1. 서론
This manual provides essential instructions for the safe installation, operation, and maintenance of your Ranein 2.5-Gallon Mini Tank Electric Water Heater. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and adherence to these guidelines will ensure optimal performance and longevity of your water heater.
Image: The Ranein 2.5-Gallon Mini Tank Electric Water Heater, a compact unit designed for point-of-use hot water.
2. 안전 정보
Your safety and the safety of others are paramount. This water heater is equipped with multiple safety features. Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury.
- 전문 설치 권장: Installation should be performed by a qualified plumber or electrician in accordance with all local codes and regulations.
- 전기 안전: Ensure the unit is properly grounded. Do not operate if the power cord is damaged.
- 수압: Do not exceed the maximum rated water pressure of 150 PSI. A pressure relief valve is included and must be installed.
- 온도 설정 : Be aware that water temperatures above 125°F (52°C) can cause severe burns or scalding. Adjust the thermostat carefully.
- 건조 연소 방지: The unit includes dry-burn protection, which automatically shuts off heating if the tank is empty.
- IPX4 방수 등급: 물 튀김으로부터 보호해 줍니다.
- 누출 감지: The system is designed with rapid leak detection for enhanced safety.
Image: Diagram illustrating the multiple protection features of the Ranein water heater, including high temperature, corrosion, high pressure, dry burning, IPX4 waterproof, and leakage resistance.
3. 제품 특징
The Ranein 2.5-Gallon Mini Tank Electric Water Heater is designed for efficient and convenient hot water supply at the point of use. Key features include:
- 순간 온수: 1440W, 120V mini tank heater provides immediate hot water, eliminating waiting times for kitchen sinks, utility basins, bathrooms, RVs, and cabins.
- 조정 가능한 온도: Customize water temperature from 68°F to 149°F (20°C to 65°C).
- 내구성 있는 구조: Features a premium 304 stainless steel inner tank for corrosion resistance, scale buildup prevention, and high-pressure wear, outlasting standard enamel glass-lined tanks. Includes a reinforced welded structure and magnesium anode rod.
- Triple-Layer Heat Retention: Advanced insulation system with enamel coating, high-density foam, and reinforced steel housing reduces standby heat loss by up to 30%, ensuring 99% heating efficiency.
- 6-Level Safety Protection: Incorporates an adjustable thermostat, over-temperature safeguard (up to 185°F/85°C), high-pressure resistance (up to 150 PSI), dry-burn protection, IPX4 waterproof rating, and rapid leak detection.
- 다양한 설치: Compact design allows for wall, floor, or under-sink mounting with standard 1/2" NPT connections. Plugs into a standard 120V outlet.
Image: Visual representation of key features including 1440W fast heating, intelligent constant temperature, easy installation, and 6 safety protections.
Image: Diagram highlighting the 3D foam insulation layer for high material density, one-piece foaming technology, sealed and leak-proof design, high temperature resistance, and long-lasting heat preservation.
4. 제품 사양
| 사양 | 값 |
|---|---|
| 상표 | 라네인 |
| 모델 번호 | RC25G-W |
| 용량 | 2.5갤런 |
| 왓tage | 1440 와트 |
| 권tage | 120V |
| 제품 치수(폭 x 높이) | 13.39인치 x 13.39인치 |
| 항목 깊이 | 11.42인치 |
| 품목 무게 | 17.63파운드 |
| 최대 수압 | 150파운드 |
| 방수등급 | IPX4 |
| 장착 유형 | Floor, Under Sink, Wall |
| 색상 | 하얀색 |
Image: Detailed product parameters including capacity, voltage, power, max water pressure, weight, amperage, and waterproof grade.
5. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Ranein 2.5-Gallon Mini Tank Electric Water Heater Unit
- Pressure Relief Valve (T/P Valve)
- 물 호스 (2)
- 장착 브래킷
- 장착 나사 및 앵커
- 배수 호스
- 테프론 테이프
6. 설치
This section outlines the steps for installing your Ranein Mini Tank Electric Water Heater. For safety and proper function, it is highly recommended that installation be performed by a qualified professional.
6.1 일반 설치 지침
- Choose a location that is protected from freezing temperatures and is close to the point of use to minimize heat loss.
- Ensure adequate clearance around the unit for maintenance and air circulation. Refer to the 'Please Confirm Your Under-sink Space' image for minimum clearances if installing under a sink.
- The unit can be mounted on a wall, placed on the floor, or on a shelf.
Image: Diagram showing minimum space requirements for under-sink installation, with 5 inches above and 2 inches on either side of the unit.
6.2 물 연결
- 주요 물 공급을 차단하세요.
- Apply Teflon tape to the threads of the pressure relief valve (T/P valve) and install it into the hot water outlet (red marked port) on top of the water heater. Tighten with a wrench.
- Connect the flexible water hoses to the hot water outlet (from T/P valve) and cold water inlet (blue marked port) on the water heater. Ensure connections are tight to prevent leaks.
- Connect the other ends of the flexible hoses to your hot and cold water lines. The hot water line from the heater connects to the hot water faucet, and the cold water line from the main supply connects to the cold water inlet of the heater.
- Attach the drain hose to the T/P valve's discharge port. Route the drain hose to an open drain or suitable discharge area.
- Slowly turn on the main water supply and check for leaks. Open a hot water faucet to allow air to escape from the tank until water flows steadily.
Video: A detailed installation guide for the Ranein Mini Tank Water Heater, demonstrating water connections and mounting.
6.3 전기 연결
- Ensure the water heater is filled with water before connecting to power.
- Plug the water heater's power cord into a standard 120V grounded electrical outlet.
- 연장코드나 어댑터를 사용하지 마세요.
6.4 장착 옵션
The Ranein water heater offers flexible installation options:
- Under-sink: Place the unit directly on the floor or a sturdy shelf beneath the sink.
- 벽걸이형: Use the provided mounting bracket, screws, and anchors to securely attach the unit to a wall. Ensure the wall material can support the weight of the full water heater.
이미지: 전amples of under-sink and wall-mounted installations for the Ranein water heater.
7. 운영
7.1 초기 시작
- After completing water and electrical connections, ensure the tank is full by opening a hot water faucet until water flows without sputtering.
- Turn the temperature knob to your desired setting. The unit will begin heating the water.
7.2 온도 조절
The temperature knob on the front of the unit allows you to set the desired water temperature between 68°F and 149°F (20°C and 65°C). Rotate the knob clockwise to increase the temperature and counter-clockwise to decrease it. The 'Heating' indicator light will illuminate when the unit is actively heating water.
Image: Close-up of the temperature adjustment knob, showing settings from 55°F to 145°F and suggested temperatures for various uses like washing dishes, vegetables, brushing teeth, and washing face.
비디오: 간략하게 살펴보기view of the Ranein Mini Tank Water Heater, showcasing its compact design, high power heating, and ease of use in a kitchen setting.
8. 유지관리
Regular maintenance helps ensure the efficiency and longevity of your water heater.
- 배수 및 세척: Periodically drain and flush the tank to remove sediment buildup. This is especially important in areas with hard water. Refer to the installation section for draining procedures.
- Inspect T/P Valve: Annually check the pressure relief valve for proper operation. Lift and release the lever on the valve to ensure it opens and closes freely.
- 양극봉 검사: The magnesium anode rod helps protect the tank from corrosion. It should be inspected and replaced as needed, typically every 1-3 years depending on water quality. This procedure may require professional assistance.
- 외부 청소: 부드러운 천으로 장치 외부를 청소하십시오. damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
9. 문제 해결
If you encounter issues with your water heater, refer to the following common troubleshooting steps. For complex problems, contact customer support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 뜨거운 물이 없습니다 | No power, thermostat set too low, dry-burn protection activated | Check power connection and outlet. Adjust thermostat. Ensure tank is full of water. |
| 물이 충분히 뜨겁지 않음 | Thermostat set too low, excessive hot water demand, sediment buildup | Increase thermostat setting. Allow time for recovery. Drain and flush tank. |
| 물이 새다 | Loose connections, T/P valve discharge, tank damage | Tighten water connections. Check T/P valve for proper function. If tank damage is suspected, turn off water and power immediately and contact support. |
| 시끄러운 작동 | Sediment buildup, air in system | Drain and flush tank. Open hot water faucet to release air. |
10. 보증 및 지원
Ranein은 신뢰할 수 있는 제품과 탁월한 고객 서비스를 제공하기 위해 최선을 다하고 있습니다.
- 보증: This product is backed by a 2-year tank warranty against manufacturing defects.
- 고객 지원: For installation guidance, product consultation, or problem-solving services, please contact Ranein customer support.
- 연락처 정보:
이메일: service@ranein.net
전화(미국): (424) 452-2630