1. 서론
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your TOMZN TOQ7e WiFi Smart Automatic Transfer Switch (ATS). Please read this manual thoroughly before installation and keep it for future reference.
The TOMZN TOQ7e is designed to automatically switch between two power sources, typically city power (Source A) and a generator or secondary power source (Source B), ensuring a continuous power supply to your electrical load. It features WiFi connectivity for smart control and monitoring via the EWelink application.
2. 안전 정보
Improper installation or operation can lead to serious injury or damage to the device. Always adhere to the following safety guidelines:
- 전문 설치 권장: 설치는 모든 지역 및 국가 전기 규정을 준수하는 자격을 갖춘 전기 기술자만 수행해야 합니다.
- 전원 분리: Always ensure that all power sources are disconnected before performing any installation, wiring, or maintenance.
- 권tage 및 전류 등급: Verify that the device's voltage and current ratings match your electrical system requirements.
- 적절한 접지: 감전을 방지하기 위해 장치가 제대로 접지되었는지 확인하십시오.
- 환경 조건: 기기를 과도한 습기, 먼지 또는 지정된 작동 범위를 벗어난 극한 온도에 노출시키지 마십시오.
- 보안 연결: Ensure all wire connections are tight and secure to prevent overheating and arcing.
3. 제품 오버view
The TOMZN TOQ7e ATS is a compact and intelligent device designed for reliable power transfer. It integrates automatic switching capabilities with smart home features.
그림 1: 전면 view of the TOMZN TOQ7e ATS, showing the manual/auto selector, indicator lights, and terminal connections.
Figure 2: Multiple TOMZN TOQ7e ATS units, illustrating various pole configurations and current ratings.
주요 구성 요소:
- Power Source A (City Power) Terminals: Connections for the primary power supply.
- Power Source B (Generator) Terminals: Connections for the secondary power supply.
- 부하 단자: Output connections to the electrical load.
- Manual/Auto Selector Switch: Allows selection between manual operation and automatic transfer mode.
- 표시등: Display the status of Source A, Source B, and the current power supply.
- 와이파이 모듈: Enables smart control and monitoring via the EWelink app.
4. 사양
| 특징 | 사양 |
|---|---|
| 모델 | TOQ7e |
| 정격 전류 | 63A, 100A, 125A (variant dependent) |
| 정격 볼륨tage | 220V / 380V 교류 |
| 기둥 | 2P, 3P, 4P (variant dependent) |
| 제어 유형 | Automatic, Manual, WiFi (EWelink) |
| 보호 기능 | Short Circuit, Overload |
| 하우징 소재 | Insulating, Flame-retardant, UV-resistant |
| 터미널 | 나사형 |
| 인증 | CE |
| 작동 주파수 | 50/60Hz |
| 크기(대략) | Refer to product packaging or specific model datasheet for precise measurements. |
5. 설치
경고: Ensure all power is disconnected before proceeding with installation. Installation must be performed by a qualified electrician.
5.1 장착
The TOMZN TOQ7e ATS is designed for DIN rail mounting.
- Select a suitable location within your electrical panel or enclosure that provides adequate ventilation and protection from environmental factors.
- Attach the ATS securely to a standard DIN rail by engaging the mounting clip at the bottom of the device.
그림 3: 하단 view of the TOMZN TOQ7e ATS, showing the DIN rail mounting clip for secure installation.
5.2 배선
Follow the wiring diagram provided with your specific product variant or consult a qualified electrician. The general wiring principle involves connecting Source A (City Power), Source B (Generator), and the Load to their respective terminals.
- 출처 A (시티 파워): Connect the main utility power lines to the 'Source A' input terminals.
- Source B (Generator/Secondary Power): Connect the generator or secondary power lines to the 'Source B' input terminals.
- 짐: Connect the electrical circuits or appliances you wish to power to the 'Load' output terminals.
- Ensure correct phase and neutral connections.
- Tighten all screw terminals firmly to prevent loose connections and potential hazards.
6. 사용 설명서
6.1 수동 조작
The ATS can be manually switched between power sources using the selector switch on the front panel.
- Ensure the selector switch is in the 'Manual' position.
- Rotate the switch to select either 'Source A' or 'Source B' to supply power to the load.
- Observe the indicator lights to confirm the active power source.
6.2 자동 작동
For automatic power transfer, set the selector switch to the 'Auto' position.
- When 'Source A' (City Power) is available, the ATS will automatically connect the load to Source A.
- If 'Source A' fails, the ATS will detect the outage and, after a pre-set delay, automatically switch the load to 'Source B' (Generator), provided Source B is available and stable.
- When 'Source A' is restored, the ATS will automatically switch the load back to Source A after a pre-set delay.
- Indicator lights will show the status of each source and which source is currently supplying power.
6.3 WiFi Connectivity and EWelink App
The TOMZN TOQ7e integrates with the EWelink app for remote monitoring and control.
- Download EWelink App: Download the EWelink app from your smartphone's app store (iOS or Android).
- 등록/로그인: Create an account or log in to your existing EWelink account.
- 장치 추가: Follow the in-app instructions to add a new device. This typically involves putting the ATS into pairing mode (refer to the device's specific pairing instructions, usually by pressing and holding a button) and connecting to your home WiFi network.
- 원격 제어 및 모니터링: Once connected, you can monitor the status of both power sources, view current power usage (if supported by the specific model), and remotely switch between manual and auto modes, or even trigger a manual transfer.
- 타이머 기능: Utilize the app's timer features to schedule power transfers or monitor events.
7. 유지관리
Regular maintenance ensures the longevity and reliable operation of your ATS.
- 정기 검사: Annually inspect the device for any signs of physical damage, loose connections, or discoloration.
- 청결: 기기에 먼지나 이물질이 없도록 하세요. 청소 시에는 부드럽고 마른 천을 사용하세요. 액체 세제는 사용하지 마세요.
- 단자 견고성: Periodically check and re-tighten all screw terminals to ensure secure electrical connections.
- 기능성 테스트: 전력 출력을 시뮬레이션하여 자동 전환 기능을 주기적으로 테스트하십시오.tage (e.g., by temporarily disconnecting Source A, if safe to do so and with proper precautions).
8. 문제 해결
If you encounter issues with your TOMZN TOQ7e ATS, refer to the following troubleshooting guide:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Device not switching automatically | Selector switch in 'Manual' position. One or both power sources unavailable/unstable. | Set selector to 'Auto'. Check power supply to Source A and Source B. Ensure generator is running and stable. |
| No power output to load | No active power source. Overload or short circuit tripped internal protection. Loose wiring. | Verify both Source A and Source B are active. Check for tripped circuit breakers upstream. Inspect and tighten all wiring connections. |
| WiFi 연결 문제 | Incorrect WiFi password. Device too far from router. Router issues. | Ensure correct WiFi password. Move device closer to router or use a WiFi extender. Restart router. Re-attempt pairing process. |
| 표시등이 작동하지 않음 | No power to the device. Faulty unit. | Check power supply. If power is present and lights are still off, contact support. |
이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원 센터 또는 자격을 갖춘 전기 기술자에게 문의하십시오.
9. 보증 및 지원
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the point of purchase or contact your seller directly. Ensure you have your product model number and purchase date available when contacting support.
