PUSOKEI PUSOKEIr8kwoienpd

PUSOKEI LED Camping 랜턴 사용 설명서

Model: PUSOKEIr8kwoienpd

1. 서론

Thank you for choosing the PUSOKEI LED Camping Lantern. This manual provides essential information for the safe and efficient use of your new device. Please read these instructions carefully before operation and retain them for future reference.

2. 제품 오버view

The PUSOKEI LED Camping Lantern is a versatile, rechargeable, and solar-powered lighting solution designed for various outdoor and emergency situations. It features adjustable brightness and an SOS emergency mode.

PUSOKEI LED Camping Lantern, front view with solar panel and charging port cover

그림 2.1: 앞쪽 view of the PUSOKEI LED Camping Lantern, showing the integrated solar panel on top and the protected USB charging port on the side.

3. 패키지 내용

다음 품목이 패키지에 포함되어 있는지 확인하세요.

PUSOKEI LED Camping Lantern with included USB cable

그림 3.1: The PUSOKEI LED Camping Lantern shown with its accompanying USB charging cable.

4. 사양

특징사양
품목 모델 번호PUSOKEIr8kwoienpd
재료아크릴로니트릴 부타디엔 스티렌(ABS)
내장 배터리2400mAh 리튬 이온 배터리
광원백색광
색온도6500K
밝기 모드High - Low
특수 모드SOS 플래싱 모드
충전 방법USB Type-C, Solar
품목 무게7.8온스(약 222g)
제품 치수5.11 x 4.33 x 2.75 인치

5. 설정

Before first use, it is recommended to fully charge the lantern using the provided USB cable.

  1. Locate the USB charging port on the side of the lantern, typically protected by a rubber cover.
  2. 고무 커버를 엽니다.
  3. Connect the small end of the USB Type-C cable to the lantern's charging port.
  4. USB 케이블의 큰 쪽 끝을 표준 USB 전원 어댑터(별도 구매) 또는 컴퓨터 USB 포트에 연결하십시오.
  5. Allow the lantern to charge until the charging indicator (if present) shows a full charge.
  6. Once charged, disconnect the USB cable and securely close the rubber cover to protect the port from dust and moisture.
Close-up of the USB charging port and power button on the PUSOKEI LED Camp잉 랜턴

그림 5.1: Detail of the USB charging port (under the protective cover) and the power button.

6. 사용 설명서

The lantern is operated via a single button located near the charging port.

  1. 켜기/끄기: Press the button once to turn on the light. Subsequent single presses will cycle through brightness modes (e.g., High, Low, Off).
  2. 밝기 조정: With the light on, single-click the button to switch between available brightness levels (High and Low).
  3. Activating SOS Mode: When the light is on, press and hold the button for approximately 3 seconds to activate the SOS flashing mode.
  4. Exiting SOS Mode: Press the button once while in SOS mode to return to the previous steady light mode or turn off the lantern, depending on the sequence.

7. 충전

Your PUSOKEI LED Camping Lantern offers two convenient charging methods:

7.1. USB 충전

For optimal and faster charging, use the provided USB Type-C cable connected to a power source.

7.2. 태양광 충전

The integrated solar panel provides an alternative charging method, especially useful in outdoor emergency situations.

8. 유지관리

To ensure the longevity and optimal performance of your lantern:

9. 문제 해결

If you encounter issues with your PUSOKEI LED Camping Lantern, refer to the following common solutions:

문제가능한 원인해결책
랜턴이 켜지지 않습니다.배터리가 소진되었습니다.Charge the lantern using the USB cable or place it in direct sunlight.
빛이 어둡거나 깜빡입니다.배터리가 부족합니다.랜턴을 충전하세요.
Solar charging is slow or ineffective.햇빛 부족; 태양광 패널이 더럽습니다.Ensure the solar panel is in direct, unobstructed sunlight. Clean the solar panel surface. Use USB charging for faster results.
버튼이 작동하지 않습니다.Battery completely drained; internal malfunction.Attempt to charge the lantern via USB for at least 30 minutes. If the issue persists, contact customer support.

10. 안전 정보

다음 안전 예방 조치를 준수하십시오.

11. 보증 및 지원

For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact PUSOKEI customer service through the retailer where the product was acquired. Please have your model number (PUSOKEIr8kwoienpd) and purchase date available when contacting support.

Documents - PUSOKEI – PUSOKEIr8kwoienpd

관련 문서 없음