ACEBEAM K1 충전식 EDC AA 손전등 사용 설명서

1. 서론

The ACEBEAM K1 is a compact Everyday Carry (EDC) flashlight designed for versatility and reliability. It features three distinct light sources: a powerful white LED, a precise green beam, and a high-output UV light. This manual provides essential information for the safe and effective use of your K1 flashlight.

2. 주요 특징

• 세 가지 광원: Integrates a CREE XP-LR 6500K white LED (up to 1000 lumens, 223 meters throw), a 365nm UV light (up to 1000mW output), and a green beam (≤5mW, Class 3R).
• Dual Switching System: Features a rotary magnetic switch for easy mode selection between light sources and a tail switch for quick on/off and brightness adjustments.
• Rechargeable & Compatible: Comes with a USB-C rechargeable 14500 battery (1000mAh) and is also compatible with standard AA batteries for versatile power options.
• 내구성 있는 구조: Crafted from hard anodizing aircraft-grade AL6061-T6 aluminum alloy, offering 1.5-meter impact resistance and an IP68 waterproof and dustproof rating.
• 소형 및 휴대성: Weighs 2.73oz and measures 4.33 inches, making it easy to carry in a pocket or attach with the stainless steel clip.

Figure 1: The ACEBEAM K1 flashlight showcasing its compact design and multiple light sources.

3. 패키지 내용

포장을 풀 때 아래 나열된 모든 품목이 포함되어 있는지 확인하세요.

• 1 x ACEBEAM K1 Flashlight
• 1 x 14500 USB-C Rechargeable Li-ion Battery (1000mAh)
• 1 x USB-C 충전 케이블
• 1 x 라니어드
• 2 x 예비 O-링
• 1 x 사용자 설명서
• 1 x 보증 카드
• 자격증 1개

Figure 2: All items included in the ACEBEAM K1 product package.

4. 설정

4.1 배터리 설치

1. 손전등의 테일 캡을 푸십시오.
2. Remove the insulating film from the battery.
3. 14500 배터리의 양극(+) 부분이 손전등 헤드 쪽을 향하도록 삽입하십시오.
4. 테일 캡을 다시 단단히 조이십시오.

Figure 3: Battery installation and removal of insulating film.

4.2 배터리 충전

The included 14500 battery has a built-in USB-C port for convenient charging. Connect the USB-C charging cable to the battery and a power source. The indicator light on the battery will show red during charging and turn green when fully charged.

Figure 4: The 14500 battery features a built-in USB-C charging port.

5. 운영

5.1 전원 켜기/끄기

손전등을 켜거나 끄려면 후면 스위치를 완전히 누르십시오.

5.2 광원 전환

Rotate the magnetic switch on the flashlight head to cycle through the three light sources:

• 모드 1 : 백색광
• 모드 2 : 그린빔
• 모드 3 : 자외선

Figure 5: Rotate the magnetic switch to select between White Light, Green Beam, and UV Light.

5.3 밝기 조절

• 백색광 모드: While the white light is on, turn it off and then on again within 4 seconds to cycle through Low, Medium, and High brightness levels.
• 자외선 모드: While the UV light is on, turn it off and then on again within 4 seconds to cycle between High and Low brightness levels.

Figure 6: Tail switch functionality for on/off and brightness level changes.

5.4 Strobe Function

While in White Light Mode (Mode 1), rotate the magnetic switch to Mode 2 (Green Beam) and then back to Mode 1 within 0.3 seconds to activate the white light strobe function.

5.5 Green Beam for Pointing

The green beam provides precise targeting, useful for highlighting points in presentations, guiding remotely outdoors, or pinpointing issues during equipment maintenance.

Figure 7: The green beam is ideal for precise targeting and pointing.

5.6 UV Light for Detection

The 365nm UV light with 1000mW output reveals details invisible to the naked eye, assisting in authenticating items, inspecting for cleanliness, and nature observations.

Figure 8: The UV light reveals hidden details for various inspection tasks.

6. 사양

Figure 9: Detailed technical parameters for the ACEBEAM K1.

7. 유지관리

• Clean the threads and O-rings regularly to maintain the waterproof seal. Lubricate O-rings with silicone grease as needed.
• 손전등을 장기간 사용하지 않을 경우, 누액을 방지하기 위해 배터리를 제거하십시오.
• 손전등을 서늘하고 건조한 곳에 보관하십시오.
• Avoid direct eye exposure to the light beam, especially the green laser.
• Do not disassemble the sealed head to avoid damage to the flashlight and voiding the warranty.

8. 문제 해결

If your flashlight is not functioning correctly, please try the following steps:

• Ensure the battery is fully charged and correctly inserted with the positive (+) end towards the head.
• Check the tail cap and head for any loose connections. Tighten them firmly.
• 알코올 솜으로 배터리 접점과 나사산을 닦으십시오.
• If using an AA battery, ensure it is a fresh, high-quality alkaline or Ni-MH rechargeable battery. Note that AA batteries may not provide the full output of the included 14500 Li-ion battery.
• If the issue persists, please refer to the warranty information for support.

9. 보증 및 지원

9.1 보증 정책

• 15일 교체: Any quality defective lights can be replaced within 15 days of purchase.
• 60 월 보증 : ACEBEAM offers a 60-month warranty for problems developing with normal use for LED models.
• 12 월 보증 : Batteries, battery packs, chargers, remote switches, and other accessories are covered for 12 months.
• 제한된 평생 보증: For replacement parts beyond the warranty period, ACEBEAM charges for replacement parts.

Please keep your warranty card and contact authorized distributors for after-sale maintenance. Customer information is required to fill out if repair is needed.

9.2 고객 지원

For any questions or concerns regarding your ACEBEAM K1 flashlight, please contact ACEBEAM customer service. Refer to the contact information provided on the product packaging or the official ACEBEAM web대지.

10. 공식 제품 영상