats and frame if necessary.
Slats appear to be sagging.Improper slat installation; excessive weight.Verify that all slats are correctly positioned and secured. Ensure the total weight on the bed does not exceed 500 lbs.
개봉 중 부품이 누락되었습니다.포장 오류.Contact Merax customer support immediately with your purchase details.

8. 사양

특징세부 사항
상표메락스
모델 번호B0FX4WBGP5
크기여왕
제품 크기(L x W x H)85인치 길이 x 65인치 너비 x 42.5인치 높이
색상Ivory Boucle
재료Boucle, Engineered Wood, Wood
헤드보드 소재Fabric/Upholstered
특징박스 스프링이 필요 없습니다
중량 용량500파운드
품목 무게76파운드
조립이 필요합니다

9. 고객 지원

For any questions, missing parts, or assistance with assembly, please contact Merax customer support. Refer to your purchase documentation or the Merax official web연락처 정보 사이트.

온라인 지원: 아마존에서 Merax 스토어를 방문하세요.

관련 문서 - B0FX4WBGP5

사전view 메락스 WF305618 퀸 사이즈 패브릭 침대 조립 설명서
Merax WF305618 퀸 사이즈 벨벳 플로팅 플랫폼 침대의 조립 설명서입니다. 부품 목록, 하드웨어 세부 정보, 단계별 조립 설명 및 도표에 대한 텍스트 설명이 포함되어 있습니다.
사전view Merax WF310629-WF310630 플랫폼 침대 조립 설명서
Merax WF310629-WF310630 플랫폼 침대 프레임에 대한 자세한 조립 설명서(헤드보드, 책장, 트런들, 서랍 포함)입니다. 부품 목록, 하드웨어 목록, 단계별 조립 가이드가 포함되어 있습니다.
사전view Merax 트윈 침대 조립 설명서
Merax 트윈 침대(모델 WF187441)에 대한 자세한 조립 설명서에는 부품 목록, 하드웨어 목록, 단계별 시각적 가이드가 포함되어 있습니다.
사전view 트윈 하우스 침대 조립 설명서 - 모델 WF311785
WF311785 트윈 하우스 침대 조립 설명서입니다. 부품 목록, 하드웨어 목록, 각 조립 단계에 대한 자세한 도면과 설명이 포함되어 있습니다.tage.
사전view Merax WF307270/WF307271 오토만 수납 침대 조립 설명서
Merax WF307270 및 WF307271 오토만 수납 침대 프레임에 대한 종합 조립 설명서입니다. 부품 목록, 하드웨어 세부 정보, 그리고 침대 조립을 위한 단계별 안내가 포함되어 있습니다.
사전view 메락스(Merax) 패브릭 플랫폼 침대 조립 설명서 - 모델 W1885142180-W1885142183
메락스 패딩 등받이 킹사이즈 패브릭 플랫폼 침대(모델 W1885142180-W1885142183)의 종합 조립 설명서입니다. 상세한 부품 목록, 하드웨어 목록, 그리고 도표에 대한 텍스트 설명이 포함된 단계별 조립 지침을 제공합니다.