KGUSS FX-AUDIO- L06 Fully Balanced Power Ampliifier 사용 설명서

1. 서론

Thank you for choosing the KGUSS FX-AUDIO- L06 Fully Balanced Power Amplifier. This device is designed to deliver high-fidelity audio performance with its advanced Class D amplification and balanced circuit architecture. Please read this manual thoroughly before operating the amplifier to ensure proper setup, optimal performance, and safe use.

그림 1: 앞쪽 view of the KGUSS FX-AUDIO- L06 Fully Balanced Power Amp리파이어, 쇼크asing the VU meters and control knob.

2. 안전 지침

• 이 장치를 비, 습기 또는 극한의 온도에 노출시키지 마십시오.
• 적절한 환기를 확보하세요 amp과열을 방지하는 lifier.
• 열지 마세요 amp리파이어 casing. 모든 서비스는 자격을 갖춘 담당자에게 의뢰하세요.
• Use only the specified power adapter or a compatible power supply that meets the voltage 및 현재 요구 사항.
• Disconnect the power supply before making any connections or disconnections.
• 장치를 강한 자기장에서 멀리 두십시오.

3. 패키지 내용

다음 품목이 패키지에 포함되어 있는지 확인하세요.

• 1 x KGUSS FX-AUDIO- L06 Amp리퍼
• 1 x Power Adapter (standard)
• 1 x 사용자 설명서

4. 제품 오버view

4.1 전면 패널

그림 2: Front and Rear Panel Layout with corresponding descriptions.

1. ON/SEL Button: Press and hold to power on/off. Short press to switch audio sources (UNBAL/BAL).
2. Level Indicator Meter (VU Meter): Displays the audio output level for the left (L) and right (R) channels.
3. LED Indicator for Line Input: Illuminates when the unbalanced (RCA) input is selected.
4. LED Indicator for XLR Input: Illuminates when the balanced (XLR) input is selected.
5. 볼륨 노브: 왼쪽으로 돌리면 볼륨이 작아지고, 오른쪽으로 돌리면 볼륨이 커집니다.

4.2 후면 패널

6. Balanced XLR Signal Input (L/R): For connecting audio sources with balanced XLR outputs.
7. Single-ended RCA Input (L/R): For connecting audio sources with unbalanced RCA outputs.
8. 12V 트리거 출력: For controlling other devices with a 12V trigger input.
9. 12V 트리거 입력: For receiving a 12V trigger signal from another device.
10. Straight-through Mode Switch (DIAL ON): When set to ON, the signal passes through without volume control, allowing an external preamplifier to manage volume.
11. Meter Head Swing Switch (DIAL ON): When set to ON, the VU meters will swing. When set to OFF, the meters will be static.
12. R/L Speaker Output: Connects to passive speakers (2Ω-8Ω).
13. High Power DC Power Interface: Supports rated current 15A input. Requires a GX20-4 pin aviation power connector for maximum output (600W+600W).
14. Conventional DC Power Interface: Supports rated current 4A input. For routine use with standard power sources.

5. 설정 지침

5.1 스피커 연결하기

Connect your passive speakers to the R/L Speaker Output terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for each speaker. The L06 supports speakers with an impedance of 2Ω to 8Ω.

5.2 오디오 소스 연결

The L06 offers both balanced (XLR) and unbalanced (RCA) inputs. Choose the appropriate input based on your audio source device.

• XLR 입력: Use XLR cables to connect your audio source (e.g., DAC, preamplifier) to the Balanced XLR Signal Input (L/R) on the rear panel.
• RCA 입력: Use RCA cables to connect your audio source (e.g., CD player, TV BOX, smartphone) to the Single-ended RCA Input (L/R) on the rear panel.

그림 3: Diagram illustrating various device connections and input/output wiring for the L06 amp리퍼.

5.3 전원 연결

Connect the provided power adapter to the Conventional DC Power Interface (14) on the rear panel. For high-power applications requiring up to 500W+500W output, use a compatible 15A power supply with a GX20-4 pin aviation connector and connect it to the High Power DC Power Interface (13).

6. 사용 설명서

6.1 전원 켜기/끄기

를 누르고 계세요 ON/SEL button (1) on the front panel for a few seconds to power the ampliifier를 켜거나 끕니다.

6.2 입력 선택

전원을 켠 후 ON/SEL button (1) to cycle between the balanced (XLR) and unbalanced (RCA) inputs. The corresponding LED indicator (3 or 4) will illuminate to show the active input.

6.3 볼륨 조절

오디오 출력 레벨을 조정하려면 다음을 사용하십시오. 볼륨 노브 (5). Turn clockwise to increase volume and counter-clockwise to decrease volume.

6.4 VU Meter Operation

그만큼 Level Indicator Meters (VU Meters) (2) provide a visual representation of the audio signal level. Ensure the Meter Head Swing Switch (11) on the rear panel is set to 'ON' for the meters to function. If the 'Straight-through Mode Switch' (10) is 'ON', the volume knob will be bypassed, and the VU meters will reflect the input signal level without volume attenuation from the L06.

7. 주요 특징

• 고성능 출력: Features dual TPA3255 Class D amplifier chips, delivering up to 500W + 500W into 2Ω speakers.
• Ultra-low Distortion: Utilizes TI ultra-low distortion chipset and OPA1612 operational amplifier, achieving THD <0.007% and SNR >120dB.
• Fully Balanced Circuit Design: Supports selectable balanced (XLR) and single-ended (RCA) inputs, effectively reducing interference and improving signal clarity.
• Dual Power Input Modes: Accommodates both standard power sources and high-power configurations (up to 600W+600W with a GX20-4 pin aviation power connector) for versatile use.
• 보호 회로: Incorporates multifunctional protection circuits for enhanced device longevity and safety.
• Relay Channel Switching: Ensures smooth and reliable input source switching.

그림 4: Visual representation of the L06's core features, including chipset, inductor, and protection.

8. 유지관리

• 청소하다 amplifier's exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
• Ensure the ventilation slots are free from dust and obstructions to maintain proper airflow.
• 장기간 사용하지 않을 때는 기기를 서늘하고 건조한 곳에 보관하세요.

9. 문제 해결

10. 사양

11. 보증 및 지원

Warranty information for the KGUSS FX-AUDIO- L06 amplifier is typically provided at the point of purchase or included with the product packaging. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support or service inquiries, please contact your retailer or the manufacturer directly.