Antec VX320 ARGB ATX Mid Tower PC Case User Manual

1. 서론

Thank you for choosing the Antec VX320 ARGB ATX Mid Tower PC Case. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case. Please read this manual thoroughly before beginning installation to ensure correct assembly and to maximize the performance and longevity of your system.

Image 1.1: The Antec VX320 ARGB Mid Tower PC Case, showcasing its design and ARGB lighting in a typical desktop setup.

2. 주요 특징

• 높은 공기 흐름 설계: Features a mesh front panel and multiple ventilation points for superior cooling performance.
• ARGB 조명: Equipped with four pre-installed ARGB fans (3 front, 1 rear) for customizable illumination.
• 강화 유리 측면 패널: 명확한 제공 view of internal components and enhances aesthetic appeal.
• 광범위한 호환성: Supports ATX, Micro-ATX, and Mini-ITX motherboards, along with ample space for GPUs and storage drives.
• User-Friendly I/O Panel: Conveniently located ports including USB 3.0, USB 2.0, and audio jacks.

Image 2.1: The VX320 ARGB case highlighting its unique design and effective heat dissipation capabilities through its ventilated front grille and tempered glass side panel.

이미지 2.2: 자세한 view of the stylish mesh front panel, designed to maximize airflow for optimal cooling efficiency.

Image 2.3: Illustration of the high-airflow paths within the case, demonstrating how air intakes at the front contribute to efficient heat dissipation.

3. 패키지 내용

설치를 진행하기 전에 패키지에 모든 구성품이 들어 있는지 확인하십시오.

• Antec VX320 ARGB ATX Mid Tower PC Case
• Pre-installed 120mm ARGB Fans (3 front, 1 rear)
• 부속품 상자 (나사, 케이블 타이, 스탠드오프)
• 사용 설명서 (본 문서)

4. 설정 및 설치

Follow these steps for proper installation of your components into the Antec VX320 ARGB PC Case.

4.1 사건 준비

1. 케이스를 평평하고 안정적인 표면에 놓으십시오.
2. Remove the tempered glass side panel by unscrewing the thumb screws at the rear and carefully sliding it off.
3. Remove the opposite metal side panel by unscrewing the thumb screws and sliding it off.

4.2 마더 보드 설치

1. (메인보드에 미리 부착되어 있지 않은 경우) I/O 쉴드를 케이스 후면 개구부에 설치하십시오.
2. Align your ATX, Micro-ATX, or Mini-ITX motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's screw holes.
3. 제공된 나사로 마더보드를 고정합니다.

4.3 전원 공급 장치(PSU) 설치

1. 케이스 뒷면 하단에서 PSU 장착 영역을 찾으세요.
2. 파워서플라이를 케이스 후면에서 지정된 베이에 밀어 넣으세요.
3. 케이스 외부 후면에서 나사로 PSU를 고정합니다.

4.4 저장 드라이브 설치

Refer to your specific drive type (2.5" SSD/HDD or 3.5" HDD) for appropriate mounting locations within the case.

4.5 그래픽 카드 및 확장 카드 설치

1. 케이스 뒷면에서 필요한 PCIe 슬롯 커버를 제거합니다.
2. 그래픽 카드나 다른 확장 카드를 마더보드의 PCIe 슬롯에 삽입합니다.
3. 카드를 나사로 고정합니다.

4.6 Connecting Front I/O Panel Cables

Connect the cables from the case's front I/O panel to the corresponding headers on your motherboard. These include:

• 전원 스위치(PWR SW)
• 리셋 스위치(RESET SW)
• Power LED (PLED +/-)
• HDD LED (HDD LED)
• USB 3.0 헤더
• USB 2.0 헤더
• HD Audio Header (AUDIO)
• LED Control Button (connects to ARGB controller or motherboard ARGB header)

Image 4.1: The front I/O panel, showing the location of USB 3.0, USB 2.0, audio jacks, LED control, reset, and power buttons. Ensure these are correctly connected to your motherboard.

4.7 Fan and ARGB Connections

The VX320 ARGB comes with four pre-installed ARGB fans. Connect their power cables to your motherboard's fan headers or a fan controller, and their ARGB cables to a compatible ARGB controller or motherboard ARGB header (5V 3-pin). The LED Control Button on the I/O panel can be used to cycle through ARGB effects if connected to the case's ARGB controller.

Image 4.2: The pre-installed fan configuration, featuring three 120mm ARGB fans at the front and one 120mm ARGB fan at the rear for balanced airflow.

Image 4.3: Fan mounting options, showing support for up to eight 120mm fans or various radiator configurations for enhanced cooling.

4.8 케이블 관리

메인보드 트레이 뒤쪽의 케이블 정리용 홈과 고정 지점을 활용하여 케이블을 깔끔하게 정리하세요. 이렇게 하면 공기 흐름이 개선되고 미관도 향상됩니다.

4.9 사건 종결

Once all components are installed and cables are managed, reattach both side panels and secure them with the thumb screws.

5. 사용 설명서

5.1 전원 켜기

Press the Power button on the front I/O panel to turn on your system. Ensure all external peripherals (monitor, keyboard, mouse) are connected.

5.2 ARGB 조명 제어

The pre-installed ARGB fans can be controlled via the dedicated LED Control Button on the front I/O panel. Press this button to cycle through various lighting modes and colors. Alternatively, if the ARGB controller is connected to a compatible motherboard ARGB header, you can control the lighting using your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).

6. 유지관리

정기적인 유지 관리는 최적의 성능을 보장하고 PC 부품의 수명을 연장하는 데 도움이 됩니다.

• 먼지 필터 청소: Periodically remove and clean the dust filters (if present) to maintain optimal airflow and prevent dust buildup inside the case. Use compressed air or a soft brush.
• 일반 청소: 부드러운 d를 사용하세요amp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents. For the tempered glass panel, use a glass cleaner and a microfiber cloth.
• 내부 먼지 제거: Every few months, open the case and use compressed air to gently remove dust from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before performing internal cleaning.

7. 문제 해결

이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.

• 시스템 전원이 켜지지 않습니다:
  • PSU가 켜져 있고 벽면 콘센트에 제대로 연결되어 있는지 확인하세요.
  • 24핀 ATX 전원 케이블과 8핀 CPU 전원 케이블이 마더보드에 제대로 연결되어 있는지 확인하십시오.
  • Check that the front panel Power Switch cable is correctly connected to the motherboard header.
• 팬이 회전하지 않거나 ARGB 조명이 켜지지 않음:
  • Ensure fan power cables are connected to appropriate headers (motherboard or fan controller).
  • Verify ARGB cables are connected to a 5V 3-pin ARGB header on the motherboard or the case's ARGB controller.
  • If using the LED Control Button, ensure it is connected to the ARGB controller.
  • Check motherboard software for ARGB control settings.
• 과열 문제:
  • Ensure all case fans are spinning correctly and oriented for optimal airflow (intake at front, exhaust at rear/top).
  • Clean any dust filters and internal components to prevent airflow obstruction.
  • CPU 쿨러와 GPU 팬이 제대로 작동하는지 확인하십시오.

8. 사양

9. 보증 및 지원

Antec products come with a manufacturer's warranty. Please refer to the official Antec website or your regional distributor for specific warranty terms and conditions. For technical support, product inquiries, or warranty claims, please contact Antec customer service through their official channels.

공식 Antec Web대지: www.antec.com