1. 서론
Thank you for choosing the EMOS TSS910A Photoelectric Smoke Detector. This manual provides essential information for the safe and effective installation, operation, and maintenance of your smoke detector. Please read these instructions carefully before use and retain them for future reference.
The EMOS TSS910A is designed to provide early warning of fire by detecting smoke particles. It features a photoelectric sensor, an 85 dB acoustic alarm, and an optical LED warning light, ensuring reliable detection and alerting. With its 10-year lifespan and included 9V battery, it offers long-term safety for your home or office.
2. 안전 정보
- 이 연기 감지기는 실내용으로만 제작되었습니다.
- 연기 감지기에 페인트를 칠하지 마십시오. 페인트는 감지 챔버를 막아 경보기가 제대로 작동하지 못하게 할 수 있습니다.
- 습도가 높거나, 온도가 극한이거나, 먼지가 심한 곳에는 설치하지 마세요.
- Regularly test the smoke detector as described in the operating instructions.
- 화재경보기를 절대 무시하지 마십시오. 원인을 조사하고 즉시 적절한 조치를 취하십시오.
- Keep out of reach of children unless installed securely.
- 배터리와 기기를 지역 규정에 따라 폐기하세요.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 1 x EMOS TSS910A Smoke Detector
- 1 x 9V Battery (Alkaline)
- 장착 나사 및 벽면 플러그
- 사용 설명서 (본 문서)
4. 제품 오버view
Familiarize yourself with the components of your EMOS TSS910A smoke detector:
This image displays the EMOS TSS910A smoke detector from the front and side, highlighting key features. The front view shows the acoustic alarm vents, the optical alarm LED, and the central test button. An inset image shows the battery compartment. Dimensions are also provided: 101 mm diameter and 36 mm height.
- 테스트 버튼: Press to test the alarm function.
- Optical LED: Flashes periodically during normal operation and rapidly during an alarm.
- 음향 경보: Emits an 85 dB sound during an alarm.
- 배터리 칸: Located on the rear for the 9V battery.
- 장착 판 : Detachable plate for ceiling or wall installation.
5. 설정 및 설치
5.1 위치 선택
For optimal protection, install smoke detectors in every sleeping area and on every level of your home, including the basement. Consider these guidelines:
- Install on the ceiling in the center of a room or hallway.
- If wall-mounted, the top of the alarm should be 10-30 cm (4-12 inches) below the ceiling.
- Keep away from corners (at least 50 cm / 20 inches from walls).
- Avoid installing near windows, doors, or air vents where drafts could interfere with smoke detection.
- Do not install in kitchens, bathrooms, or garages where cooking fumes, steam, or exhaust fumes could cause false alarms.
This image shows the EMOS TSS910A smoke detector mounted on a ceiling, demonstrating a typical installation scenario in a residential setting. The detector is centrally placed on the ceiling, blending with the room's decor.
5.2 배터리 설치
- Twist the smoke detector counter-clockwise to detach it from the mounting plate.
- 탐지기 뒷면에서 배터리 칸을 찾으세요.
- Connect the included 9V alkaline battery to the battery clip, ensuring correct polarity (+ to + and - to -).
- 배터리를 구획에 넣습니다.
- Reattach the smoke detector to the mounting plate by aligning the marks and twisting clockwise until it clicks into place.
This image illustrates the open battery compartment of the EMOS TSS910A smoke detector, clearly showing the terminals for the 9V battery. This visual aid helps users correctly install the battery.
5.3 검출기 장착
- Once the battery is installed, hold the mounting plate against the chosen ceiling or wall location.
- 나사 구멍 두 개의 위치를 표시하세요.
- 표시된 위치에 구멍 두 개를 뚫으세요. 필요한 경우 벽 플러그를 삽입하세요.
- 제공된 나사를 사용하여 장착판을 고정하십시오.
- Attach the smoke detector to the secured mounting plate by aligning the marks and twisting clockwise until it locks firmly.
- After mounting, press the test button to ensure the alarm functions correctly.
6. 사용 설명서
6.1 정상 작동
Once installed with a fresh battery, the smoke detector is active. The optical LED will flash approximately once every 40-60 seconds to indicate normal operation.
6.2 알람 테스트
It is crucial to test your smoke detector weekly to ensure it is functioning correctly. To test:
- Press and hold the large central 테스트 버튼 on the front of the detector for a few seconds.
- The alarm will sound loudly (85 dB), and the LED will flash rapidly.
- 버튼을 놓으세요. 경보가 멈출 것입니다.
- 알람이 울리지 않으면 문제 해결 섹션을 참조하세요.
6.3 알람 표시
- 화재 경보기: When smoke is detected, the alarm will sound continuously (85 dB), and the red LED will flash rapidly.
- 배터리 부족 경고: The detector will chirp approximately once every 30-40 seconds, and the LED will flash simultaneously, indicating that the battery needs to be replaced. This warning will continue for about 30 days.
7. 유지관리
7.1 배터리 교체
When the low battery warning sounds (a chirp every 30-40 seconds), replace the 9V battery immediately. Use only alkaline 9V batteries. To replace:
- 연기 감지기를 시계 반대 방향으로 돌려 장착판에서 분리하십시오.
- Disconnect the old 9V battery from the clip and remove it.
- 새로운 9V 알칼리 배터리를 연결할 때 극성을 올바르게 연결했는지 확인하십시오.
- Place the new battery into the compartment.
- Reattach the smoke detector to the mounting plate by aligning the marks and twisting clockwise until it clicks into place.
- Test the alarm using the test button after battery replacement.
7.2 연기 감지기 청소하기
Dust and debris can accumulate on the smoke detector and affect its performance. Clean your detector at least once a month:
- Gently vacuum the exterior of the smoke detector using a soft brush attachment.
- Wipe the cover with a slightly damp 옷감. 세척제나 용제를 사용하지 마십시오.
- Never paint the smoke detector.
7.3 수명
The EMOS TSS910A smoke detector has a 10-year operational lifespan. After 10 years from the manufacturing date (usually printed on the device), the entire unit should be replaced, even if it appears to be working correctly.
This image emphasizes the 10-year safety feature of the EMOS TSS910A smoke detector, shown installed on a ceiling. The long lifespan of the sensor and the low battery warning ensure continuous operation and safety.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 테스트 중에는 알람이 울리지 않습니다. | 배터리가 방전되었거나 잘못 설치되었습니다. | Check battery polarity. Replace with a new 9V alkaline battery. |
| Detector chirps every 30-40 seconds. | 배터리 부족 경고. | 9V 배터리를 즉시 교체하세요. |
| 거짓 경보가 자주 발생합니다. | Improper location (e.g., near kitchen, bathroom, or dusty area). Dust accumulation. | 감지기를 더 적합한 장소로 옮기세요. 유지 관리 지침에 따라 감지기를 청소하세요. |
| LED does not flash during normal operation. | 배터리가 방전되었거나 장치가 고장났습니다. | Replace battery. If problem persists, the unit may need replacement. |
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | TSS910A |
| 센서 유형 | 광전 |
| 알람 볼륨 | 85데시벨 |
| 전원 | 9V 알칼리 배터리 1개 (포함) |
| 운영 볼륨tage | 9V |
| 수명 | 10년 |
| 치수(D x H) | 10.1 x 3.6cm(4 x 1.4인치) |
| 무게 | 190g(0.42파운드) |
| 재료 | 플라스틱 |
| 색상 | 하얀색 |
| 작동 습도 | 5% ~ 95% RH (비응축) |
10. 보증 및 지원
EMOS products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official EMOS web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
