HyperX FlipCast 스트리밍 XLR/USB 다이내믹 마이크 사용 설명서

소개

The HyperX FlipCast is a versatile dynamic microphone designed for high-quality audio capture across various platforms, including PC, MacOS, PlayStation, and Nintendo Switch. This manual provides detailed instructions for setting up, operating, and maintaining your microphone to ensure optimal performance.

Image: The HyperX FlipCast microphone, showcasing its sleek black design and integrated stand.

상자 안에 무엇이 들어있나요?

모든 구성품이 포장에 들어 있는지 확인하세요.

• HyperX FlipCast - Streaming XLR/USB Dynamic Microphone
• 3/8" Thread Adapter

설정

1. 마이크 장착

The HyperX FlipCast features universal 5/8" mounting threads and includes a 3/8" adapter for compatibility with various boom arms and stands. Securely attach the microphone to your preferred mounting solution.

Image: The HyperX FlipCast microphone mounted on a stand, highlighting the 5/8" mounting threads and the included 3/8" adapter.

2. 마이크 연결

The FlipCast offers dual connectivity options: USB-C for plug-and-play convenience and XLR for professional audio setups.

• USB-C 연결: Connect the provided USB-C cable from the microphone to an available USB port on your PC, MacOS device, PlayStation, or Nintendo Switch. The microphone will be automatically recognized.
• XLR 연결: For advanced setups, connect an XLR cable from the microphone to an audio mixer, audio interface, or studio deck. This allows for analog recording and integration into dual-PC streaming systems.

이미지: 클로즈업 view of the HyperX FlipCast's base, showing both the XLR and USB-C connectivity ports.

작동 지침

1. 온보드 컨트롤

The HyperX FlipCast features intuitive controls for quick adjustments during use:

• Multifunction Wheel: This wheel allows you to adjust microphone gain, headphone volume, and monitor mix. Rotate to change levels.
• LED 미터: Provides visual feedback on audio levels, helping you monitor your input.
• 탭하여 음소거 버튼: A simple tap will mute or unmute the microphone, indicated by the LED status.

Image: A close-up of the HyperX FlipCast's control panel, highlighting the multifunction wheel, tap-to-mute sensor, and LED meter.

2. Onboard Audio Filters

Enhance your audio quality with the built-in filters:

• 하이패스 필터: Use this switch to reduce low-frequency background noise, such as hums or rumbles.
• 존재감 강화: Activate this filter to add clarity and brightness to your vocals, helping them stand out.

이미지: 자세한 view of the HyperX FlipCast's rear, showing the switches for the high-pass filter and presence boost.

Software Customization with HyperX NGENUITY

For advanced customization and control, download and install the HyperX NGENUITY software. This software allows you to:

• Set auto-level mode for consistent audio.
• Customize EQ profiles to fine-tune your sound.
• Adjust colors of the LED ring for a personalized aesthetic.

Image: The HyperX FlipCast microphone in a desktop setup, with a computer screen displaying the HyperX NGENUITY software interface for customization.

유지

To ensure the longevity and optimal performance of your HyperX FlipCast microphone, follow these maintenance guidelines:

• 청소: 마이크 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오. 강한 화학 약품이나 연마성 재질은 사용하지 마십시오.
• 저장: 사용하지 않을 때는 극한의 온도와 습도를 피해 깨끗하고 건조한 곳에 마이크를 보관하세요.
• Integrated Wind Screen: The microphone features an integrated wind screen to reduce unwanted sounds. Keep this area free of dust and debris.

Image: A close-up of the HyperX FlipCast's microphone head, highlighting the integrated wind screen designed to reduce background noise.

문제 해결

If you encounter issues with your HyperX FlipCast microphone, refer to the following common solutions:

• 사운드 출력 없음:
  • Ensure the microphone is properly connected via USB-C or XLR.
  • Check that the microphone is not muted using the tap-to-mute button.
  • Verify input/output settings in your operating system or recording software.
  • Adjust the microphone gain using the multifunction wheel.
• 낮은 오디오 품질:
  • 마이크 정면을 향해 말씀해 주십시오.
  • Check for excessive background noise and consider using the high-pass filter.
  • Adjust microphone gain to prevent clipping or low volume.
  • Update HyperX NGENUITY software and firmware.
• 마이크가 인식되지 않음:
  • Try connecting to a different USB port or using a different USB-C cable.
  • 컴퓨터나 기기를 다시 시작하세요.
  • For XLR, ensure your audio interface or mixer is powered on and configured correctly.

명세서

보증 및 지원

HyperX products are backed by a limited warranty. For detailed warranty information, product support, and frequently asked questions, please visit the official HyperX support web대지:

www.hyperx.com/support

You may also contact HyperX customer service for assistance with any product-related inquiries.