1. 서론
구매해주셔서 감사합니다asing the ThermoPro TP210B Wireless Refrigerator/Freezer Thermometer. This device is designed to help you monitor the temperature of your refrigerator and freezer wirelessly, ensuring your food is stored at optimal temperatures. With a strong 500ft/150m wireless range and customizable alarms, you can easily keep track of temperature fluctuations.
2. 패키지 내용
- 1 x 수신기 유닛
- 1 x 송신기 유닛
- AAA 배터리 2개 (수신기용)
- 1 x USB Charging Cable (for Transmitter)
- 1 x 사용자 설명서
3. 주요 특징
- 확장된 무선 범위: Up to 500ft/150m using advanced RF technology for stable connection.
- 즉시 사용 가능하도록 사전 페어링됨: No complex setup required; units are pre-paired from the factory.
- 넓은 측정 범위: Accurate readings within ±0.9°F across -40°F to 158°F (-40°C to 70°C).
- 스마트 온도 알림: Customizable high/low temperature limits with audio-visual alarms.
- 읽기 쉬운 백라이트 디스플레이: Shows fridge and freezer readings, Max/Min records, and low-battery status.
- Considerate Power Design: Receiver uses AAA batteries, transmitter features a rechargeable lithium battery.
- 유연한 배치 옵션: Receiver has hook, stand, or magnet; transmitter has clip or stand.
4. 설정
4.1. Receiver Battery Installation
- Open the battery compartment on the back of the receiver unit.
- AAA 배터리 2개를 올바른 극성(+/-)에 맞춰 넣으세요.
- 배터리 칸을 단단히 닫으세요.
Note: The receiver requires 2 AAA batteries, which are included in the package.
4.2. Transmitter Charging
- Locate the charging port on the transmitter unit.
- Connect the provided USB charging cable to the transmitter and a standard USB power source (e.g., wall adapter, computer USB port).
- Allow the transmitter to charge fully before first use. The charging indicator will change when fully charged.
Note: The transmitter uses a rechargeable lithium battery designed for low-temperature environments.
4.3. Initial Pairing (Pre-Paired)
The ThermoPro TP210B units are pre-paired at the factory. Simply power on both the receiver and transmitter, and they should automatically connect. If connection issues occur, refer to the Troubleshooting section.
4.4. 배치
Image: ThermoPro TP210B Receiver and Transmitter. The receiver displays temperatures, while the transmitter sends data from inside the appliance.
수신기 배치:
- Use the integrated stand to place it on a countertop.
- Utilize the magnetic back to attach it to a metallic surface.
- Hang it using the hook on the back.
- Place the receiver in a location where you can easily view the display and hear alarms, within the 500ft/150m range of the transmitter.
송신기 배치:
- Place the transmitter inside your refrigerator or freezer.
- Use the integrated clip to attach it to a shelf or rack.
- Ensure the transmitter is not obstructed by large items that could block the wireless signal.
5. 사용 설명서
5.1. 전원 켜기/끄기
- 를 누르세요 힘 button on both the receiver and transmitter to turn them on or off.
5.2. 온도 측정
- The receiver's backlit LCD display will show the current temperature from the transmitter.
- The display typically shows both the current temperature and the all-time Max/Min records.
5.3. 온도 경보 설정
The TP210B allows you to set custom high and low temperature limits for alerts.
- 를 누르세요 알리다 button on the receiver. The high limit will flash.
- 사용하세요 UP or 아래에 buttons to adjust the high temperature limit.
- 누르다 알리다 again to confirm the high limit and move to the low limit setting.
- 사용하세요 UP or 아래에 buttons to adjust the low temperature limit.
- 누르다 알리다 a third time to confirm the low limit and exit alarm setting mode.
When the temperature exceeds the set range, the receiver will emit an audio-visual alarm.
5.4. Max/Min Temperature Records
- The receiver automatically records the maximum and minimum temperatures detected since the last reset.
- 를 누르세요 최대/최소 button to cycle through current, maximum, and minimum temperature readings.
- To reset the Max/Min records, press and hold the 최대/최소 버튼을 3초 동안 누른 상태에서 viewing the Max/Min display.
5.5. 백라이트
- The receiver features a bright backlit display for easy reading in low-light conditions.
- The backlight will activate automatically when a button is pressed and will turn off after a short period of inactivity to conserve battery.
6. 유지관리
6.1. 청소
- 광고로 기기를 닦으세요amp 천. 물에 담그지 마십시오.
- 연마성 세척제나 용제를 사용하지 마십시오.
6.2. Battery Replacement (Receiver)
- When the low battery indicator appears on the receiver display, replace the 2 AAA batteries.
- Ensure proper polarity when inserting new batteries.
6.3. Transmitter Charging
- Recharge the transmitter's lithium battery when the low battery indicator appears.
- 제공된 USB 충전 케이블을 사용하세요.
6.4. 보관
- If storing the device for an extended period, remove the AAA batteries from the receiver.
- 극한의 온도를 피해 건조한 곳에 보관하세요.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No temperature reading / "--" displayed | Transmitter not powered on, out of range, or low battery. |
|
| 부정확한 온도 판독값 | Sensor obstruction, extreme environmental conditions, or sensor malfunction. |
|
| 알람이 울리지 않습니다 | Alarm limits not set correctly or alarm function disabled. |
|
| 송신기 배터리가 빨리 소모됩니다 | Operating in extremely low temperatures or frequent signal transmission. |
|
8. 사양
- 온도 범위: -40°F ~ 158°F(-40°C ~ 70°C)
- 온도 정확도: ± 0.9 ° F (± 0.5 ° C)
- 무선 범위: 야외에서 최대 150m(500피트)
- 전송 주파수: 433MHz
- 수신기 전력: 2 x AAA 배터리(포함)
- 송신기 전력: Rechargeable Lithium battery (included, with USB charging cable)
- 표시하다: 백라이트 LCD
- 치수(수신기): 길이는 약 4.33인치입니다.
- 무게(품목): 약 11.2온스
9. 보증 및 지원
ThermoPro는 본 제품의 재료 및 제조상의 결함에 대해 보증을 제공합니다. 자세한 보증 정보, 제품 등록 또는 기술 지원은 ThermoPro 공식 웹사이트를 방문하십시오. web사이트를 방문하거나 고객 서비스에 직접 문의하세요.
공식적인 Web대지: www.thermopro.com
고객 지원: Refer to the contact information provided on the ThermoPro web사이트 또는 제품 포장.
