샤오미 휴대용 전기 에어 컴프레서 2 프로 사용 설명서

소개

This manual provides detailed instructions for the safe and efficient operation of your Xiaomi Portable Electric Air Compressor 2 Pro. Please read this manual thoroughly before using the product and retain it for future reference. This device is designed for inflating tires on cars, motorcycles, bicycles, and balls, offering a convenient and portable solution for maintaining optimal pressure.

안전 정보

경고: 이러한 안전 지침을 따르지 않을 경우 감전, 화재 또는 심각한 부상을 입을 수 있습니다.

• 기기를 어린이의 손이 닿지 않는 곳에 보관하세요.
• 습기가 많은 환경이나 인화성 액체 또는 가스 근처에서 압축기를 작동하지 마십시오.
• Ensure the air hose is securely connected to the valve before starting inflation.
• Do not over-inflate items. Always refer to the recommended pressure for the item being inflated. The auto shut-off feature helps prevent over-inflation.
• 과열을 방지하기 위해 장시간 연속 작동을 피하십시오. 기기가 뜨거워지면 식히십시오.
• Use only the provided charging cable and a compatible 5V/3A power adapter for charging.
• 기기를 분해하거나 개조하지 마십시오. 수리가 필요한 경우 고객 지원 센터에 문의하십시오.

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 샤오미 휴대용 전기 에어 컴프레서 2 프로
• Fast-connecting air valve
• High-pressure air hose extension
• Needle valve (for balls)
• Presta valve adapter (for some bicycle tires)
• Type-C 충전 케이블
• 보관 파우치

Figure 1: Included accessories with the air compressor.

제품 끝view

The Xiaomi Portable Electric Air Compressor 2 Pro is a compact and powerful inflation device. It features a digital LED display, multiple preset modes, and a long-lasting rechargeable battery for convenient use.

Figure 2: Xiaomi Portable Electric Air Compressor 2 Pro.

주요 특징:

• 최대 압력: Up to 150 PSI for various inflation needs.
• 디지털 LED 디스플레이: 실시간 압력 측정값을 제공하고 정밀한 압력 설정을 가능하게 합니다.
• 자동 차단 : 설정된 압력에 도달하면 자동으로 공기 주입이 중단되어 과팽창을 방지합니다.
• 무선 및 충전식: Powered by a 27 Watt-hour battery, offering portability and convenience.
• 다양한 사전 설정 모드: Includes modes for car, motorcycle, bicycle, electric scooter, and ball, along with a custom mode.
• Dual-Purpose LED Light: Features a white light for illumination and a red light for signaling.
• 소형 및 경량: 보관과 운반이 용이하도록 설계되었습니다.

Figure 3: Product details showing 150 PSI capability, battery indicator, and hose lock.

설정

1. 초기 충전

Before first use, fully charge the air compressor. Connect the provided Type-C charging cable to the charging port on the device and the other end to a 5V/3A USB power adapter (not included). The battery indicator on the display will show charging progress. A full charge typically takes approximately 3.5 hours.

2. 에어 호스 부착

The air hose is stored by being locked into the device. To use, pull the air hose out of its storage slot. This action will automatically power on the device. Connect the appropriate valve adapter (Schrader, Presta, or needle valve) to the end of the air hose, depending on the item you intend to inflate.

Figure 4: Pulling the air hose from its slot to power on the device.

작동 지침

1. 전원 켜기 / 끄기

• 전원 켜기: Pull the air hose out of its storage slot. The device will automatically power on and display the current pressure.
• 전원 끄기 : Push the air hose back into its storage slot. The device will automatically power off.

2. 디스플레이 이해하기

The large LED display shows the current pressure, selected mode, and battery level. You can switch between PSI and Bar units using the unit selection button.

Figure 5: Digital display showing mode icons and pressure.

3. Selecting Inflation Modes

Press the mode button to cycle through the 6 preset inflation modes:

• 커스텀 모드 : Default 35 PSI (adjustable 3-150 PSI / 0.2-10.3 Bar)
• 자전거 모드: 기본값 45 PSI (30-65 PSI 조절 가능)
• 오토바이 모드: Default 2.4 Bar (adjustable 1.8-3.0 Bar)
• 자동차 모드: Default 2.5 Bar (adjustable 1.8-3.5 Bar)
• 전동 스쿠터 모드: 기본값 50 PSI (45-60 PSI 조절 가능)
• 볼 모드: 기본값 8 PSI (4-16 PSI 조절 가능)

그림 6: 이상view of multiple preset inflation modes.

4. Adjusting Pressure Settings

After selecting a mode, use the '+' and '-' buttons to adjust the target pressure. The display will show the target pressure blinking. Once set, the value will stabilize.

5. 인플레이션 과정

1. Connect the air hose with the appropriate adapter securely to the valve stem of the item to be inflated.
2. The display will show the current pressure of the item.
3. Select the desired inflation mode and set the target pressure.
4. Press the start button (usually the center button) to begin inflation.
5. The compressor will automatically stop once the target pressure is reached.
6. 밸브 스템에서 에어 호스를 분리하십시오.

Figure 7: Auto pressure detection and inflation for a bicycle tire.

6. LED 조명 사용

Press the light button to activate the LED light. It has two modes: a white light for illumination in dark environments and a red flashing light for emergency signaling.

Figure 8: Dual-purpose lighting system in use (white for task, red for signaling).

충전 중

The device is equipped with a 27 Watt-hour rechargeable battery. When the battery level is low, the battery indicator on the display will show a low charge. Connect the Type-C charging cable to recharge. The device can reinflate approximately 16 car tires (from 2.0 Bar to 2.5 Bar) on a full charge, or inflate up to 138 size 7 basketballs (from 0 PSI to 8 PSI).

Figure 9: Battery capacity and inflation performance examp레.

유지

• 청소: 압축기 외부를 부드러운 천으로 닦으세요.amp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
• 저장: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the air hose is properly stowed to prevent damage.
• 배터리 관리 : 최적의 배터리 수명을 위해 정기적으로 사용하지 않더라도 3개월에 한 번씩 기기를 충전하세요.

문제 해결

명세서

공식 제품 영상

보증 및 지원

For warranty information or technical support, please refer to the warranty card included with your product or contact the manufacturer directly through their official website. Ensure you have your product model number (XM-MJCQB06QW-03) and purchase details available when seeking support.