1. 서론
This manual provides essential instructions for the proper use, setup, and maintenance of your VIVURN 028 Leg Exerciser Replacement RF Remote Control. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.
2. 호환성
This replacement remote control is specifically designed for the VIVURN 028 White under desk elliptical. It is compatible with units ordered after October 1, 2025. This remote is ~ 아니다 compatible with the VIVURN 018 mini elliptical or other brands of leg exercisers.
To confirm compatibility, press any button on the remote. The light in front of the remote should turn blue. Ensure your original remote exhibited this behavior.
Image: The VIVURN 028 replacement remote shown next to several elliptical models, highlighting its specific compatibility with the white VIVURN 028 model.
3. 패키지 내용
- One (1) VIVURN 028 Replacement RF Remote Control
4. 설정
4.1 배터리 설치
- 리모콘 뒷면에서 배터리함을 찾으세요.
- 배터리 덮개를 아래로 밀어서 엽니다.
- Insert two (2) AAA batteries (not included) into the compartment, ensuring correct polarity (+/-) as indicated inside the compartment.
- 딸깍 소리가 날 때까지 배터리 덮개를 다시 제자리에 밀어 넣습니다.
이미지: 후면 view of the remote control with the battery cover open, illustrating the correct placement of two AAA batteries.
메모: This remote utilizes Radio Frequency (RF) technology, offering more responsive control without needing to point directly at the elliptical.
5. 사용 설명서
Familiarize yourself with the buttons on your VIVURN 028 replacement remote control:
Image: A clear diagram of the remote control, indicating the function of each button.
- 전원(빨간색 버튼): Press to turn the elliptical exerciser On or Off.
- 시작 멈춤: Press to start or stop the exercise program. Can also be used to reset certain functions.
- 오시는 길 : Cycles through different program modes (P1, P2, P3) or the Heart Rate (HR) mode.
- 방향: In HR mode, press to switch the pedaling direction (forward or reverse).
- 기능: Press to switch the data displayed on the elliptical's screen (e.g., time, distance, calories).
- SPEED ▲ (Up Arrow): In HR mode, press to increase the speed or resistance level.
- SPEED ▼ (Down Arrow): In HR mode, press to decrease the speed or resistance level.
6. 유지관리
6.1 배터리 교체
When the remote control's responsiveness decreases or the blue indicator light no longer illuminates, it is time to replace the batteries. Follow the battery installation steps in Section 4.1.
- Always use two new AAA batteries.
- 오래된 건전지와 새 건전지, 다른 종류의 건전지를 혼용하지 마세요.
- 장기간 리모컨을 사용하지 않을 경우 배터리 누출을 방지하기 위해 배터리를 제거하세요.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Remote not responding to elliptical. | 배터리가 방전되었거나 잘못 설치되었습니다. | 올바른 극성을 확인하여 새 AAA 배터리로 교체하세요. |
| Remote light does not turn blue when buttons are pressed. | Low battery power or remote malfunction. | Replace batteries. If issue persists, contact VIVURN customer support. |
| 원격근무는 간헐적으로 진행됩니다. | 배터리 성능이 약하거나 간섭이 발생할 수 있습니다. | 배터리를 교체하십시오. 주변에 강력한 전자 기기가 있어 간섭을 일으키지 않는지 확인하십시오. |
| Remote does not control other elliptical models. | 호환되지 않는 모델입니다. | This remote is only compatible with the VIVURN 028 White under desk elliptical (ordered after Oct 1, 2025). |
8. 사양
- 모델 이름: 028-remote
- 상표: 비번
- 품목 무게: 1.28 온스
- 패키지 크기: 6.3 x 5.7 x 0.75 인치
- 전원: AAA 배터리 2개(포함되지 않음)
- 연결성: 무선 주파수 (RF)
9. 보증 및 지원
For warranty information or technical support, please refer to the documentation provided with your VIVURN 028 Leg Exerciser or visit the official VIVURN web대지. 보증 청구를 위해 구매 영수증을 보관하십시오.
