YeeSite 120W 24LED RGBW Stage Wash 라이트 바 사용 설명서

1. 서론

Thank you for choosing the YeeSite 120W 24LEDs RGBW Stage Wash Light Bar. This product is designed to provide versatile and dynamic lighting effects for various events and professional applications. It features a dual-zone lighting design with 24 powerful RGBW LEDs in the center and RGB strips on both sides, offering vibrant wall-washing and ambient effects.

1.1 안전 정보

• 감전 위험을 방지하기 위해 항상 기기를 접지 회로에 연결하십시오.
• 전원 볼륨을 확인tage는 지정된 vol과 일치합니다.tage 범위(110-240V).
• 케이스를 열지 마십시오. 내부에는 사용자가 수리할 수 있는 부품이 없습니다. 모든 수리는 자격을 갖춘 기술자에게 맡기십시오.
• 눈에 직접적인 빛 노출을 피하세요. 눈에 손상을 줄 수 있습니다.
• 과열을 방지하기 위해 장치 주변에 적절한 환기를 확보하세요.
• Keep the unit away from moisture, water, and flammable materials.

2. 패키지 내용

포장을 개봉하시면 아래 나열된 모든 품목이 포함되어 있고 양호한 상태인지 확인해 주십시오.

• 1 x 24LEDs RGBW Wash Light Bar
• 1 x 전원 케이블
• 1 x 사용자 매뉴얼(이 문서)
• 2 x 마운팅 브래킷

그림 2.1: 패키지에 포함된 품목.

3. 제품 오버view

The YeeSite 120W 24LEDs RGBW Stage Wash Light Bar features a robust aluminum construction and a unique dual-zone lighting design. It integrates 24 powerful RGBW LEDs for broad wash effects and additional RGB strips on both sides for layered ambient lighting.

그림 3.1: 전면 view of the YeeSite 120W 24LEDs RGBW Stage 워시 라이트 바.

그림 3.2: 예ample of colorful wash effects on a wall.

Figure 3.3: Dual-zone lighting with RGBW LEDs and RGB strips.

4. 사양

5. 설정

5.1 라이트 바 장착

The light bar includes adjustable brackets for flexible mounting options. It can be used for floor uplighting, wall lighting, or truss-mounted installations.

• Floor Uplighting: Attach the brackets to the sides of the light bar and position it on the floor, adjusting the angle as needed.
• 벽면 장착: Secure the brackets to a stable wall surface using appropriate hardware (not included), then attach the light bar.
• 트러스 장착: Attach the brackets to a lighting truss using suitable clamp(포함되지 않음). cl을 확인하십시오.amps가 단단히 고정되어 있습니다.

Figure 5.1: Mounting options for the light bar.

5.2 전원 연결

Connect the included power cable to the light bar and then to a standard power outlet. The unit supports wide voltage 입력(110-240V).

Daisy Chain Power: For larger setups, multiple light bars can be daisy-chained together to share a single power source. This reduces cable clutter and simplifies power distribution. You can connect up to 6 units at 110V or 10 units at 230V.

Figure 5.2: Daisy chain power connection diagram.

6. 작동 모드

The light bar offers multiple operating modes, which can be selected and configured using the control panel located on the rear of the unit.

6.1 제어판 이상view

The control panel features a digital display and four buttons: MENU, UP, DOWN, and ENTER. These buttons allow you to navigate through the settings and select different operating modes.

Figure 6.1: Rear control panel of the light bar.

6.2 자동 모드

In Auto Mode, the light bar cycles through 105 preloaded shows (56 for RGB strip, 49 for RGBW LED). This mode is ideal for quick setup and dynamic lighting without external control.

6.3 Sound Active Mode

The Sound Active Mode allows the light bar to react to music and ambient sounds. There are 4 distinct sound-active modes tailored for RGB Strip only, RGBW LED only, combined effects, or random beats. Sensitivity can be adjusted across 9 levels to match the audio environment.

6.4 마스터-슬레이브 모드

To synchronize multiple light bars, connect them in a Master-Slave configuration. One unit acts as the Master, controlling the others (Slaves). Connect the DMX OUT of the Master unit to the DMX IN of the first Slave unit, and then daisy-chain subsequent Slave units. Ensure all units are set to the correct Master or Slave mode via their control panels.

Figure 6.2: Master-Slave setup for synchronized lighting.

6.5 DMX 컨트롤 모드

For advanced and precise control, the light bar can be operated via DMX. It supports 8, 15, 40, or 92 DMX channels, allowing for detailed control over individual pixels and effects. Connect a DMX controller to the DMX IN port of the first light bar, and then daisy-chain to other units using the DMX OUT ports.

Figure 6.3: DMX control setup.

6.6 Video Demonstration of Operating Modes

7. 유지관리

Proper maintenance ensures the longevity and optimal performance of your light bar.

• 청소: Regularly clean the lens and housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
• 과열 보호: The fanless design ensures silent operation. If the internal temperature reaches 50–65°C, the light bar automatically reduces brightness to cool down, protecting the components. Allow sufficient space for heat dissipation.
• 저장: When not in use, store the light bar in a dry, dust-free environment.

8. 문제 해결

라이트바에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

• 전원 없음:
  • Check if the power cable is securely connected to both the light bar and the power outlet.
  • 전원 콘센트가 작동하는지 확인하세요.
• 빛 출력 없음:
  • Ensure the unit is powered on and not in a blackout mode.
  • If using DMX, check DMX connections and addressing.
• 잘못된 DMX 제어:
  • Verify the DMX address setting on the light bar matches your controller.
  • Check DMX cable connections for proper polarity and continuity.
  • Ensure the DMX controller is sending valid signals.
• Light Bar Overheating:
  • 장치 주변에 적절한 공기 흐름이 유지되도록 하세요.
  • 가능하면 주변 온도를 낮추십시오.

9. 보증 및 지원

The YeeSite 120W 24LEDs RGBW Stage Wash Light Bar comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, service, or warranty claims, please contact YeeSite customer service through the retailer where the product was purchased or visit the official YeeSite web연락처 정보 사이트.