1. 서론
Thank you for choosing the SEBSON Outdoor Motion Detector. This device is designed for reliable outdoor use, featuring an IP65 rating for weather resistance and a 240° infrared sensor. It is programmable for ignition duration, ambient brightness, and detection range, making it suitable for various lighting applications with both incandescent and LED bulbs. This manual provides essential information for safe installation, operation, and maintenance of your motion detector.
이미지 1: 앞면 view of the SEBSON Outdoor Motion Detector, showcasing its compact design and sensor lens.
2. 안전 지침
설치 및 작동 전에 이 안전 지침을 주의 깊게 읽어 주십시오. 이 지침을 따르지 않을 경우 감전, 화재 또는 기타 위험이 발생할 수 있습니다.
- 전기 설치: 설치는 현지 배선 규정에 따라 자격을 갖춘 전기 기술자가 수행해야 합니다.
- 전원 차단: Always disconnect the main power supply before performing any installation, maintenance, or repair work.
- 권tage: 공급 볼륨을 확인tage matches the detector's specified voltage(230볼트).
- 야외 사용: The device is IP65 rated for outdoor use, protecting against dust and water jets. Ensure all connections are properly sealed.
- 설치: Mount the detector securely on a stable wall surface.
- 어린이들: 포장재와 작은 부품은 어린이의 손이 닿지 않는 곳에 보관하세요.
3. 제품 오버view
The SEBSON Outdoor Motion Detector features three adjustable dials for precise control over its operation:
- 럭스: Adjusts the ambient brightness threshold (3-2000 LUX) at which the detector activates.
- 감각 : Controls the detection range (8-14 meters).
- 시간: Sets the duration (10 seconds to 15 minutes) for which the connected light remains on after motion is detected.
이미지 2: 클로즈업 view of the three adjustment dials (LUX, SENS, TIME) located on the underside of the motion detector.
4. 설정 및 설치
4.1 검출기 장착
The motion detector is designed for wall surface mounting. Choose a stable location that provides the desired detection coverage and is within the recommended mounting height.
- Disconnect the main power supply before starting installation.
- Separate the mounting base from the main unit.
- Mark the drilling points on the wall using the mounting base as a template.
- 구멍을 뚫고 적절한 벽 플러그를 삽입하십시오(필요한 경우).
- Secure the mounting base to the wall using screws. Ensure the 'UP' arrow on the base points upwards.
이미지 3: 후면 view of the mounting base, showing the 'UP' indicator and screw holes for wall attachment.
Image 4: Diagram illustrating the width of the mounting plate, which is 60 mm.
4.2 배선
This motion detector uses a 3-wire connection. Ensure all wiring is done with the power supply disconnected.
- Connect the Live (L) wire from the power supply to the 'L' terminal on the detector.
- Connect the Neutral (N) wire from the power supply to the 'N' terminal on the detector.
- Connect the Switched Live (L') wire from the detector to the Live terminal of your light fixture.
- Connect the Neutral wire from the power supply to the Neutral terminal of your light fixture.
- 모든 연결부가 단단히 고정되고 적절하게 절연되었는지 확인하십시오.
4.3 배치 고려 사항
Optimal performance depends on correct placement:
- 장착 높이: The recommended mounting height is between 1.80 meters and 2.50 meters for optimal detection.
- 감지 영역: The sensor has a 240° detection angle and a range of 8-14 meters. Position it to cover the desired area without unnecessary triggers.
- 장애물을 피하십시오: Do not mount the detector near large objects, trees, or walls that could obstruct the detection field.
- 환경적 요인: Avoid mounting near direct sunlight, heat sources (e.g., vents, outdoor units), or areas with constant movement (e.g., busy roads) to prevent false triggers.
Image 5: Detection area diagram, showing the 240° angle, maximum 14m range, and recommended mounting height of 1.80m to 2.50m.
이미지 6: 측면 view dimensions of the motion detector, indicating a length of 99mm and a height of 61mm.
5. 사용 설명서
After installation, restore power and adjust the settings using the three dials on the underside of the detector (refer to Image 2).
- LUX (Ambient Brightness): Turn the dial towards the 'sun' symbol for activation in brighter conditions (up to 2000 LUX) or towards the 'moon' symbol for activation only in darker conditions (down to 3 LUX).
- TIME (Ignition Duration): Rotate the dial to set how long the light remains on after motion is detected. Settings range from 10 seconds to 15 minutes.
- SENS (Detection Range): Adjust this dial to control the sensitivity and effective detection distance, from 8 meters to 14 meters. Test different settings to find the optimal range for your environment.
테스트: It is recommended to test the detector's settings during both day and night to ensure it operates as desired. You can set the LUX to maximum (sun symbol) for daytime testing of range and time duration, then adjust it to the desired ambient light level for normal operation.
6. 유지관리
The SEBSON Outdoor Motion Detector requires minimal maintenance.
- 청소: 센서 렌즈와 하우징을 주기적으로 부드러운 천으로 닦아주세요.amp 먼지와 오물을 제거하는 천. 연마성 세척제나 용제를 사용하지 마십시오.
- 점검: Regularly check the detector for any signs of damage, loose connections, or wear.
- 장애물: Ensure no new obstructions (e.g., growing plants, debris) are blocking the sensor's field of view.
7. 문제 해결
동작 감지기에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 움직임이 감지되어도 조명이 켜지지 않습니다. |
|
|
| 빛은 계속 켜져 있습니다. |
|
|
| 움직임이 없는데도 불이 켜집니다. |
|
|
| 탐지 범위가 너무 짧거나/길습니다. |
|
|
위 해결 방법을 시도해 본 후에도 문제가 지속되면 고객 지원 센터 또는 자격을 갖춘 전기 기술자에게 문의하십시오.
8. 사양
Technical specifications for the SEBSON Outdoor Motion Detector IR_OUT_IA:
| 특징 | 사양 |
|---|---|
| 상표 | 셉슨 |
| 모델 번호 | IR_OUT_IA |
| 전원 | 코드식 전기 |
| 권tage | 230 볼트 |
| 품목 무게 | 164그램(약 5.8온스) |
| 제품 치수 | 3.9 x 2.91 x 2.4인치(약 99 x 74 x 61mm) |
| 최대 범위 | 14 미터 |
| 감지 각도 | 240° |
| LUX Adjustment Range | 3 - 2000 LUX |
| 시간 지연 조정 | 10초 - 15분 |
| IP 등급 | IP65 |
| 최대 부하(백열전구) | 2000와트 |
| 최대 부하(LED) | 1000와트 |
| 장착 유형 | 벽걸이형 |
| 호환 장치 | 조명, 보안 시스템, 스마트 홈 허브 |
| 추천 용도 | Garden, Driveway, Garage |
9. 보증 및 지원
보증 정보 및 고객 지원은 구매 시 제공된 설명서를 참조하거나 판매점에 문의하십시오. 보증 청구를 위해서는 구매 증빙 자료를 보관하십시오.
