Dyness 51.2V 100Ah LiFePO4 배터리 사용 설명서 (모델 DL5.0C)

제품 끝view

Image: The Dyness 51.2V 100Ah LiFePO4 Battery, a deep cycle lithium iron phosphate battery module.

The Dyness 51.2V 100Ah LiFePO4 Battery (Model DL5.0C) is a high-capacity energy storage solution designed for various applications including off-grid, solar, and backup power systems. This battery module offers a nominal voltage of 51.2V and a capacity of 100Ah, providing 5.12kWh of energy. It features advanced communication capabilities, automotive-grade cell technology, and a robust Battery Management System (BMS) for enhanced safety and performance.

주요 특징

• Space-Saving Rack Design: Standard modular unit (5.12kWh) allows for easy parallel connection of up to 50 batteries for a 256kWh system. Supports wall-mount and floor-standing installations.
• 스마트 커뮤니케이션: Utilizes industrial-grade CAN bus or RS485 wired communication for compatibility with major inverter brands, ensuring stable data transmission and strong anti-interference capabilities.
• Automotive-Grade Cell Connection Technology: Features "Cells Contact System (CCS)" technology for integrated battery cell interconnection, enhancing spatial utilization, consistency, and electrical connection reliability.
• 실시간 모니터링: Equipped with a COM port for Wi-Fi signal booster, external data loggers, or displays supporting RS232 protocol. Monitors voltage, current, temperature, and protection status via smartphone. An LED indicator on the front panel displays State of Charge (SOC), operational status, and fault alarms.
• Upgraded 100A BMS & Grade-A EV Cells: Manufactured with premium Lithium Iron Phosphate (LiFePO4) cells for inherent safety and 4000+ long cycle life. The built-in BMS provides multiple protections against overcharge, over-discharge, over-current, and high/low temperatures, including cell balancing.

Image: Illustration of smart communication and real-time monitoring capabilities, including Wi-Fi, inverter/PC connection, and battery-to-battery communication.

이미지: 상세 view of the battery's front panel, highlighting the power switch, positive/negative sockets, ADD dip switches, SOC/RUN/ALM indicators, DRY contact, CAN/RS485/RS232 communication ports, and grounding point.

Image: Close-up of the internal automotive industrial-grade cell contact system (CCS) technology, emphasizing precise monitoring, enhanced battery safety, and space-saving design.

Image: Visual representation of the wall-mounted and floor-mounted installation options for the Dyness 51.2V 100Ah LiFePO4 Battery, highlighting its space-saving design for home energy storage.

공식 제품 영상

Video: An official product video from Dyness US providing an overview of the Dyness 51.2V 100Ah LiFePO4 Battery, showcasin그 특징과 디자인.

상자 안에 무엇이 들어있나요?

이미지: 제품 패키지에 포함된 모든 품목의 시각적 표현입니다.

The Dyness 51.2V 100Ah LiFePO4 Battery package includes the following items:

• Dyness 51.2V 100Ah LiFePO4 Battery Module
• 사용자 설명서
• Positive Power Cable (Red)
• Negative Power Cable (Black)
• Communication Parallel Cable
• Communication Cable to Inverter
• 접지선
• Battery Brackets (for wall-mount/floor-standing)
• 고정 브래킷
• 확장 볼트
• 포지셔닝 골판지

설정 및 설치

Proper setup and installation are crucial for the safe and efficient operation of your Dyness LiFePO4 battery. Please follow these guidelines carefully.

장착 옵션

The Dyness battery offers flexible installation options to suit your space requirements:

• 벽걸이: Securely attach the battery to a sturdy wall using the provided battery brackets and fixing hardware. Ensure the wall can support the battery's weight (approximately 110 pounds).
• 바닥에 세워 놓는 형태: Place the battery on a flat, stable surface. The design allows for stacking multiple units.

Image: An illustration demonstrating how multiple Dyness batteries can be connected in parallel for flexible energy expansion solutions, minimizing wiring complexity.

병렬 연결

For increased capacity, multiple Dyness battery modules can be connected in parallel. The system supports up to 50 batteries in parallel, allowing for a total energy storage system of up to 256kWh. Use the provided parallel cables for secure connections.

인버터에 연결하기

Connect the battery to your inverter using the appropriate communication and power cables. The battery supports industrial-grade CAN bus or RS485 wired communication for compatibility with major inverter brands.

접지

Ensure the battery is properly grounded using the provided ground wire to prevent electrical hazards.

Initial Power-On and Display Check

After installation, press the power button on the battery. The integrated display will show basic information and allow you to navigate through various settings and statuses.

작동 지침

The Dyness battery features an intuitive interface for monitoring and configuration.

디스플레이 네비게이션

Use the MENU, ENTER, NEXT, and ESC buttons on the front panel to navigate the display:

• Pack Info: View 볼륨과 같은 실시간 데이터tage, current, capacity, and temperature.
• Pack Status: Check the battery's operational status, protection count, and MOSFET status.
• Pack Para: Access pack parameters (some content may not be settable directly from the display).
• Pack Set: Configure communication settings for RS485 and CANBus protocols.

통신 설정

To configure communication protocols for your inverter:

1. Navigate to 'Pack Set' on the display.
2. Select either 'RS485' or 'CANBus' depending on your inverter's protocol.
3. Choose the specific inverter brand/model from the list (e.g., PYLON, GROWATT, Voltronic, LXP for RS485; LXP, DEYE, SOFAR, GINLONG, SMA, MUST for CANBus).
4. Press ENTER to confirm your selection. The display will show 'SET OK!'.

Wi-Fi App Monitoring

The COM port allows connection to a Wi-Fi signal booster or external data loggers/displays supporting the RS232 protocol. This enables remote monitoring of battery health and performance parameters (voltage, current, temperature, protection status) via a smartphone application.

유지

To ensure optimal performance and longevity of your Dyness LiFePO4 battery, adhere to the following maintenance guidelines:

• 정기 검사: Periodically check all cable connections for tightness and signs of wear or corrosion.
• 온도 관리: Operate the battery within its specified working temperature ranges. For charging, the recommended temperature is 0°C to 55°C. For discharging, it is -20°C to 60°C. For storage, maintain temperatures between 10°C and 35°C.
• 청소: 배터리 장치를 깨끗하게 유지하고 먼지와 이물질이 들어가지 않도록 하십시오. 청소할 때는 마른 부드러운 천을 사용하십시오.
• 펌웨어 업데이트: 제조사 확인해보세요 website or app for any available firmware updates to ensure your battery's BMS is running the latest version.

문제 해결

If you encounter issues with your Dyness LiFePO4 battery, consider the following basic troubleshooting steps:

• 전원/디스플레이 꺼짐: Check the main power switch and ensure all connections are secure. Verify the input voltage from the charging source.
• 오류 알람: Refer to the LED indicator on the front panel for fault alarms. Consult the user manual for specific fault codes and their meanings.
• 의사소통 문제: Ensure communication cables are correctly connected to the appropriate ports (RS485, CAN, RS232) and that the inverter communication protocol is correctly set in the 'Pack Set' menu.
• Low Capacity/Performance: Verify that the battery is operating within the recommended temperature ranges for charging and discharging. Check for any error messages on the display.
• Parallel System Imbalance: For multi-module parallel systems, ensure the master battery BMS is aggregating data correctly. Check individual module statuses if an imbalance is suspected.

문제가 지속될 경우 Dyness 고객 지원팀에 문의하십시오.

명세서

보증 및 지원

Dyness batteries come with a 10년 보증. We are committed to providing excellent customer service and will assist with any issues within 24 hours.

A return or replacement is applicable if there is any verified technical issue within 30 days of purchase, even if the item is marked as non-returnable by the retailer. Please feel free to contact us should you have any questions or require support.

For customer support, please refer to the contact information provided in your product packaging or visit the official Dyness web대지.