Antec VCX20M RGB Elite mATX 미니 타워 PC 케이스 사용 설명서

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your Antec VCX20M RGB Elite mATX Mini Tower PC Case. Please read this guide thoroughly before beginning assembly to ensure proper setup and optimal performance. This PC case is designed for compact builds, offering efficient cooling and a panoramic view of your components.

Figure 1.1: Antec VCX20M RGB Elite Mini Tower PC Case in a typical desktop setup.

2. 주요 특징

• Compact Design & Efficient Heat Dissipation: Optimized for compact builds, featuring enhanced airflow for superior cooling performance.
• 이중 챔버 설계: Ensures independent cooling for the CPU/GPU on the left side and the PSU/Drives on the right side.
• 파노라마 270° View: Seamless left and front glass panels provide an unobstructed view 내부 구성 요소.
• 대형 공기 흡입구를 이용한 수직 냉각: Large amounts of air are drawn in through the mesh on the bottom and side, facilitating heat dissipation and protecting hardware.
• Pre-installed 5 x 120mm RGB Fans: Includes one 120mm RGB fixed mode fan at the rear, two 120mm RGB fixed mode fans on the side, and two 120mm RGB fixed mode reverse fans at the bottom.
• 높은 호환성: Supports mATX motherboards and various component sizes.
• 튼튼한 구조: Constructed with quality materials for longevity.

Figure 2.1: The compact design of the Antec VCX20M RGB Elite, engineered for efficient heat dissipation.

Figure 2.2: Dual chamber design for optimized cooling of CPU/GPU and PSU/Drives.

Figure 2.3: Panoramic 270-degree view provided by the seamless glass panels.

Figure 2.4: Illustration of vertical cooling and significant air intake for optimal thermal performance.

Figure 2.5: Location and type of the five pre-installed 120mm RGB fans.

3. 설정 및 설치

Follow these general steps for installing components into your Antec VCX20M RGB Elite PC Case. Always refer to your component manuals for specific installation details.

1. 사례 준비: Carefully remove the side and front glass panels. Place the case on a stable, flat surface.
2. 마더보드 설치: Secure your mATX motherboard onto the standoffs provided. Ensure all screws are tightened appropriately.
3. 전원 공급 장치(PSU) 설치: Mount the PSU in its designated compartment, typically in the right chamber of the dual-chamber design. Route cables through the provided cutouts.
4. 저장 드라이브 설치: Mount your SSDs and HDDs in the designated drive bays. Connect power and data cables.
5. 그래픽 카드(GPU) 및 확장 카드 설치: Insert your GPU and any other expansion cards into the PCIe slots on the motherboard. Secure them with screws.
6. 전면 패널 케이블 연결: Connect the front panel I/O cables (USB, audio, power, reset, LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for header locations.
7. 케이블 관리 : Utilize the cable routing options and tie-down points to manage cables neatly, improving airflow and aesthetics.
8. 패널을 다시 부착하세요: Once all components are installed and cables are managed, carefully reattach the glass panels.

4. 사용 설명서

This section details the basic operation of your PC case, focusing on the front I/O panel and RGB lighting control.

4.1 전면 I/O 패널

전면 I/O 패널은 필수 포트 및 제어 장치에 편리하게 접근할 수 있도록 설계되었습니다.

Figure 4.1: Front I/O Panel layout and functions.

• 전원 버튼: Press to turn the computer on or off.
• LED 켜짐/꺼짐 버튼: Controls the RGB lighting of the pre-installed fans. Press to cycle through different lighting modes or turn off the LEDs.
• USB 2.0 포트(x1): USB 2.0 호환 장치를 연결합니다.
• MIC/HD-AUDIO Jack: 헤드폰과 마이크를 연결하세요.
• USB 3.0 포트(x1): Connect USB 3.0 compatible devices for faster data transfer speeds.

4.2 RGB 팬 제어

The pre-installed RGB fans are controlled via the dedicated LED On/Off button on the front I/O panel. Each press cycles through various pre-set lighting effects. There is no software control for these fixed-mode RGB fans; all adjustments are made directly through the button.

5. 유지관리

정기적인 유지 관리는 PC 케이스의 수명과 최적의 성능을 보장하는 데 도움이 됩니다.

• 먼지 청소: Periodically clean dust filters and internal components using compressed air or a soft brush. Ensure the system is powered off and unplugged before cleaning.
• 외부 청소: Wipe the exterior surfaces, including glass panels, with a soft, damp 천으로 닦으십시오. 마감재에 흠집이 생길 수 있는 연마성 세척제는 사용하지 마십시오.
• 팬 검사: Check fan blades for dust buildup and ensure they spin freely. Clean as necessary.

6. 문제 해결

이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.

• 전원 없음: Ensure the PSU is properly connected to the motherboard and wall outlet. Check all front panel power switch connections to the motherboard.
• 팬이 회전하지 않음/RGB가 작동하지 않음: Verify that all fan power cables and RGB cables are securely connected to the motherboard or fan controller. Ensure the LED On/Off button is pressed to activate RGB modes.
• USB 포트가 작동하지 않음: Check that the USB headers from the front panel are correctly connected to the motherboard.
• 오디오 잭이 작동하지 않습니다: Ensure the HD-AUDIO cable from the front panel is correctly connected to the motherboard's audio header. Verify audio drivers are installed.
• 과열: Ensure proper airflow by checking for dust buildup on fans and filters. Verify that all fans are operating correctly. Ensure components are not obstructing airflow.

7. 사양

8. 보증 및 지원

Antec products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Antec website. For technical support, please contact Antec customer service through their official channels. Keep your proof of purchase for warranty claims.