라네인 RH8K-LPG

Ranein GEN II Propane Gas Tankless Water Heater

Model: RH8K-LPG (3.6 GPM, 80,000 BTU, Indoor Propane)

1. 서론

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Ranein GEN II Propane Gas Tankless Water Heater, Model RH8K-LPG. This indoor unit is designed to provide on-demand hot water with a maximum flow rate of 3.6 Gallons Per Minute (GPM) and an 80,000 BTU heating capacity.

주요 특징은 다음과 같습니다.

  • 연속 온수: Delivers up to 3.6 GPM, suitable for 2-3 simultaneous hot water outlets (e.g., shower, kitchen sink, bar).
  • 안정적인 온도 조절: Advanced technology ensures consistent water temperature without sudden fluctuations.
  • 에너지 효율성: 필요할 때만 물을 데우므로 기존 탱크형 온수기에 비해 대기 에너지 낭비를 줄입니다.
  • 컴팩트한 디자인: Wall-mounted unit saves valuable floor space, ideal for smaller homes or renovations.
  • 사전 설정 모드 : Features four specialized one-click modes for specific needs: Dish (100°F), Fruit (95°F), Infant (104°F), and Elderly (107°F).
  • Included Vent Pipe: 배기 파이프가 포함되어 있어 별도로 구매할 필요가 없습니다.
  • 내구성 있는 구조: Utilizes an oxygen-free copper tank for reduced heat loss and enhanced energy efficiency.

2. 중요한 안전 정보

경고: 부적절한 설치, 조정, 변경, 서비스 또는 유지보수는 재산 피해, 부상 또는 사망을 초래할 수 있습니다. 이 장비를 설치하거나 서비스하기 전에 설치, 작동 및 유지보수 지침을 철저히 읽으십시오.

전문적인 설치: This appliance MUST be installed by licensed professionals in accordance with all local building and plumbing codes. Installation is NOT recommended for areas above 2,000 feet elevation.

안전 기능: The Ranein GEN II water heater incorporates an 8-layer all-around protection system for user safety, including:

  • Flame Out Protection
  • 과열 보호
  • Dry Burning Protection
  • 과열 보호
  • 시간 초과 보호
  • Pipe Blockage Protection
  • High Temperature Lock Protection
  • Excessive Air Pressure Protection

3. 패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

  • Ranein Tankless Water Heater (Model RH8K-LPG) x1
  • Vent Pipe x1
  • 조립 키트 x1
  • 사용 설명서 x1

4. 사양

Ranein Tankless Water Heater with dimensions and specifications

Image: Ranein Tankless Water Heater with key specifications and dimensions.

사양
상표라네인
모델 번호RH8K-LPG
제품 치수폭 19.08인치 x 높이 7.66인치
특징LED 디스플레이
색상회색
권tage120볼트(AC)
최대 온도104 Degrees Fahrenheit (Preset Infant Mode)
스타일프로판
장착 유형
품목 무게23.1파운드
유량최대 3.6 GPM
BTU 등급80,000비티유
Gas Water Heater Selection Guide showing GPM and BTU options

Image: Gas Water Heater Selection Guide, illustrating different GPM and BTU options for various outlet points. The 3.6 GPM, 80,000 BTU model is highlighted for 2-3 outlet points.

5. 설치

Installation of the Ranein tankless water heater requires adherence to all local building, plumbing, and gas codes. It is mandatory that installation be performed by a licensed professional.

일반 설치 단계:

  1. 위치 선택: Choose an indoor location that is protected from freezing temperatures and has adequate ventilation. Ensure the location allows for proper venting of exhaust gases.
  2. 설치: Use the provided template to mark and drill mounting holes. Securely mount the water heater to a sturdy wall surface.
  3. 환기관 연결: Connect the included vent pipe to the top exhaust port of the unit. Ensure all connections are sealed properly to prevent gas leaks.
  4. 물 연결: Connect the cold water inlet (blue) and hot water outlet (red) to your home's plumbing system using standard 1/2" NPT fittings.
  5. 가스 연결: Connect the propane gas supply to the gas inlet (yellow) using appropriate gas lines and fittings. Ensure all gas connections are leak-tested.
  6. 전기 연결: Plug the unit into a standard 120V AC electrical outlet. No special wiring is typically required.
  7. 시스템 플러시: Before initial use, flush the system to remove any debris.

비디오: 오버view of the Ranein Gas Tankless Water Heater (80,000 BTU) highlighting its features and ease of installation. This video demonstrates the product's design and basic setup components.

6. 사용 설명서

The Ranein tankless water heater features an intuitive LED display and touch control panel for easy operation.

Close-up of the Ranein Tankless Water Heater LED display and touch control panel

이미지: 클로즈업 view of the LED display and touch control panel, showing temperature settings and mode icons.

기본 작업:

  1. 전원 켜기/끄기: Press the power button on the LED display to turn the unit on or off.
  2. 온도 조절: Use the up and down arrows on the control panel to set your desired water temperature. The LED display will show the current temperature setting.
  3. 물의 흐름: The unit will automatically activate and begin heating water when a hot water tap is opened.

스마트 모드:

Utilize the one-click specialized modes for optimized temperature settings:

Smart Mode settings for Ranein Tankless Water Heater: Dish, Fruit, Infant, Elderly

Image: Visual representation of the four Smart Modes: Dish (100°F), Fruit (95°F), Infant (104°F), and Elderly (107°F).

  • Dish Mode (100°F): Ideal for washing dishes.
  • Fruit Mode (95°F): Suitable for washing fruits and vegetables.
  • Infant Mode (104°F): Provides a safe and comfortable temperature for infant bathing.
  • Elderly Mode (107°F): Offers a warm and gentle temperature for elderly users.

7. 유지관리

Regular maintenance ensures the longevity and efficient performance of your tankless water heater.

  • 연간 세척: It is recommended to flush the water heater annually to remove mineral buildup. This helps maintain efficiency and prevent damage. Consider installing maintenance valves to simplify this process.
  • 필터 청소: Periodically check and clean the inlet water filter to ensure optimal water flow.
  • 환기 파이프 점검: Regularly inspect the vent pipe for any obstructions or damage.
  • 외부 청소: 부드러운 천으로 장치 외부를 청소하십시오. damp 천. 연마성 세척제는 사용하지 마십시오.

8. 문제 해결

This section provides solutions to common issues. For complex problems, contact a licensed professional or Ranein customer support.

문제가능한 원인해결책
No hot water or inconsistent temperatureLow water pressure, clogged filter, gas supply issue, error code displayed.Check water pressure. Clean the inlet water filter. Verify gas supply. Refer to the manual for specific error code meanings.
Unit displays an error code (e.g., Error 8)특정 시스템 오류.Consult the detailed troubleshooting section in the full user manual for the specific error code. Power cycling the unit (turning off and on) may resolve temporary issues.
Water not getting hot enoughIncorrect temperature setting, high flow rate exceeding unit capacity, mineral buildup.Adjust temperature setting. Reduce water flow if necessary. Perform annual flushing to remove mineral buildup.

9. 보증 및 지원

Ranein provides a 2년 무상 서비스 보증 for this product, covering manufacturing defects and ensuring reliable operation. This warranty is in addition to the 8 types of security protection built into the unit.

For any questions, technical assistance, or warranty claims, please contact Ranein customer support. Refer to the contact information provided in your included user manual or visit the official Ranein web대지.

Ranein customer support team with text 'We're Here For You 24/7'

Image: Ranein customer support team, emphasizing 24/7 availability for assistance.