1. 소개 및 이상view
The GREENCUT BAS370C submersible water pump is engineered for efficient and stable water extraction from deep wells, tanks, and for domestic irrigation systems. This robust pump is designed for clean water applications, offering reliable performance and ease of installation.
주요 특징:
- 강력한 성능: 370W (0.5 HP) motor with a maximum flow rate of 20 L/min and a pumping height of up to 50m.
- 내구성 있는 구조: Features a screw-type impeller and IP58 protection, ensuring resistance to continuous underwater operation.
- 간편한 설치: Includes a 10m cable for straightforward setup in deep wells.
- 컴팩트하고 조용함: Designed for minimal noise and easy maintenance, suitable for clean water with particles ≤ 0.2 mm and temperatures up to 35°C.
2. 안전 지침
Always prioritize safety when operating electrical equipment near water.
- 전기 안전: Ensure the power supply matches the pump's requirements (220V). All electrical connections must be secure and waterproof. Use a residual current device (RCD) for added protection.
- 절대 마르지 마세요: Operating the pump without water will cause severe damage. Ensure the pump is fully submerged before starting.
- 물의 질: This pump is designed for clean water with small particles (≤ 0.2 mm) and a maximum temperature of 35°C. Do not use with dirty water, corrosive liquids, or flammable substances.
- 설치: Securely attach all hoses and cables. Use a strong rope or stainless steel cable to lower and retrieve the pump, ensuring it does not rely solely on the electrical cable.
- 역류 방지 밸브: It is highly recommended to install an external non-return valve to prevent water backflow and maintain pressure in the system. The internal non-return valve may not be sufficient for all applications.
- 저장: Before storing, completely drain the pump of water, especially in freezing conditions. Store in a dry, protected area.
- 유지: 유지보수 또는 청소를 하기 전에 전원을 차단하십시오.
3. 제품 특징
The GREENCUT BAS370C pump is built with high-quality materials and thoughtful design for optimal performance.
3.1 Robust and Durable Design
Constructed from stainless steel, the pump is highly resistant to corrosion and wear, ensuring a long operational life even under continuous submersion.
3.2 Efficient Motor and Hydraulic System
Equipped with a 370W (0.5 HP) motor and a screw-type impeller, the pump delivers stable and efficient performance. Its hydraulic configuration allows it to pump up to 20 liters per minute and achieve a maximum pumping height of 50 meters.
3.3 Integrated Electrical Control Box
The pump includes an electrical control box for safe and convenient operation. This box often contains the necessary capacitor for single-phase power conversion, as noted by users.
3.4 Versatile Installation
The pump can be installed and operated in both vertical and horizontal positions, provided it is fully submerged. Top handles facilitate easy insertion and handling in wells.
4. 기술 사양
| 사양 | 값 |
|---|---|
| 제조업체 | 그린컷 |
| 모델 번호 | 1000232 |
| 치수(길이 x 너비 x 높이) | 9 x 9 x 56cm |
| 무게 | 9.5kg |
| 힘 | 370W(0.5마력) |
| 권tage | 220V |
| 최대 유량 | 분당 20리터 |
| 최대 리프트 높이 | 50 미터 |
| 재료 | 스테인리스 스틸 |
| 전원 | 전기 케이블 |
| 케이블 길이 | 10 미터 |
| 보호 등급 | IP58 |
| 최대 수온 | 35도 |
| 최대 입자 크기 | ≤0.2 mm |
| 포함된 구성 요소 | 1x BAS370C Submersible Water Pump, 1x 10-meter Cable, 1x Electrical Control Box, 1x Instruction Manual |
5. 설정 및 설치
Follow these steps for proper installation of your GREENCUT BAS370C submersible pump:
- 펌프를 준비하세요: Ensure the pump is clean and free from any debris.
- 배출 호스를 연결하십시오: Attach a suitable discharge hose to the pump's outlet. Secure the connection with a hose clamp 누출을 방지하기 위해.
- Install Non-Return Valve: For optimal performance and to prevent water backflow, install a non-return valve in the discharge line, preferably above the pump.
- 펌프 고정: Attach a strong, non-corrosive rope or stainless steel cable to the pump's designated attachment points. This will be used to lower and retrieve the pump. Do not use the electrical cable for this purpose.
- 펌프 낮추기: Carefully lower the pump into the well or water source, ensuring it is fully submerged. The pump can operate vertically or horizontally.
- 전기 연결: Connect the pump's electrical cable to the provided electrical control box. Ensure all connections within the control box are correctly wired (main input, secondary input, ground) according to the wiring diagram in the manual. The control box typically contains a capacitor for single-phase operation.
- 전원 공급 장치: Connect the control box to a suitable 220V power supply, ensuring it is protected by an RCD.
5.1 Installation Video Example
Watch this video for a visual guide on installing a deep well submersible pump (note: specific model may vary, but principles apply):
6. 사용 설명서
Operating the GREENCUT BAS370C is straightforward once properly installed.
- Ensure Submersion: Verify that the pump is completely submerged in clean water before activating.
- 전원 활성화: Turn on the power supply to the electrical control box. The pump should start automatically.
- 모니터 성능: Observe the water flow and pressure. The pump is designed to provide consistent performance.
- 자동 작동(해당되는 경우): If your system includes an automatic pressure switch, the pump will start and stop automatically based on water demand (e.g., opening or closing a tap).
- 종료: To stop the pump, turn off the power supply at the control box.
6.1 Operation Video Examp레
These videos demonstrate the operation of similar deep well submersible pumps:
7. 유지관리
Regular maintenance ensures the longevity and optimal performance of your GREENCUT BAS370C pump.
- 청소: Periodically inspect the pump's intake for blockages from sediment or debris. Clean as necessary.
- 겨울철 : In areas prone to freezing temperatures, remove the pump from the water source, drain it completely, and store it in a dry, frost-free location.
- Cable and Hose Inspection: Regularly check the electrical cable and discharge hose for any signs of wear, damage, or leaks. Replace damaged components immediately.
- Non-Return Valve Check: If an external non-return valve is installed, periodically check its function to ensure it is preventing backflow effectively.
8. 문제 해결
펌프에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 펌프가 시작되지 않습니다 | No power supply; Faulty electrical connection; Motor overload. | Check power outlet and circuit breaker. Inspect all electrical connections in the control box. Allow motor to cool if overloaded. |
| 낮은 물 흐름 또는 압력 | Partial blockage in intake or discharge hose; Insufficient water level; Faulty non-return valve; Air in the system. | Check and clear any blockages. Ensure pump is fully submerged. Inspect and replace non-return valve if necessary. Bleed air from the system. |
| 펌프는 작동하지만 물이 나오지 않습니다. | Pump not submerged; Airlock; Suction hose leak; Impeller damage. | Ensure full submersion. Prime the pump if necessary. Check hose connections for leaks. Contact service if impeller is suspected to be damaged. |
| 펌프가 예기치 않게 정지됨 | Overheating; Low water level; Electrical fault. | Allow pump to cool. Ensure adequate water level. Check electrical connections and RCD. |
9. 보증 및 지원
For any warranty claims, technical assistance, or spare parts, please contact Greencut customer service or visit their official web대지.
Greencut Service & Support: www.greencut-tools.com
보증을 위해 구매 증빙서류를 보관하세요.
