AVATTO Smart Fingerprint Door Lock Cylinder 60mm (30/30) User Manual

1. 서론

This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your AVATTO Smart Fingerprint Door Lock Cylinder (Model SDL-S1-B60). Please read this manual carefully before installation and use to ensure proper function and safety. Keep this manual for future reference.

2. 안전 정보

• 설치하기 전에 모든 구성품이 있는지, 손상되지 않았는지 확인하십시오.
• Do not attempt to disassemble or modify the lock cylinder, as this may void the warranty and compromise security.
• Use only the specified 1.5V alkaline batteries. Do not mix old and new batteries or different types of batteries.
• 기계식 열쇠는 건물 외부의 안전한 장소에 보관하십시오.
• Protect the fingerprint sensor from sharp objects or excessive force.
• This lock is designed for indoor use. Avoid exposure to extreme weather conditions.

3. 패키지 내용

다음 품목이 모두 패키지에 포함되어 있는지 확인하세요.

• 1 x AVATTO Smart Door Lock Cylinder (60mm)
• 2 x 기계식 키
• 3 x RFID 카드
• 1 x 드라이버
• 1 x User Manual (German, refer to this document for English instructions)

4. 설치

4.1 설치 전 확인 사항

Before proceeding with installation, ensure your door and existing lock cylinder are compatible:

• 실린더 유형 : Confirm your existing cylinder type is compatible. This smart lock is designed to replace standard European profile 실린더.
• Cylinder Hole Size: Measure the dimensions of your door's lock cylinder hole. The required dimensions are approximately 20mm diameter, 35mm height, and 10mm width.
• 문 두께: This lock is suitable for doors with a thickness between 60mm and 85mm.

4.2 Cylinder Dimensions

The smart lock cylinder has the following dimensions:

4.3 설치 단계

1. 기존 실린더 제거: Unscrew the retaining screw on the side of your door that holds the current lock cylinder in place. Insert your key and turn it slightly (about 15-20 degrees) to align the cam, then pull the cylinder out.
2. Adjust Inner Cylinder Length: The inner cylinder length is adjustable from 30mm to 55mm. Adjust it to match the inner side of your door. The outer cylinder length is fixed at 30mm.
3. Insert Smart Lock Cylinder: Insert the AVATTO Smart Lock Cylinder into the door's cylinder hole. Ensure it fits snugly and the outer fingerprint module is correctly oriented.
4. 실린더를 고정하세요: Re-insert and tighten the retaining screw on the side of the door to secure the smart lock cylinder.
5. 배터리 설치: Open the battery compartment on the inner side of the lock. Insert 3 x 1.5V alkaline batteries (CR123A type recommended, not included). Ensure correct polarity.
6. 테스트 기능: Before closing the door, test the mechanical key and the inner knob to ensure smooth operation.

Installation typically takes about 10 minutes using a hex screwdriver (provided).

5. 설정

5.1 Smart Life App Connection

1. 앱 다운로드 : 스마트폰 앱스토어(iOS 또는 Android)에서 "스마트 라이프" 앱을 다운로드하세요.
2. 등록/로그인: Smart Life 계정을 새로 만들거나 기존 계정에 로그인하세요.
3. 장치 추가: In the app, tap '+' to add a new device. Select 'Security & Video Surveillance' > 'Smart Lock' or search for 'AVATTO Smart Lock'.
4. 블루투스를 통해 페어링 : Ensure your phone's Bluetooth is enabled. The app will guide you through the pairing process. The lock uses Bluetooth protocol with an effective transmission range of 50 meters.
5. 원격 제어(선택 사항): For remote control functionality outside the Bluetooth range (e.g., from office or on the go), an AVATTO Bluetooth Gateway (sold separately) is required. Connect the gateway to your home Wi-Fi and link it to the lock via the Smart Life app.

5.2 Adding Users and Unlocking Methods

Through the Smart Life app, you can manage various unlocking methods:

• 지문 등록: Follow the in-app instructions to register fingerprints. You will typically need to place your finger on the sensor multiple times from different angles.
• RFID 카드 등록: In the app, select to add an RFID card, then present the RFID card to the lock's sensor as instructed.
• 사용자 관리: Add new users, assign specific unlocking methods (fingerprint, RFID, app), and set administration permissions.

6. 사용 설명서

6.1 잠금 해제

• 지문 잠금 해제: 등록된 손가락을 지문 센서에 대세요. 지문이 인식되면 잠금이 해제됩니다.
• RFID 카드 잠금 해제: Present a registered RFID card to the lock's sensor. The lock will unlock upon recognition.
• Smart Life App Unlock: Open the Smart Life app, select your lock, and tap the unlock button. This works via Bluetooth or remotely if a gateway is connected.
• 기계식 키 잠금 해제: Insert one of the provided mechanical keys into the keyhole and turn to unlock the door.

6.2 잠금

• 자동 잠금: The lock may be configured for automatic locking after a set period.
• 수동 잠금 : From the inside, turn the knob to lock the door. From the outside, the lock will automatically engage after closing, or you can manually lock it via the app.

7. 유지관리

7.1 배터리 관리

The lock requires 3 x 1.5V alkaline batteries. Batteries are not included.

• 배터리 상태: You can check the battery level through the Smart Life app interface.
• 배터리 부족 경고: The lock will provide an indication (e.g., sound or light) when batteries are low. Replace them promptly.
• 배터리 교체: When replacing batteries, ensure the lock is in an unlocked state if possible. Open the battery compartment, remove old batteries, and insert new ones with correct polarity.

7.2 비상 잠금 해제

In case of completely drained batteries, you can still access your property:

• 기계식 키: Use one of the provided mechanical keys to unlock the door.
• 외부 전원 : The lock features a USB port for emergency power. Connect a portable power bank to the USB port to temporarily power the lock and unlock it using a registered fingerprint, RFID card, or the app.

8. 문제 해결

• 잠금 장치가 응답하지 않습니다. Check battery level. Replace batteries if low. Ensure the lock is properly installed and not obstructed.
• 지문이 인식되지 않습니다: 손가락이 깨끗하고 건조한지 확인하세요. 앱에서 지문을 다시 등록해 보세요.
• RFID 카드가 작동하지 않습니다. Ensure the card is registered. Try re-registering the card.
• 앱 연결 문제: Ensure Bluetooth is enabled on your phone. If using remote control, check the AVATTO Bluetooth Gateway's connection to Wi-Fi and the lock. Restart the app or your phone.
• Motor sounds but latch doesn't move: This could indicate an obstruction or incorrect installation. Recheck the cylinder's alignment and ensure no parts are binding.
• Lock is unresponsive after battery change: Ensure batteries are inserted with correct polarity. If issues persist, contact support.

9. 사양

10. 보증 및 지원

For warranty information and technical support, please refer to the documentation provided with your purchase or contact AVATTO customer service through their official website or the retailer where the product was purchased. Please have your model number (SDL-S1-B60) and purchase details ready when contacting support.