arboleaf Mini Massage Gun with Heat - Instruction Manual

소개

Thank you for choosing the arboleaf Mini Massage Gun with Heat. This device is designed to provide targeted muscle relief through percussion massage and optional heat therapy. Please read this manual thoroughly before use to ensure safe and effective operation.

안전 정보

• Use only on skin and muscle, not on bones or joints.
• Avoid use on injured or inflamed areas.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• 잠자거나 목욕하는 동안에는 사용하지 마십시오.
• 사용하는 사이에 장치를 식히십시오.
• 건조한 곳에 보관하세요.
• 극한의 온도나 직사광선에 노출시키지 마십시오.
• Follow the instructions provided with the device.

제품 끝view

The arboleaf Mini Massage Gun is a compact, handheld percussion massager featuring a heated aluminum head and multiple silicone attachments for versatile use. It is designed for muscle relaxation and recovery.

Figure 1: arboleaf Mini Massage Gun with included attachments and carrying case.

구성 요소:

• Massage Gun Unit: The main device housing the motor and battery.
• Heated Aluminum Head: One specialized head designed for efficient heat transfer to loosen muscles.
• Soft Silicone Heads (3 types):
  • Ball Head: For large muscle groups.
  • U-Shaped Head: For spine and neck areas.
  • Bullet Head: For deep tissue, joints, and trigger points.
• 운반 케이스: A compact case for storage and travel.
• USB-C 충전 케이블: 기기를 충전합니다.

Figure 2: The four specialized massage heads: Heated Head, Ball Head, U-Shaped Head, and Bullet Head.

설정

1. 장치 충전

Before first use, fully charge the massage gun. Connect the provided USB-C charging cable to the charging port located at the bottom of the handle and to a compatible USB power adapter (not included). The battery indicator lights will illuminate to show charging progress. A full charge provides up to 8 hours of use.

Figure 3: USB-C charging port and battery indicator lights on the arboleaf Mini Massage Gun.

2. 마사지 헤드 부착

To attach a massage head, align the head with the opening on the device and push firmly until it clicks into place. To remove, pull the head straight out. Ensure the device is powered off before changing attachments.

작동 지침

1. 전원 켜기/끄기

• Press and hold the power button (located at the bottom of the handle) for 2 seconds to turn the device ON. It will start at Speed Level 1.
• To turn OFF, press and hold the power button for 2 seconds.

2. 속도 설정

The device features 5 speed settings (1700 to 3200 RPM) for customized relief. After powering on, short press the power button to cycle through the speed levels:

• Level 1 (1700 RPM): Warm-up & Relaxation
• Level 2 (2200 RPM): Release Daily Tension
• Level 3 (2700 RPM): Reduce Muscle Soreness
• Level 4 (3200 RPM): Deep Tissue Relief
• Level 5 (Adaptive Pressure Control): Automatically adjusts intensity based on applied pressure.

Figure 4: Visual representation of the 5 speed settings and their corresponding uses.

3. Heat Function Activation

The heated aluminum head provides soothing warmth. To activate the heat function, ensure the heated head is attached. The heat function is integrated into the head itself and can be activated via its own controls (refer to specific instructions for the heated head if separate). The soothing warmth quickly loosens tight muscles and eases deep tension.

Figure 5: The heated aluminum head in operation, showing its orange glow indicating heat.

4. 응용 기술

Apply the massager gently to the target muscle area. Use circular or up-and-down motions. Avoid direct contact with bones, joints, and injured or inflamed areas. The device is suitable for use on the neck, shoulders, back, arms, and legs.

5. 자동 차단

For safety and to prevent overuse, the device features a 15-minute automatic pause function. It will automatically turn off after 15 minutes of continuous operation.

유지

1. 청소

Wipe the device and attachments with a slightly damp 옷감. 연마성 세제를 사용하거나 장치를 물에 담그지 마십시오.

2. 보관

Store the massage gun and its accessories in the provided carrying case in a cool, dry place away from direct sunlight and extreme temperatures.

문제 해결

If the device experiences unexpected behavior, such as intermittent shut-off despite showing a full charge, ensure the battery is indeed fully charged. If issues persist, contact customer support.

명세서

공식 제품 영상

보증 및 지원

For warranty information or product support, please refer to the contact details provided in your product packaging or visit the official arboleaf web대지.