소개
This manual provides detailed instructions for the assembly, operation, and maintenance of your Polibi Full Size Upholstered Platform Bed. Please read all instructions carefully before assembly and use to ensure safe and proper functionality of the product.
안전 정보
경고: 이러한 안전 지침을 따르지 않을 경우 심각한 부상이나 제품 손상이 발생할 수 있습니다.
- 조립에 필요한 모든 부품은 어린이의 손이 닿지 않는 곳에 보관하십시오.
- 사용 전에 모든 볼트와 나사가 단단히 조여졌는지 확인하십시오. 정기적으로 점검하고 필요하면 다시 조이십시오.
- Do not exceed the maximum weight capacity: 600 lbs for the main bed, 250 lbs for the trundle.
- 평평하고 평평한 표면에서만 사용하십시오.
- 침대 위에서 서거나 뛰지 마세요.
- Exercise caution when extending or retracting the trundle bed to avoid pinching.
- Ensure electrical connections for the charging station are properly installed and not overloaded. Disconnect power before cleaning or if any damage is observed.
패키지 내용
Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact Polibi customer support.
- 패브릭 헤드보드 및 사이드 레일
- Bed Slats and Support Legs
- Trundle Bed Frame and Slats
- 일체형 책상 및 수납 선반
- Charging Station Unit (USB ports and outlets)
- 조립용 하드웨어(나사, 볼트, 육각 렌치)
- 사용 설명서
설정 및 조립
Assembly typically requires two adults. Please follow the steps below in sequence.
1단계: 구성 요소 풀기 및 식별
Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches. Refer to the parts list in your included manual to identify each component.
이미지 1: 이상view of the Polibi Full Size Upholstered Platform Bed, showcasing the main bed, integrated desk, storage shelves, and charging station.
2단계: 메인 침대 프레임 조립
Connect the headboard, footboard, and side rails using the provided hardware. Ensure all connections are snug but do not overtighten until all parts are aligned.
Image 2: The main bed frame structure with wooden slats in place, ready for mattress placement.
3단계: 침대 프레임 설치
Evenly space and secure the wooden bed slats across the frame. This provides support for your mattress. Ensure all slats are firmly attached to prevent movement.
Step 4: Assemble the Integrated Desk and Storage
Attach the desk and storage shelf components to the main bed frame as indicated in the detailed assembly diagram. These sections are designed to integrate seamlessly with the bed's structure.
이미지 3: 상세 view of the integrated desk, storage shelves, and the built-in charging station with USB ports and power outlets.
Step 5: Install the Charging Station
Carefully insert the charging station unit into its designated slot on the desk/storage component. Ensure it is flush and secure. Connect the power cord to a wall outlet after the bed is fully assembled and positioned.
Step 6: Assemble the Trundle Bed
Assemble the trundle bed frame and install its slats. The trundle is designed to slide underneath the main bed. Ensure the wheels are properly attached for smooth operation.
Image 4: The Polibi bed with the trundle frame visible, showing how it slides out from underneath the main bed.
7단계: 최종 조임 및 배치
Once all components are assembled, go back and securely tighten all bolts and screws. Position the bed in its desired location. Plug in the charging station.
Image 5: Dimensional diagram illustrating the overall length (88.5"), width (66.5"), and height (29.5") of the Polibi bed.
작동 지침
트런들 침대 사용하기
To extend the trundle bed, gently pull the handle located on the front panel of the trundle. The trundle will roll out smoothly on its wheels. To retract, push the trundle back underneath the main bed until it is fully concealed.
Image 6: The Polibi bed with the trundle fully extended, demonstrating its functionality as an additional sleeping space.
충전 스테이션 사용
Once the bed is assembled and the charging station is plugged into a wall outlet, you can use the two standard AC outlets and two USB ports to power or charge your electronic devices. Ensure devices are compatible with the provided power output.
Utilizing the Desk and Storage Shelves
The integrated desk provides a convenient surface for laptops, books, or other items. The storage shelves offer space for organizing personal belongings, books, or decorative items. Distribute weight evenly on shelves.
유지
- 청소: 패브릭 소재의 경우, 얼룩이 묻었을 때 부드럽게 부분적으로 닦아주세요.amp cloth and mild detergent. Avoid harsh chemicals. For wooden or MDF surfaces, wipe with a dry or slightly damp 옷감.
- 하드웨어 검사: 모든 볼트와 나사가 단단히 조여져 있는지 정기적으로 점검하세요. 안정성을 유지하기 위해 필요에 따라 다시 조이세요.
- 트런들 메커니즘: Keep the trundle wheels and tracks free of debris to ensure smooth operation.
- 전기 부품: Ensure the charging station is kept dry. Do not attempt to repair damaged electrical components; contact a qualified technician or customer support.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 침대가 불안정하거나 흔들거립니다. | 느슨한 하드웨어. | 모든 볼트와 나사를 확인하고 조이십시오. 침대가 수평인 표면에 놓여 있는지 확인하십시오. |
| 트런들이 부드럽게 미끄러지지 않습니다. | Debris in tracks, damaged wheels, or uneven floor. | Clean tracks. Inspect wheels for damage. Ensure the bed is on a level surface. |
| 충전소가 작동하지 않습니다. | 플러그가 꽂혀 있지 않음, 전원이 꺼짐tage, or faulty unit. | Ensure the power cord is securely plugged into a working wall outlet. Check circuit breaker. If issues persist, contact customer support. |
| 조립 중 부품이 누락되었습니다. | 포장 오류. | Contact Polibi customer support with your purchase details and a list of missing parts. |
명세서
- 상표: 폴리비
- 모델: B0FM3XGX96
- 크기: 가득한
- 제품 크기(길이 x 너비 x 높이): 88.5인치 x 66.5인치 x 29.5인치
- 재료: Pine Wood + MDF, Upholstered (Velvet Fabric, High-Density Foam)
- 최대 하중 용량(메인 침대): 600파운드
- 적재 용량(트런들): 250파운드
- 특별 기능: Integrated Charging Station (2 AC outlets, 2 USB ports), Storage Shelves, Pull-out Trundle Bed, Desk
- 필요한 조립: 예
보증 및 지원
For warranty information, missing parts, or technical assistance, please contact Polibi customer support. Keep your purchase receipt and model number (B0FM3XGX96) handy for faster service.
Polibi Customer Support: Refer to the contact information provided with your purchase or visit the official Polibi web대지.
