Thermaltake MINECUBE 360 Ultra All-in-One Liquid Cooler

소개

The Thermaltake MINECUBE 360 Ultra is an advanced all-in-one liquid cooling system designed for high-performance computing. It features a 360mm radiator, three ARGB fans, and a unique cube-shaped pump block with a 3.95-inch LCD display on four sides. This manual provides essential information for the proper installation, operation, and maintenance of your liquid cooler.

안전 정보

• 설치 또는 유지 보수를 하기 전에 컴퓨터의 전원을 완전히 차단하십시오.
• 손상을 방지하기 위해 구성품을 조심스럽게 다루십시오.
• Refer to your motherboard and PC case manuals for specific installation guidelines.
• Do not attempt to open the pump or radiator, as this may void the warranty and cause leaks.
• 어린이의 손이 닿지 않는 곳에 보관하세요.

패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• MINECUBE 360 Ultra All-in-One Liquid Cooler (Radiator, Pump/CPU Block, Tubing)
• SWAFAN EX120 ARGB Fans (x3)
• Mounting Hardware for Intel Sockets (LGA2066/2011-3/2011/1851/1700/1200/1156/1155/1151/1150)
• Mounting Hardware for AMD Sockets (AM5/AM4/AM3+/AM3/AM2+/AM2/FM2/FM1)
• Replacement Fan Blades
• Accessory Kit (Cables, Thermal Paste, etc.)
• 사용자 설명서

설정 및 설치

1. 라디에이터와 팬을 준비하세요

Attach the three SWAFAN EX120 ARGB fans to the 360mm radiator using the provided screws. Ensure the fan orientation is correct for your desired airflow (intake or exhaust). The SWAFAN EX120 ARGB fans feature a MagForce 2.0 magnetic connector for simplified wiring.

이미지: 앞면 view of the radiator with fans.

Image: Radiator with fans configured for exhaust airflow.

Image: Radiator with fans configured for intake airflow.

2. 라디에이터 설치

Mount the assembled radiator and fan unit into your PC case. Common mounting locations include the top, front, or side panels, depending on your case design. Secure the radiator using the appropriate screws.

3. CPU 소켓 준비

Select the correct mounting bracket for your CPU socket (Intel or AMD). Install the backplate (if required for your socket) and standoffs onto your motherboard. Apply a thin, even layer of thermal paste to the center of your CPU's integrated heat spreader (IHS).

4. Install the Pump/CPU Block

Carefully place the pump/CPU block onto the CPU, aligning the mounting holes with the standoffs. Secure the pump block with the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Avoid overtightening.

Image: Pump block with LCD showing system statistics.

Image: Pump block with LCD showing a graphical interface.

5. 케이블 연결

• 팬 전원: Connect the 4-pin PWM fan cables from the fans to the motherboard's CPU_FAN or AIO_PUMP headers, or to a fan controller.
• ARGB 조명: Connect the 3-pin (5V) ARGB cables to a compatible ARGB header on your motherboard or an ARGB controller.
• LCD 디스플레이: Connect the Micro-USB cable from the pump block to an available USB 2.0 (9-pin) header on your motherboard.

Image: Cooler installed in a PC case with ARGB lighting.

Image: Cooler installed in a PC case with purple ARGB lighting.

6. 소프트웨어 설치

Download and install the latest Thermaltake software (e.g., TT RGB Plus) from the official Thermaltake website. This software is required to customize the LCD display, control fan speeds, and manage ARGB lighting effects.

작동 지침

전원 켜기

After completing all connections, power on your computer. The cooler's fans and pump will begin operating, and the LCD display on the pump block will initialize.

LCD 디스플레이 기능

The 3.95-inch TFT-LCD display (720 x 720 pixels) on the pump block can show various system information, custom images, or animations. Use the Thermaltake software to configure the display content. You can monitor CPU temperature, GPU frequency, and other system parameters directly on the screen.

팬 및 펌프 제어

The fan speeds (500 - 2000 RPM) and pump speed (1,500 - 3,300 RPM) are controlled via PWM signals from your motherboard or through the Thermaltake software. Adjust these settings to balance cooling performance and noise levels according to your preferences.

유지

Cleaning the Radiator and Fans

Periodically clean dust from the radiator fins and fan blades to maintain optimal cooling performance. Use compressed air or a soft brush. For the SWAFAN EX120 ARGB fans, the fan blades can be removed without tools for thorough cleaning or to change airflow direction.

Checking Tubing and Connections

배관 및 연결부에 누출이나 손상 흔적이 있는지 육안으로 검사하십시오. 모든 케이블이 단단히 연결되어 있는지 확인하십시오.

문제 해결

• 전원이 들어오지 않거나 팬이 회전하지 않음: Check all power connections, especially the 4-pin PWM header on the motherboard. Ensure the pump is connected to a dedicated AIO_PUMP or CPU_FAN header.
• LCD 화면이 표시되지 않음: Verify the Micro-USB to USB (9-pin) cable is securely connected to both the pump block and the motherboard header. Ensure the Thermaltake software is installed and running.
• 냉각 성능이 좋지 않음: Check for dust buildup on the radiator and fans. Ensure the pump block is properly seated on the CPU with adequate thermal paste. Verify fan orientation for optimal airflow.
• ARGB 조명이 작동하지 않습니다: Confirm the 3-pin (5V) ARGB cable is correctly connected to a compatible header. Use the Thermaltake software to control lighting effects.

명세서

보증 및 지원

Thermaltake products are covered by a limited warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official Thermaltake website. For technical support, driver downloads, or further assistance, please visit the Thermaltake support page or contact their customer service.

써멀테이크 스토어: https://www.amazon.com/stores/Thermaltake/page/E7446300-D4D5-4D86-B99A-E6DBD017FB77