uwant Wet Dry Vacuum Cleaner D600 Instruction Manual

1. 서론

The uwant Wet Dry Vacuum Cleaner D600 is an all-in-one cleaning solution designed for hard floors. It combines vacuuming and mopping functionalities, featuring advanced self-cleaning, odor removal, and efficient drying capabilities. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new appliance.

2. 주요 특징

• UWANT Push-in Design: Effortlessly docks into the base station for convenient storage and charging without leaving water marks.
• Triple Odor Removal: Features dual odor-removal sticks to keep water odor-free for up to 7 days and an IPX6+ washable roller brush with 100℃ hot water and air sterilization.
• Smart RGB Self-Cleaning Base Station: Provides one-stop cleaning with color-coded lights for dust cleaning (green), deep cleaning (blue), UV-C sterilization (purple), and infrared-assisted hot air drying (red).
• Lower than 13cm Lay-Flat: Designed to reach under low furniture like sofas and beds, ensuring no missed spots.
• 23000Pa Strong Suction with 3 Modes: Includes Smart Cleaning Mode (AI-adjusted suction), MAX mode (for tough stains), and Dry mode (for dry debris without water).
• Triple Water Levels and 50-Minute Runtime: Offers three water levels for different cleaning needs and a long-lasting battery for up to 280㎡ coverage. Its 3-side design cleans close to walls.
• 0 Gravity Handle: Ergonomically designed for easy operation with minimal wrist strain, adapting to different heights and angles.

3. 상자 안에 무엇이 들어있나요?

Your uwant D600 package includes the following components:

• uwant Wet Dry Vacuum Cleaner D600 main unit
• Self-cleaning base station
• 전원 어댑터
• 2 x Roller brushes (one pre-installed, one spare)
• 2 x HEPA filters (one pre-installed, one spare)
• 세척액
• 청소용 브러시
• 사용자 설명서

Figure 1: uwant D600 Wet Dry Vacuum Cleaner and included accessories.

4. 설정

1. 손잡이 조립: 손잡이를 청소기 본체에 딸깍 소리가 나면서 제자리에 단단히 고정될 때까지 삽입하십시오.
2. Place the Base Station: Position the self-cleaning base station on a flat, dry surface near a power outlet.
3. 전원 연결: 전원 어댑터를 베이스 스테이션에 연결한 다음 벽면 콘센트에 꽂으세요.
4. 장치 충전: Place the vacuum cleaner onto the base station. The push-in design allows for easy docking. The unit will begin charging automatically.
5. 깨끗한 물 탱크를 채우십시오: Remove the clean water tank from the main unit. Fill it with clean water and add the recommended amount of uwant Deep Cleaning Solution (30ml per 1 liter of water). Reattach the tank securely.

5. 사용 설명서

전원 켜기/끄기 및 모드 선택

• 전원 켜기: Press and hold the power button on the handle to turn on the vacuum cleaner.
• 모드 선택: Use the mode button to cycle through Smart Cleaning Mode, MAX mode, and Dry mode. The digital display will indicate the current mode.
• 전원 끄기 : 전원 버튼을 길게 눌러 장치를 끕니다.

수위 조절

The vacuum cleaner offers three water levels to suit different cleaning needs:

• 저수위: Ideal for light dust, hair, and minor puddles on wooden floors.
• Medium Water: Suitable for tile and hard floors, effectively clearing food debris and daily messes.
• 밀물: Provides maximum power for dried spills, sauces, and stuck-on grime.

Figure 2: Three adjustable water levels for varied cleaning tasks.

Lay-Flat and Edge Cleaning

• 180° 완전히 펼칠 수 있는 디자인: The vacuum can lay almost completely flat (lower than 13cm) to easily clean under furniture.
• 삼중 모서리 청소: The unique design allows for thorough cleaning along walls and into corners, leaving no dirt behind.

Figure 3: The 180° lay-flat design allows access to low-clearance areas.

Figure 4: The 3-edge design ensures thorough cleaning along edges and corners.

6. 유지관리

Smart RGB Self-Cleaning Base Station

After each use, return the vacuum cleaner to its base station. The Smart RGB Self-Cleaning Base Station will automatically initiate a cleaning cycle for the roller brush and internal components. The process involves four stages indicated by different light colors:

• 녹색불: Basic dust cleaning.
• 블루 라이트: Deep cleaning of the roller.
• 보라색 빛 : UV-C sterilization.
• 빨간불: Infrared-assisted hot air drying (100℃) for 100% dry and clean results.

Figure 5: The base station's RGB lights indicate the self-cleaning stage.

Cleaning the Dirty Water Tank and Roller Brush

• Empty Wastewater: Regularly empty the dirty water tank. The integrated deodorizer stick helps keep the wastewater odor-free for up to 7 days.
• 헹굼 구성품: The roller brush and its motor are IPX6+ waterproof, allowing for direct rinsing under water to prevent bacteria buildup. The base station tray is also removable for easy cleaning.

Figure 6: The triple odor removal system includes deodorizer sticks and a washable roller brush.

7. 문제 해결

• 세척 성능이 좋지 않음: Ensure the clean water tank is filled with water and cleaning solution. Check if the dirty water tank is full and needs emptying. Clean the roller brush and filter regularly.
• 불쾌한 냄새: Utilize the deodorizer sticks in the dirty water tank. Ensure the roller brush and all removable parts are thoroughly cleaned and dried after use. Run the full self-cleaning cycle with hot air drying.
• 감소된 흡입: Check for blockages in the suction path or the roller brush area. Ensure the filter is clean and properly installed.
• 배터리가 충전되지 않음: Verify that the vacuum cleaner is correctly docked in the base station and the power adapter is securely plugged into a working outlet.

8. 사양

9. 보증 및 지원

The uwant Wet Dry Vacuum Cleaner D600 comes with a 1-Year Whole Machine Warranty. For any inquiries or assistance, 7×24 hour after-sales service is provided to offer round-the-clock support.

10. 제품 비디오