중요한 안전 정보
Please read this entire instruction manual carefully before installing or using your Stelpro Ultra-Quiet Wall Convector Heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or property damage. Keep this manual for future reference.
- 이 히터는 다음을 위해 설계되었습니다. hardwired installation only이 제품은 플러그인 방식이 아닙니다.
- 이 히터 내장형 온도 조절 장치가 포함되어 있지 않습니다.. An external electronic wall thermostat (sold separately) is required for operation and temperature control. Mechanical thermostats are not compatible.
- Ensure the electrical supply matches the heater's requirements (240V or 208V).
- 설치는 모든 국가 및 지역 전기 규정에 따라 자격을 갖춘 전기 기술자가 수행해야 합니다.
- Do not install the heater near flammable materials or in areas where gasoline, paint, or other flammable liquids are stored or used.
- Maintain proper clearances from walls, furniture, and drapes as specified in the installation guide.
설정 및 설치
The Stelpro ASHC1502WCW convector heater is designed for surface-mount wall installation. For safe and proper operation, professional installation is highly recommended.
설치
The heater features a concealed mounting bracket and a back entry plate with cable clamps for a clean, secure installation. Ensure the mounting surface is flat and capable of supporting the heater's weight.
전기 연결
This unit requires a 240V or 208V hardwired electrical connection. It is crucial to connect the heater to a dedicated circuit with appropriate overcurrent protection. Refer to the wiring diagram provided with the product packaging for detailed electrical connection instructions.
Thermostat Requirement
As this heater does not have an integrated thermostat, an external electronic wall thermostat must be installed and wired to control the heater's operation. Ensure the chosen thermostat is compatible with 240V/208V electric heating systems.
작동 지침
Once properly installed and connected to an electronic wall thermostat, operating your Stelpro convector heater is straightforward.
- 전원 켜기: 히터에 전원을 공급하는 회로 차단기가 '켜짐' 위치에 있는지 확인하십시오.
- 온도 조절기 설정: Use your external electronic wall thermostat to set the desired room temperature. The heater will activate when the room temperature falls below the set point and deactivate once the set point is reached.
- 조용한 작동: This convector heater operates silently, providing consistent warmth without fan noise.
- 초기 사용: During the first few hours of operation, a slight odor may be emitted. This is normal and will dissipate quickly as manufacturing residues burn off. Ensure adequate ventilation during this period.
유지
Your Stelpro convector heater requires minimal maintenance to ensure optimal performance and longevity.
- 청소: 히터 외부를 부드러운 천으로 주기적으로 청소하십시오.amp cloth. Do not use abrasive cleaners or solvents. Ensure the heater is turned off and cool before cleaning.
- 먼지 제거: Use a vacuum cleaner with a brush attachment to remove dust from the air intake and discharge grilles. This helps maintain efficient airflow.
- 점검: Annually, inspect the heater for any signs of damage or loose connections. If any issues are found, contact a qualified electrician for inspection and repair.
- 방해하지 마십시오: Never block the air intake or discharge openings of the heater. This can lead to overheating and reduced efficiency.
문제 해결
If your Stelpro convector heater is not operating as expected, consult the following troubleshooting guide before contacting support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 히터가 켜지지 않습니다. | 전원 공급이 없습니다. 온도 조절기가 너무 낮게 설정되었습니다. Faulty wiring or thermostat. | 회로 차단기를 확인하십시오. 온도 조절기 설정을 높입니다. 자격을 갖춘 전기 기술자에게 문의하십시오. |
| 히터에서 충분한 열이 나오지 않습니다. | 방 크기가 난방 용량을 초과합니다. Airflow obstructed. 온도 조절 장치 교정 문제. | Ensure heater matches room size (up to 150 sq ft). 그릴 주변의 장애물을 치우세요. Recalibrate or replace thermostat. |
| 작동 중 이상한 냄새가 납니다. | Initial burn-off of manufacturing residues. 발열체에 먼지가 쌓였습니다. | Ensure ventilation; odor should dissipate. 히터를 유지보수 항목에 따라 청소하십시오. |
If the problem persists after attempting these solutions, contact Stelpro customer support or a qualified electrician.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 스텔프로 |
| 모델 번호 | ASHC1502WCW |
| 왓tage | 1500W(240V 기준) / 1125W(208V 기준) |
| 권tage | 240 볼트 |
| Amp에라 지 | 6.25 Amps |
| 제품 크기(D x W x H) | 3.94" x 28.63" x 17.56"(101mm x 727mm x 446mm) |
| 품목 무게 | 15.7파운드 |
| 난방 범위 | 최대 150제곱피트 |
| 특별 기능 | Energy Efficient, Fast Heating, Noiseless |
| 폼 팩터 | 내각 |
| 색상 | 하얀색 |
| 장착 유형 | 벽걸이형 |
| 연료 유형 | 전기 같은 |
| 실내/실외 사용 | 실내 |
| 한국어: | 626296203491 |
보증
The Stelpro Ultra-Quiet Wall Convector Heater (Model ASHC1502WCW) is backed by a comprehensive warranty:
- 5년 한정 보증 전체 단위에 대해.
- 평생 보증 발열체에 대하여.
- 3년 보증 전자 부품에 관하여.
보증 청구를 위해 구매 증빙 자료를 보관해 주십시오. 전체 보증 약관은 제품에 동봉된 설명서를 참조하거나 Stelpro 공식 웹사이트를 방문하십시오. web대지.
지원하다
For technical assistance, warranty inquiries, or to purchase replacement parts, please contact Stelpro customer service.
You can find more information and contact details on the official Stelpro web대지: Visit the Stelpro Store on Amazon
When contacting support, please have your model number (ASHC1502WCW) and proof of purchase readily available.
